[1]PERVAIZ S, ANWAR S, QURESHI I, et al. Recent Advances in the Machining of Titanium Alloys using Minimum Quantity Lubrication (MQL) Based Techniques[J]. International Journal of Precision Engineering and Manufacturing-Green Technology, 2019, 6(1):133-145.
[2]TOSUN N, PIHTILLI H. Gray Relational Analysis of Performance Characteristics in MQL Milling of 7075 Alloy[J]. The International Journal of Advanced Manufacturing Technology, 2010, 46(5/8):509-515.
[3]KOLAHDOUZ S,HADI M, AREZOO B, et al. Investigation of Surface Integrity in High Speed Milling of Gamma Titanium Aluminide under Dry and Minimum Quantity Lubricant Conditions[J]. Procedia CIRP, 2015,26:367-372.
[4]袁松梅,朱光远,王莉.绿色切削微量润滑技术润滑剂特性研究进展[J].机械工程学报,2017,53(17):131-140.
YUAN Songmei, ZHU Guangyuan, WANG Li. Recent Progress on Lubricant Characteristics of Minimum Quantity Lubrication (MQL) Technology in Green Cutting[J]. Journal of Mechanical Engineering, 2017,53(17):131-140.
[5]TAMANG S K, CHANDRASEKARAN M, SAHOO A K. Sustainable Machining:an Experimental Investigation and Optimization of Machining Inconel 825 with Dry and MQL Approach[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering,2018,40:374.
[6]BABU M N, ANANDAN V, MUTHUKRISHNAN N, et al. End Milling of AISI 304 Steel Using Minimum Quantity Lubrication[J]. Measurement, 2019, 138:681-689.
[7]BENJAMIN D M, SABARISH V N, HARIHARAN M V,et al. On the Benefits of Sub-zero Air Supplemented Minimum Quantity Lubrication Systems:an Experimental and Mechanistic Investigation on End Milling of Ti-6-Al-4-V Alloy[J]. Tribology International, 2018,119:464-473.
[8]MARUDAR W, KROLCZYK G M, FELDSHTEIN E,et al. A Study on Droplets Sizes, Their Distribution and Heat Exchange for Minimum Quantity Cooling Lubrication (MQCL)[J]. International Journal of Machine Tools & Manufacture, 2016,100:81-92.
[9]LIU Z Q, CAI X J, CHEN M, et al. Investigation of Cutting Force and Temperature of End-milling Ti-6Al-4V with Different Minimum Quantity Lubrication(MQL) Parameters[J]. Proceedings of the Institution of Mechanical Engineers, Part B:Journal of Engineering Manufacture, 2011, 225(8):1273-1279.
[10]RAHIM E A,DORAIRAJU H. Evaluation of Mist Flow Characteristic and Performance in Minimum Quantity Lubrication (MQL) Machining[J]. Measurement, 2018,123:213-225.
[11]张松,张成良,石文浩,等.MQL条件下的油滴覆盖率及尺寸分布研究[J].机械工程学报,2018,54(3):169-177.
ZHANG Song, ZHANG Chengliang, SHI Wenhao, et al. Investigation of Oil Droplet Coverage Rate and Droplet Size Distribution under Minimum Quantity Lubrication Condition[J]. Journal of Mechanical Engineering, 2018, 54(3):169-177.
[12]汤羽昌,何宁,赵威,等.基于微量润滑的两级雾化仿真与试验研究[J].工具技术,2013,47(1):3-6.
TANG Yuchang, HE Ning, ZHAO Wei, et al.Simulation of Two-stage Atomization and Experimental Study on Minimum Quantity Lubrication[J]. Journal of Tool Engineering, 2013, 47(1):3-6.
[13]曹建明.喷雾学[M]. 北京:机械工业出版社, 2005:82-105.
CAO Jianming. Spray Science[M]. Beijing:China Machine Press, 2005:82-105.
[14]陈建文, 张志伟 , 王长周,等. 液体黏度和表面张力对雾化颗粒粒径的影响[J].东北大学学报(自然科学版),2010,31(7):1023-1025.
CHEN Jianwen, ZHANG Zhiwei, WANG Changzhou, et al. Effects of Fluid Viscosity and Surface Tension on the Size of Atomized Droplets[J]. Journal of Northeastern University(Natural Science), 2010,31(7):1023-1025.
[15]ASHGRIZ N. Handbook of Atomization and Sprays[M]. New York:Springer, 2011 .
[16]刘晓丽, 李亮, 赵威,等.基于微量润滑的切削油雾化特性测试与分析[J]. 工具技术, 2011,45(12):16-18.
LIU Xiaoli, LI Liang, ZHAO Wei, et al. Study on Cutting Oil Mist Spray Characteristic Based on Minimum Quantity Lubrication[J]. Tool Engineering, 2011,45(12):16-18.
[17]PARK K H , OLORTEGUI-YUME J, YOON M C, et al.A Study on Droplets and Their Distribution for Minimum Quantity Lubrication (MQL)[J]. International Journal of Machine Tools & Manufacture, 2010,50:824-833.
[18]刘绍彦, 阮琳, 康玉慧,等. 喷雾冷却轴线处的雾化特性的实验研究与数值分析[J]. 科学技术与工程,2018,18(24):225-229.
LIU Shaoyan, RUAN Lin, KANG Yuhui, et al.Experimental Investigation and Numerical Analysis of Atomization Characteristics at the Spray Cooling Axis[J].Science Technology and Engineering,2018, 18(24) :225-229.
[19]ISKANDAR Y, TENDOLKAR A, ATTIA M H, et al.Flow Visualization and Characterization for Optimized MQL Machining of Composites[J]. CIRP Annals-Manufacturing Technology,2014,63:77-80.
[20]肖彬.内混式两相流喷嘴的雾化特性研究[J]. 科学技术与工程, 2012,12(27):6912-6917.
XIAO Bin. Studies on Internal Mixing Twin Fluid Atormzerss Atomization Characteristics[J]. Science Technology and Engineering, 2012,12(27):6912-6917. |