面向产品设计的BOM配置研究

中国机械工程 ›› 2010, Vol. 21 ›› Issue (20): 2468-2474.

面向产品设计的BOM配置研究

曾富洪1,2;周丹1;郭刚2

1.攀枝花学院,攀枝花,617000

2.重庆大学,重庆,400044

出版日期:2010-10-25 发布日期:2010-10-29
基金资助:
国家科技支撑计划资助项目(2006BAF01A41)；国家高技术研究发展计划(863计划)资助项目(2007AA04Z1B1)；重庆市科技攻关计划资助项目(2006AA2016)
The National Key Technology R&D Program（No. 2006BAF01A41）;

National High-tech R&D Program of China (863 Program) （No. 2007AA04Z1B1）;
Key Technology R&D Program of Chongqing（No. 2006AA2016）

Research on BOM Configuration Based on Product Design

Zeng Fuhong 1,2;Zhou Dan1;Guo Gang2

1.Panzhihua University,Panzhihua,Sichuan,617000

2.Chongqing University,Chongqing,400044

Online:2010-10-25 Published:2010-10-29
Supported by:

The National Key Technology R&D Program（No. 2006BAF01A41）;

National High-tech R&D Program of China (863 Program) （No. 2007AA04Z1B1）;
Key Technology R&D Program of Chongqing（No. 2006AA2016）

摘要/Abstract

摘要：

为了将产品自动配置技术有效融入产品开发之中,从而提高产品的开发效率,提出了BOM知识体（KBOM）的理念,并建立了基于KBOM的可重用、可共享的产品配置模型,以表达领域知识;然后将配置模型映射成为动态约束满足问题（DSCP）,进而设计了将回溯法、优选法和最邻近相似匹配法融入其中的分级遍历算法来求解DSCP,并给出了算法的实现流程;最后,以某企业的齿轮泵设计为应用实例,验证了所述方法的可行性和有效性。

关键词:

BOM知识体, BOM, BOM配置, 动态约束满足问题

Abstract:

In order to implement product development efficiently by being blended with autoconfiguration technology,a concept of KBOM was put forward.The reusable and sharable configuration models of products were established to represent domain-specific knowledge based on KBOM. then the configuration model was mapped to DCSP.

To solve the DSCP a graded traversal algorithm which was blended with backtracking algorithm and optimum seeking algorithm and similarity matching algorithm was designed and its inference process was provided.Finally, a configurable gear pump case was presented to verify

the effectiveness and feasibility of the presented approach.

Key words:

knowledge body based on BOM(KBOM), bilt of material(BOM), BOM configuration, dynamic constraint satisfaction problem(DCSP)

中图分类号:

TP31

曾富洪, 周丹, 郭刚.

面向产品设计的BOM配置研究

[J]. 中国机械工程, 2010, 21(20): 2468-2474.

CENG Fu-Hong, ZHOU Dan, GUO Gang.

Research on BOM Configuration Based on Product Design

[J]. China Mechanical Engineering, 2010, 21(20): 2468-2474.

参考文献

[1]但斌[1],姚玲[1],经有国[1],王江平[1],郭钢[2].基于产品族实例本体模型的产品配置方法研究[J].计算机集成制造系统,2009,15(4):645-651.
[2]邵伟平[1],刘永贤[1],郝永平[2],曾鹏飞[2].基于分布式约束满足的产品配置研究[J].东北大学学报：自然科学版,2007,28(1):103-106.
[3]李志华[1],顾广华[2].齿轮泵齿轮基本参数的优化设计[J].江西农业大学学报,1997,19(3):132-136.
[4]曾富洪.产品数据管理中BOM管理的研究与实践[D]重庆大学,重庆大学2003.
[5]Jinn-Yi Yeh,Tai-Hsi Wu,Ju-Ming Chang.Parallel genetic algorithms for product configuration management on PC cluster systems[J]. The International Journal of Advanced Manufacturing Technology . 2007 (11-12)
[6]Tsenga Hwaien,Chang Chien-chen.Applying Case-based Reasoning for Product Configuration in Mass Customization Environments. Expert Sys-tems with Applications . 2009
[7]Bru Gnach M.Determining the Significance of Threshold Values Uncertainty in Rule-based Clas-sification Models. Ecological Modelling . 2003
[8]Yang Dong,Miao Rui,Wu Hongwei,et al.Product Configuration Knowledge Modeling Using Ontology Web Language. Expert Systems with Applica-tions . 2009
[9]Heinrich M.A Resource-based Paradigm for the Configuring of Technical Systems from Modular Components. Proceedings of the7th IEEE Con-ference on Artificial Intelligence Applications . 1991
[10]HOTZ L,KREBS T,WOLTER K.Using a structure-based configuration tool for product derivation. Proceedings of the19th International Conference on Automated Software En-gineering . 2004
[11]Brown DC.Defining configuring. Artificial Intelligence . 1998
[12]H. Xie,,P. Henderson,M. Kernahan.Modeling and solving engineering product configuration proldems by constraint satisfaction. Interational Journal of Production Research . 2005