基于EPC规范的车间层多源信息集成技术

中国机械工程 ›› 2010, Vol. 21 ›› Issue (03): 319-324,377.

基于EPC规范的车间层多源信息集成技术

王东强;鄢萍;刘飞;任凡

重庆大学机械传动国家重点实验室，重庆，400030

出版日期:2010-02-10 发布日期:2010-03-08

Multi-source Information Integrated Technology of Workshop Based on EPC Criterion

Wang Dongqiang;Yan Ping;Liu Fei;Ren Fan

State Key Lab of Mechanical Transmissions,Chongqing University, Chongqing, 400044

Online:2010-02-10 Published:2010-03-08

摘要/Abstract

摘要：

构造了一种基于产品电子代码规范的车间层多源信息智能集成的系统模型,实现了车间设备数据、人力资源、生产物流等多源制造信息与上层应用系统之间的无缝交互与集成。论述了该模型实现车间层与企业内部、外部系统的信息集成的层次结构及数据流程，介绍了其多源信息格式定义及数据交互模式设计。应用案例研究表明，该系统模型在支持车间快速响应能力提升、实施网络化制造和制造业信息化向车间底层的深化等方面具有广阔的应用前景。

关键词:

产品电子代码(EPC)规范, 多源信息, 智能集成, 系统模型



Abstract:

The architecture of multi-source information integrated system model based on EPC criterion was established,which can carry out equipment data, human resources and production logistics information interaction between shop - floor equipment and top - level application systems. The method using multi-source information integrated system model to integrate multi-source information into enterprise interior and exterior systems was discussed, the multi-source information data format and the interactive mode design were introduced.The case study shows that the system model has great prospects in improving the response ability, implementing networked manufacturing, and deepening of building digital enterprises.

Key words: EPC(electronic product code) criterion, multi-source information, integrated, system model

中图分类号:

TP311

王东强, 鄢萍, 刘飞, 任凡.

基于EPC规范的车间层多源信息集成技术

[J]. 中国机械工程, 2010, 21(03): 319-324,377.

WANG Dong-Jiang, YAN Ping, LIU Fei, LIN Fan.

Multi-source Information Integrated Technology of Workshop Based on EPC Criterion

[J]. China Mechanical Engineering, 2010, 21(03): 319-324,377.

参考文献

[1]Parlikad A K, McFarlane D C. RFID--based Product Information in End- of--life Decision Making [J]. Control Engineering Practice, 2007,15: 1348- 1363.
[2]秦开涌[1],胡业发[1],丁毓峰[1].条形码技术在生产信息采集系统中的应用[J].计算机工程与应用,2005,41(23):206-208.
[3]夏绪辉[1],贺德强[2],路向阳[2].网络化制造中设备层信息集成框架研究[J].中国机械工程,2006,17(9):907-911.
[4]刘飞,祁国宁,宁汝新,等.先进制造系统及管理运作[R].国家自然科学基金委员会学科发展战略研究报告.北京:科学出版社,2006.
[5]Ferguson N, Browne J. Issues in EOL Product Recovery and,Reverse Logistics[J].Production Planning & Control, 2001,12 : 534-547.
[6]Harrison M, McFarlane D C, Parlikad A K, et al. Information Management in the Product Lifecycle-the Role of Networked RFID[C]//Proceedings of the Second IEEE International Conference on Industrial Informatics INDIN' 04. Berlin, 2004 :47-57.
[7]Qiu R, Russell D. A Formal Model for Incorporating Shop Floor Controls Into Plant Information Systems[J]. International Journal of Advanced Manufacturing Technology, 2004,23 (1/2) : 47-57.
[8]杨宏安[1],孙树栋[1],徐娅萍[1],司书宾[1].可重构车间管理信息平台研究与实现[J].中国机械工程,2006,17(17):1793-1797.
[9]Tibben--Lembke R S, Rogers D S. Differences Between Forward and Reverse Logistics in a Retail Environment [J].Supply Chain Management, 2002,7 :271-282.
[10]Ktausner M, Grimm W M. Sensor--based Data Recording of Use Conditions for Product Takeback[C]//Proceedigns of the IEEE International Symposium on Electronics and the Environment. Oak Brook, IL, USA, 1998 : 138-143.
[11]Simon M, Bee G, Moore P,et al. Modelling of the Life Cycle of Products with Data Acquisition Features[J]. Computers in Industry, 2001,45: 111- 122.