[1]李俊烨,胡敬磊,杨兆军,等.离散相磨粒粒径对磨粒流研抛共轨管质量的影响[J]. 吉林大学学报(工学版),2018,48(2):492-499.
LI Junye, HU Jinglei, YANG Zhaojun, et al. Effect on the Quality of Abrasive Flow Polishing the Common Rail Pipe in Size of Discrete Phase Abrasive Particle[J]. Journal of Jilin University(Engineering and Technology
Edition), 2018,48(2):492-499.
[2]乔泽民,张心明,李俊烨,等.基于均匀设计法的磨粒流加工试验[J].中国机械工程,2018,29(4):398-402.
QIAO Zemin, ZHANG Xinming, LI Junye, et al. Abrasive Flow Machining Experiments Based on Uniform Design Method[J]. China Mechanical Engineering,2018,29(4):398-402.
[3]计时鸣, 陈凯, 谭大鹏, 等. 超声空化对软性磨粒流切削效率和质量的影响[J].农业工程学报, 2017, 33(12):82-90.
JI Shiming, CHEN Kai, TAN Dapeng, et al. Effect of Ultrasonic Cavitation on Machining Efficiency and Quality of Soft Abrasive Flow[J]. Transactions of the Chinese Society of Agricultural Engineering, 2017, 33(12):82-90.
[4]丁金福, 刘润之, 张克华, 等. 磨粒流精密光整加工的微切削机理[J].光学精密工程, 2014, 22(12):3324-3331.
DING Jinfu, LIU Runzhi, ZHANG Kehua, et al. Micro Cutting Mechanism of Abrasive Flow Precision Machining[J]. Optics and Precision Engineering, 2014, 22(12):3324-3331.
[5]李俊烨, 乔泽民, 杨兆军, 等. 介观尺度下磨料浓度对磨粒流加工质量的影响[J].吉林大学学报(工学版), 2017, 47(3):837-843.
LI Junye, QIAO Zemin, YANG Zhaojun, et al. Influence of Abrasive Concentration on Processing Quality of Abrasive Flow in Mesoscopic Scale[J]. Journal of Jilin University (Engineering and Technology Edition), 2017, 47(3):837-843.
[6]陈铁牛, 郭钟宁, 曾柏文, 等. 激光诱导空泡微孔抛光机理及实验研究[J].中国机械工程, 2018, 29(3):273-278.
CHEN Tieniu, GUO Zhongning, ZENG Baiwen, et al. Study on Micro-hole Polishing Mechanism and Experiments Based on Laser-induced Cavitation Bubbles[J]. China Mechanical Engineering, 2018, 29(3):273-278.
[7]GUDIPADU V, SHARMA A K, SINGH N. Simulation of Media Behaviour in Vibration Assisted Abrasive Flow Machining[J]. Simulation Modelling Practice and Theory, 2015, 51:1-13.
[8]MARZBAN M A, HEMMATI S J. Modeling of Abrasive Flow Rotary Machining Process by Artificial Neural Network[J]. International Journal of Advanced Manufacturing Technology, 2016, 89(1/4):1-8.
[9]SINGH S, RAJ A S A, SANKAR M R, et al. Finishing Force Analysis and Simulation of Nanosurface Roughness in Abrasive Flow Finishing Process Using Medium Rheological Properties[J]. The International Journal of Advanced Manufacturing Technology, 2016, 85(9/12):2163-2178.
[10]VENKATESH G, SHARMA A K, SINGH N, et al. Finishing of Bevel Gears Using Abrasive Flow Machining[J]. Procedia Engineering, 2014, 97:320-328.
[11]李俊烨, 董坤, 王兴华, 等. 颗粒微切削表面创成的分子动力学仿真研究[J]. 机械工程学报, 2016, 52(17):94-104.
LI Junye, DONG Kun, WANG Xinghua, et al. Molecular Dynamics Simulation Research into Generative Mechanism of Particles Micro-cutting Surface[J]. Journal of Mechanical Engineering, 2016, 52(17):94-104.
[12]BOUZEID E, MENEVEAU C, PARLANGE M. A Scale-dependent Lagrangian Dynamic Model for Large Eddy Simulation of Complex Turbulent Flows[J]. Physics of Fluids, 2005, 17(2):1-19.
[13]俞建阳, 王若玉, 陈浮, 等. 不同亚格子模型的对比分析及其运用[J].工程热物理学报, 2016, 37(11):2311-2318.
YU Jianyang, WANG Ruoyu, CHEN Fu, et al. A Comparison of the Different Subgrid-scale Models and Its Application[J]. Journal of Engineering Thermophysics, 2016, 37(11):2311-2318.
[14]霍岩.基于Smagorinsky和Vreman模型的竖通道内旋转热流场大涡模拟[J].哈尔滨工程大学学报,2015,36(6):754-758.
HUO Yan. Large Eddy Simulation of Fire Whirls in a Vertical Shaft Based on Smagorinsky and Vremansubgrid-scale Models[J]. Journal of Harbin Engineering University, 2015,36(6):754-758.
[15]DHOTRE M T, NICENO B, SMITH B L. Large Eddy Simulation of a Bubble Column Using Dynamic Sub-grid Scale Model[J]. Chemical Engineering Journal, 2008, 136(2/3):337-348.
[16]吴玉林, 葛亮, 陈乃祥. 离心泵叶轮内部固液两相流动的大涡模拟[J]. 清华大学学报(自然科学版), 2001, 41(10):93-96.
WU Yulin, GE Liang, CHEN Naixiang. Large Eddy Simulation of Silt-liquid Two-phase Flow through a Centrifugal Pump Impeller[J]. Journal of Tsinghua University(Science and Technology Edition), 2001, 41(10):93-96. |