[学科发展]5D打印——生物功能组织的制造

中国机械工程

[学科发展]5D打印——生物功能组织的制造

李涤尘;贺健康;王玲;高琳;卢秉恒

西安交通大学机械制造系统工程国家重点实验室，西安，710054

出版日期:2020-01-10 发布日期:2020-01-17
基金资助:
国家自然科学基金资助项目（51675411,51675412）

5D Printing—Fabrication of Biological Function Tissue

LI Dichen;HE Jiankang;WANG Ling;GAO Lin;LU Bingheng

The Key State Laboratory for Manufacturing Systems Engineering,Xi'an Jiaotong University,Xi'an,710054

Online:2020-01-10 Published:2020-01-17

摘要/Abstract

摘要： 生物制造是制造技术与生命科学技术交叉融合产生的新兴学科方向，这一学科方向的发展将为巨大的人体组织与器官市场提供新技术，同时也给制造技术变革带来新机遇。面向生物制造未来发展，提出5D打印制造概念，论述了5D打印的内涵，分析了其关键技术。结合生物制造技术的现有进展，介绍了研究团队在心肌组织支架的制造、类脑神经组织制造、爬行生命机械混合机器人方面取得的初步研究进展，为生物制造技术拓展新方向提供新思路。

关键词: 增材制造；5D打印, 生物制造；功能组织

Abstract: Biofabrication is an emerging multidiscipline by integrating the manufacturing technology and the life science. It offeres new technical supports for the manufacturing of large scale human tissue/organs, as well as important opportunities for the innovative development in manufacturing technology. For the future development of manufacturing, a 5D Printing was proposed. The connotation of 5D printing was discussed, and the key technical issues were put forward. Combined with the development of biofabriction technology, the fabrication of myocardium scaffolds, the brain-like neuron tissue manufacturing, and the manufacturing of the life machine hybrid crawling robots were introduced, providing new solutions for the biofabrication technology and its innovative progresses.

Key words: additive manufacturing, 5D printing, biofabrication, function tissue

中图分类号:

TB17

李涤尘, 贺健康, 王玲, 高琳, 卢秉恒. [学科发展]5D打印——生物功能组织的制造[J]. 中国机械工程.

LI Dichen, HE Jiankang, WANG Ling, GAO Lin, LU Bingheng. 5D Printing—Fabrication of Biological Function Tissue[J]. China Mechanical Engineering.

[1]	谌可, 王耘, 曹开元, 宋小文. 仿生非光滑汽车表面的减阻分析[J]. 中国机械工程, 2012, 23(8): 1001-1006.
[2]	周怡, 郭策, 朱春生, 戴振东. 具有层状纤维缠绕的仿甲虫鞘翅轻质结构的设计及其力学性能分析 [J]. 中国机械工程, 2011, 22(16): 1969-1973.