柔性抛光工具与工件接触区应力的测量方法与分布规律研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (9): 1107-1111.

柔性抛光工具与工件接触区应力的测量方法与分布规律研究

计时鸣;郑高安;金明生;张利;张伟东;侯海鹏

浙江工业大学特种装备制造与先进加工技术教育部重点实验室，杭州，310032

出版日期:2011-05-10 发布日期:2011-05-17
基金资助:
国家自然科学基金资助项目(50575208)；浙江省自然科学基金资助项目(M503099)；浙江省科技计划重点资助项目(2006C21041)
National Natural Science Foundation of China（No.50575208）;

Zhejiang Provincial Natural Science Foundation of China（No. M503099）;
Henan Provincial Science and Technology Key Program ( No. 2006C21041)

Study on Measuring Method and Distribution Law of Stress of Contact Area between Bonnet Polishing Tool and Workpiece

Ji Shiming;Zheng Gaoan;Jin Mingsheng;Zhang Li;Zhang Weidong;Hou Haipeng

Key Laboratory of Special Propose Equipment and Advanced Processing Technology,Ministry of Education,Zhejiang University of Technology, Hangzhou, 310032

Online:2011-05-10 Published:2011-05-17
Supported by:

National Natural Science Foundation of China（No.50575208）;

Zhejiang Provincial Natural Science Foundation of China（No. M503099）;
Henan Provincial Science and Technology Key Program ( No. 2006C21041)

摘要/Abstract

摘要：

提出一种用于测量柔性抛光工具与被加工工件之间接触区应力分布的方法。该方法通过柔性橡胶球头与工件试样之间的振动接触提升接触区温度，借助红外测温技术获得接触区温度分布，从而得到接触区的应力分布。基于热弹性效应和Hertz接触理论，推导出试样材料特性、接触区应力分布和接触区温度变化三者间的关系，并以旋转体橡胶球头和刚性平面试样接触为例进行了试验验证。研究结果表明：在接触区内，温度与应力变化均呈“M”形分布，其中温度变化与主应力正相关，同时还与热扩散系数、热膨胀系数以及热导率等材料特性相关。

关键词:

橡胶球头, Hertz接触理论, 热弹性效应, 应力分布, 温度分布

Abstract:

A measuring method for contact area stress distributions measurement between rubber indenter and rigid surface was proposed. The temperature of contact area was changed by vibration contact, and temperature distribution was obtained with the aid of infrared temperature-measurement. Based on Hertz contact theory and thermoelastic effect, the relationship among the material properties, contact stress distribution and the temperature change was established, and it was validated by taking the contact area between rotator rubber indenter and rigid flat surface as an example. The results show that the temperature and the stress lines change as the “M” in the contact area. The temperature has a positive correlation with the stress. Meanwhile, it is correlated with the raw material properties, such as the thermal diffusion coefficient, thermal diffusivity and coefficient of thermal conductivity.

Key words:

rubber indenter, Hertz contact theory, thermoelastic effect, stress distribution, temperature distribution

中图分类号:

TH123.4

计时鸣, 郑高安, 金明生, 张利, 张伟东, 侯海鹏.

柔性抛光工具与工件接触区应力的测量方法与分布规律研究

[J]. 中国机械工程, 2011, 22(9): 1107-1111.

JI Shi-Ming, ZHENG Gao-An, JIN Meng-Sheng, ZHANG Li, ZHANG Wei-Dong, HOU Hai-Feng.

Study on Measuring Method and Distribution Law of Stress of Contact Area between Bonnet Polishing Tool and Workpiece

[J]. China Mechanical Engineering, 2011, 22(9): 1107-1111.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2011/V22/I9/1107

[1]	琚春, 刘佳, 杨胜强, 张晶晶, 赵旭辉, . 叶片前后缘识别及百叶轮抛磨工艺研究[J]. 中国机械工程, 2023, 34(22): 2674-2683，2692.
[2]	冯建有, 戚晓利, 童靳于. 三排柱式回转支承非理想Hertz接触特性分析[J]. 中国机械工程, 2017, 28(04): 398-403.
[3]	申杰斌, 唐东林. 一种考虑应力梯度的疲劳寿命预测方法[J]. 中国机械工程, 2017, 28(01): 40-44.
[4]	沈晔超1, 宋守许1, 王玉琳1, 杜长春2. 基于汽车驱动桥壳再制造的堆焊可靠性研究[J]. 中国机械工程, 2013, 24(5): 676-680.
[5]	马军1, 葛世荣2, 张德坤2. 钢丝绳三维接触模型及丝间应力分布研究[J]. 中国机械工程, 2012, 23(7): 864-868.
[6]	康静, 左敦稳, 孙玉利, 朱永伟. 固结磨料抛光去除均匀性的仿真与实验研究 [J]. 中国机械工程, 2011, 22(7): 803-807.
[7]	赵新泽, 高伟, 秦红玲. 绞制线邻层线股间接触分析 [J]. 中国机械工程, 2011, 22(16): 1929-1933.
[8]	陈守俊, 李强, 张毅, 安琦. 圆锥管连接螺纹牙变形及应力分布研究 [J]. 中国机械工程, 2010, 21(17): 2044-2049.
[9]	毛月新;沈雪瑾;陈晓阳;潘国良;. 偏载滚子轴承的接触应力分布计算及其滚子凸度设计[J]. J4, 2009, 20(16): 0-1895.
[10]	钱文学;尹晓伟;由美雁;何雪浤;谢里阳;;. 基于多轴疲劳模型的轮盘低循环疲劳寿命预测[J]. J4, 2009, 20(07): 0-881.