一种具有各向同性的3-PPRRR移动并联机构

J4 ›› 2009, Vol. 20 ›› Issue (10): 0-1140.

• 机械科学 • 下一篇

一种具有各向同性的3-PPRRR移动并联机构

王英;李秦川;武传宇;胡旭东

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2009-05-25 发布日期:2009-05-25

A 3-DOF 3-PPRRR Translational Parallel Mechanism with Fully-isotropy

Wang Ying;Li Qinchuan;Wu Chuanyu;Hu Xudong 

Received:1900-01-01 Revised:1900-01-01 Online:2009-05-25 Published:2009-05-25

摘要/Abstract

摘要：

提出一种具有完全各向同性的3-PPRRR移动并联机构，该机构每个分支由2个移动副和3个转动副组成，其中第一移动副和第二移动副垂直
第一转动副轴线与第三转动副轴线相互平行，第二转动副轴线垂直于第一转动副轴线，3个分支呈正交布置。运用螺旋理论得出如下结论：单个PPRRR分支对动平台施加1个约束力偶，在正交布置条件下，3个分支约束力偶线性无关，约束动平台的3个转动自由度,第一移动副可作为驱动副。根据此自由度特性可证明各个PPRRR分支中第二转动副为消极副，进而简化该机构的运动学分析，得到3-PPRRR并联机构的位置、速度和加速度的正逆解关系以及工作空间，结果表明该机构具有3个完全解耦的移动自由度和完全各向同性。

关键词: 并联机构；螺旋理论；运动学；各向同性

Abstract:

A novel 3-PPRRR parallel mechanism with three translational degrees of freedom was presented.The limb chain of the 3-PPRRR parallel mechanism
consisted of two prismatic pairs and three revolute pairs.The first prismatic pair was perpendicular to
the second prismatic pair.The axis of the first revolute pair was parallel to the third revolute pairs.The axis of the second revolute pair was perpendicular to the first revolute axis.The three limb chains were arranged orthogonally.The constraint analysis of the 3-PPRRR
parallel mechanism was performed by using screw theory.It is shown that the three
PPRRR limb exerts three independent constraint couples on the moving platform,which
restricts three rotational degrees of freedom of the moving platform.The validity of the first prismatic pair being actuated is verified.Further,it is proved that the second revolute pair in each limb
is inactive based on the mobility features of the 3-PPRRR parallel mechanism,which simplifies the kinematic analysis of the 3-PPRRR parallel mechanism.The forward and inverse position,velocity and acceleration analysis,and workspace are discussed.The three translational degrees of freedom of the 3-PPRRR parallel mechanism are completely decoupled and the mechanism is fully-isotropic.

Key words: parallel mechanism;screw theory;kinematics;isotropy

中图分类号:

TH112

王英;李秦川;武传宇;胡旭东;. 一种具有各向同性的3-PPRRR移动并联机构[J]. J4, 2009, 20(10): 0-1140.

Wang Ying;Li Qinchuan;Wu Chuanyu;Hu Xudong . A 3-DOF 3-PPRRR Translational Parallel Mechanism with Fully-isotropy[J]. J4, 2009, 20(10): 0-1140.

[1]	李树军;张余;孟巧玲;. 6-PSS空间并联机构的刚度特性[J]. J4, 2009, 20(21): 0-2525.
[2]	郭晓宁;邹炎火;窦宁;. 基于瞬心的六杆机构死点位置研究[J]. J4, 2009, 20(14): 0-16391642.
[3]	杨世明;金国光;贠今天;冯志友;. 变胞机构冲击运动的研究[J]. J4, 2009, 20(13): 0-1624.
[4]	李秦川;陈欢欢;李昳;胡旭东;. 3-PC(RR)N球面三自由度并联机构的运动学分析[J]. J4, 2009, 20(11): 0-1385.
[5]	文桂林;;崔中;彭克立;. 基于近似模型的高速磨床零部件结构优化设计研究[J]. J4, 2009, 20(08): 0-886.
[6]	黄勇刚;黄茂林;杜力;. 少自由度并联机器人构型特征研究[J]. J4, 2009, 20(06): 0-673.
[7]	姜铭;;李鹭扬;易红;周建华;. 并联转动机构RGRR的研究及分析[J]. J4, 2009, 20(05): 0-629.
[8]	郭盛;方跃法;付高阁;岳聪;. 单闭环一自由度过约束机构解析综合[J]. J4, 2009, 20(04): 0-503.
[9]	王雯静;余跃庆;. 平面柔顺四杆机构的驱动特性分析[J]. J4, 2009, 20(02): 0-130.
[10]	黄勇刚;黄茂林;向成宣;秦大同;. 无过约束少自由度并联机器人构型设计方法[J]. J4, 2009, 20(02): 0-251.
[11]	冯志友;;张策;杨廷力;. 2UPS-2RPS机构正运动学分析的序单开链法[J]. J4, 2008, 19(24): 0-2907.
[12]	陆永华;赵东标;云乃彰;刘凯;. 基于电流信号的电解加工间隙在线检测试验研究[J]. J4, 2008, 19(24): 0-2922.
[13]	段福海;胡青春;谢存禧. 钢/塑料齿轮组合行星传动的固有特性分析[J]. J4, 2008, 19(20): 0-2399.
[14]	赵利平;王宗彦;秦慧斌;董良;. 面向大规模定制的堆垛机快速设计系统研究[J]. J4, 2008, 19(18): 0-2161.
[15]	王宗勇;龚斌;闻邦椿. 阻尼突变转子系统的动力学研究[J]. J4, 2008, 19(18): 0-2165.

一种具有各向同性的3-PPRRR移动并联机构

A 3-DOF 3-PPRRR Translational Parallel Mechanism with Fully-isotropy

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics