球管焊接节点焊接残余应力影响因素研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (7): 808-812.

球管焊接节点焊接残余应力影响因素研究

袁志军1;扶名福1,2

1.南昌大学，南昌，330031

2.南昌工程学院，南昌，330099

出版日期:2011-04-10 发布日期:2011-04-15
基金资助:
高等学校博士学科点专项科研基金资助项目(20050403002)
Specialized Research Fund for the Doctoral Program of Higher Education of China（No. 20050403002）

Research on Influence Factors on Welding Residual Stress in Ball-Pipe Joints

Yuan Zhijun1;Fu Mingfu1，2

1.Nanchang University, Nanchang, 330031

2.Nanchang Institute of Technology, Nanchang, 330099

Online:2011-04-10 Published:2011-04-15
Supported by:
Specialized Research Fund for the Doctoral Program of Higher Education of China（No. 20050403002）

摘要/Abstract

摘要：

利用有限元法对球管焊接节点焊接残余应力的影响因素进行分析研究，获得各影响因素对该节点焊接残余应力的大小及分布情况，结果表明：球径与球壁厚度的增大将降低与球连接处的焊接应力;管径增大时，焊缝的von-Misses等效应力及Z向焊接应力均会增大。

关键词:

球管焊接, 球管节点, 焊接残余应力, 影响因素

Abstract:

The magnitude and the distribution of the welding residual stress of such joints were researched with FEM method considering some different influence factors, and welding residual stress near the ball will reduce along with the increase of the thickness and diameter of the ball. And the welding residual Von-Misses stress and Z component stress will increase with the pipe diameter enlargement.

Key words: ball and pipe weld, ball and pipe joint, welded residual stress, influence factor

中图分类号:

TG40

袁志军, 扶名福.

球管焊接节点焊接残余应力影响因素研究

[J]. 中国机械工程, 2011, 22(7): 808-812.

YUAN Zhi-Jun, FU Ming-Fu.

Research on Influence Factors on Welding Residual Stress in Ball-Pipe Joints

[J]. China Mechanical Engineering, 2011, 22(7): 808-812.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2011/V22/I7/808

[1]	张勇, 綦秀玲. 随焊冲击旋转挤压控制LD10薄板件焊接变形和热裂纹的研究[J]. 中国机械工程, 2013, 24(13): 1817-1821.
[2]	张浩然, 张人佶, 颜永年, 林峰. 重型装备中坎合因数影响因素的实验研究 [J]. J4, 2009, 20(23): 2824-2827.