基于制造任务参数距离模型的协同制造链优化构建

中国机械工程 ›› 2011, Vol. 22 ›› Issue (2): 184-189.

基于制造任务参数距离模型的协同制造链优化构建

程方启1;叶飞帆2

1.浙江工商职业技术学院,宁波,315012

2.宁波大学,宁波,315211

出版日期:2011-01-25 发布日期:2011-01-27
基金资助:
国家自然科学基金资助项目(70871062)
National Natural Science Foundation of China（No. 70871062）

Optimization Construction of Collaborative Manufacturing Chain Based on Distance Model of Manufacturing Task Parameters

Cheng Fangqi1;Ye Feifan2

1,Zhejiang Business Technology Institute,Ningbo,Zhejiang,315012

2.Ningbo University，Ningbo,Zhejiang,315211

Online:2011-01-25 Published:2011-01-27
Supported by:
National Natural Science Foundation of China（No. 70871062）

摘要/Abstract

摘要：

为了在网络环境下构建有效的企业协同制造联盟,基于制造任务与制造资源之间的相互协调提出了协同制造链的概念;通过对制造任务参数的形式化描述和协同制造链优化过程的分析,建立了基于制造任务参数距离的优化模型。基于自适应遗传算法，以某金属制品公司一种产品的制造过程为例进行分析，计算过程说明该算法设计在寻优过程中优于逼近理想解排序法(TOPSIS法),可有效扩大搜索区间。结果分析表明，从制造任务属性参数角度出发对协同制造链进行优化是可行的。

关键词:

制造任务参数, 协同制造链, 距离模型, 自适应遗传算法

Abstract:

To construct an effective collaborative manufacturing alliance of enterprises under network environment, a conception of CMC was presented.Through analyzing the formal description of the manufacturing task parameters and the optimization construction process of CMC,an optimization model based on the distance of the manufacturing task parameters was founded. Based on the adaptive genetic algorithm,

a case calculation was conducted with the manufacturing process of a metal product enterprise. The calculation analysis indicates that it is better than that of the TOPSIS approach in extending the effective search interval. The results show that it is feasible to optimize the CMC from the manufacturing task parameters.

Key words:

manufacturing task parameter, collaborative manufacturing chain(CMC), distance model, adaptive genetic algorithm

中图分类号:

TH166

程方启, 叶飞帆.

基于制造任务参数距离模型的协同制造链优化构建

[J]. 中国机械工程, 2011, 22(2): 184-189.

CHENG Fang-Qi, XIE Fei-Fan.

Optimization Construction of Collaborative Manufacturing Chain Based on Distance Model of Manufacturing Task Parameters

[J]. China Mechanical Engineering, 2011, 22(2): 184-189.

[1]	王跃飞, 韩江洪, 张建军, 彭浩. 基于实时调度与图分割的汽车网络结构设计研究 [J]. 中国机械工程, 2010, 21(13): 1623-1626,1637.
[2]	唐卫宁;徐福缘;. 基于改进混合蚁群算法的大批量定制协同制造链优化 [J]. J4, 2008, 19(23): 0-2897.