磁悬浮轴承开关功率放大器系统建模及控制研究

中国机械工程 ›› 2010, Vol. 21 ›› Issue (04): 477-481.

磁悬浮轴承开关功率放大器系统建模及控制研究

王军;徐龙祥

南京航空航天大学,南京,210016

出版日期:2010-02-25 发布日期:2010-03-10
基金资助:
国家自然科学基金资助项目(50437010)；国家863高技术研究发展计划资助项目(2006AA05Z205)；江苏省“六大人才高峰”资助项目(07-D-013)
National Natural Science Foundation of China（No. 50437010）;
National High-tech R&D Program of China (863 Program) （No. 2006AA05Z205）

System Modeling and Control for Switching Power Amplifier of Magnetic Bearings

Wang Jun;Xu Longxiang

Nanjing University of Aeronautics and Astronautics,Nanjing,210016 

Online:2010-02-25 Published:2010-03-10
Supported by:

National Natural Science Foundation of China（No. 50437010）;
National High-tech R&D Program of China (863 Program) （No. 2006AA05Z205）

摘要/Abstract

摘要：

磁悬浮轴承开关功率放大器系统为一非线性系统,开关功率放大器的性能影响磁悬浮轴承控制系统的稳定性,为此,提出了一种建立磁悬浮轴承开关功率放大器系统模型的方法。在分析三电平功率放大器工作原理的基础上，对系统中非线性部分进行分析，以相应的傅里叶级数表达式来代替，建立了非线性网络的传递函数并推导了开关功率放大器闭环系统的稳态数学模型。MATLAB软件的仿真和试验验证结果表明,该系统模型能有效反映开关功率放大器和闭环控制系统的实际工作特性，建模的方法是可行有效的。

关键词:

开关功率放大器, 系统模型, 磁悬浮轴承；闭环系统

Abstract:

Switching power amplifier of magnetic bearing was a nonlinear system.The performance of the switching power amplifier affected the stability of the magnetic bearing control system.A way of establishing the closed-loop system model of magnetic bearing was presented.Based on the analysis of three-level power amplifier principle, the nonlinear circuit model was replaced by using Fourier series and the transfer function of the nonlinear net was established.A closed-loop system math model of three-level power amplifier was obtained.The model was verified by MATLAB simulations and experiments.The results show that the deduced system model can effectively reflect the actual characteristics of control system for three-level power amplifier and the proposed model is feasible and effective.

Key words: switching power amplifier, system model, magnetic bearing, closed-loop system

中图分类号:

王军, 徐龙祥.

磁悬浮轴承开关功率放大器系统建模及控制研究

[J]. 中国机械工程, 2010, 21(04): 477-481.

WANG Jun, XU Long-Xiang.

System Modeling and Control for Switching Power Amplifier of Magnetic Bearings

[J]. China Mechanical Engineering, 2010, 21(04): 477-481.

参考文献

[1]徐龙祥,周瑾主编.机械设计[M],2008:435.
[2]徐龙祥[1],张金淼[1],余同正[1].H∞控制理论在磁悬浮轴承系统中的应用研究[J].中国机械工程,2006,17(10):1060-1064.
[3]Wang Fengxiang, Zong Ming, Zheng Wenpeng, et al. Design Features of High Speed PM Machine[C]//Proceedings of the 6th International Conference on Electrical Machines and Systems. Beijing:2003,66-70.
[4]王晓琳[1],邓智泉[1],严仰光[1].一种新型的五自由度磁悬浮电机[J].南京航空航天大学学报,2004,36(2):210-214.
[5]刘贤兴[1],孙宇新[1],朱熀秋[1],王德明[1],孙玉坤[1].无轴承永磁同步电动机的发展、应用和前景[J].中国机械工程,2004,15(17):1594-1597.
[6]刘晓军[1],刘小英[1],胡业发[2],骆清铭[1].人工心脏泵磁悬浮转子非线性特性及控制方法研究[J].中国机械工程,2006,17(20):2091-2094.
[7]Liu Shuqin,Chen Darong,Xu Feng. Study of Switching Power Amplifier for Active Magnetic Bearing [C]//Proceedings of the 4th International Power Electronics and Motion Control Conference. Xi'an, 2004 : 1539-1543.
[8]Schulz A, Schneeberger M, Wassermann J. A Reliability Analysis of Switching Power Concepts for Active Magnetic Bearing[C]//Proeeedings of the IEEE International Conference on Industrial Technology. Mumbai :IEEE, 2006: 1460-1465.
[9]Carabelli S, Maddaleno F, Muzzarelli M. High Efficiency Linear Power Amplifier for Active Magnetic Bearings[J]. IEEE Transactions on Industrial Electronics,2000,47(1) :17-24.
[10]张亮[1],房建成[1].基于MATLAB的电磁轴承开关功放建模与仿真研究[J].系统仿真学报,2007,19(11):2395-2398.
[11]臧晓敏[1],王晓琳[1],仇志坚[1],邓智泉[1].磁轴承开关功放中电流三态调制技术的研究[J].中国电机工程学报,2004,24(9):167-172.
[12]Zhang Liang, Fang Jiancheng, Liu Gang. Modeling and Simulation of the Switching Power Amplifier for Magnetic Suspending Flywheel[C]//Proceedings of the Eighth International Symposium on Magnetic Suspension Technology. Dresden, 2005: 240-244.
[13]Buding P K,Werner R. Stiffness of Magnetic Bearings[C]//Proceedings of the Fourth International Symposium on Magnetic Bearings. Zurich, 1994: 251-255.
[14]Zhang Jing. Synchronous Three--level PWM Power Amplifier for Active Magnetic Bearings[C]// Proceedings of the 5th International Symposium on Magnetic Bearing. Kanazawa, 1996 : 277-282.
[15]曾学明,徐龙祥,刘正埙.电磁轴承三电平PWM功率放大器研究[J].电力电子技术,2002,36(3):13-15.
[16]张亮[1],房建成[1].电磁轴承脉宽调制型开关功放的实现及电流纹波分析[J].电工技术学报,2007,22(3):13-20.