[1]陆念力,都亮,兰朋.变截面阶梯压杆精确失稳特征方程及其稳定计算实用方法——《塔式起重机设计规范》中阶梯柱计算长度的快捷计算及精度分析[J].建筑机械,2014(6):76-81.
LU Nianli, DU Liang, LAN Peng. Accurate Buckling Characteristic Equation of Stepped Column Bar and Its Stability Analysis with Practical Method:Shortcut Calculation and Accuracy Analysis with the Effective Length of Stepped Column Given in Specification for Tower Crane Design[J].Construction Machinery,2014(6):76-81.
[2]LI Wenjun, ZHAO Jiong, JIANG Zhen, et al. A Numerical Study of the Overall Stability of Flexible Giant Crane Booms[J]. Journal of Constructional Steel Research, 2015, 105: 12-27.
[3]TIMOSHENKO S P, GERE J M. Theory of Elastic Stability[M]. New York: Mc Graw-Hill, 1961: 49-63.
[4]王欣,易怀军,赵日鑫,等.一种n阶变截面压杆稳定性计算方法的研究[J].中国机械工程,2014,25(13),1744-1747.
WANG Xin, YI Huaijun, ZHAO Rixin, et al. Research on Stability Analysis Method of n-order Variable Cross-Section Compression Bars[J]. China Mechanical Engineering,2014,25(13):1744-1747.
[5]张宏生,陆念力.动臂式塔机变截面吊臂的整体稳定性分析[J].哈尔滨工业大学学报,2010,42(9):1394-1397.
ZHANG Hongsheng,LU Nianli.Global Stability Analysis of the Tapered Luffing Jib of Tower Crane[J].Journal of Harbin Institute of Technology, 2010,42(9):1394-1397.
[6]刘庆潭.复杂细长压杆临界力计算的传递矩阵法[J].力学与实践,1997(6):51-54.
LIU Qingtan. Transfer Matrix Method for the Complex Compressed Bar [J]. Mechanics in Engineering,1997(6):51-54.
[7]孙建鹏,李青宁,曹现雷.压弯杆弹性弯曲分析的精细传递矩阵法[J].北京工业大学学报,2012,38(4):536-539.
SUN Jianpeng,LI Qingning,CAO Xianlei. Precise Transfer Matrix Method for Elastic Bending Analysis of a Compressive-bending Bar[J]. Journal of Beijing University of Technology, 2012,38(4):536-539.
[8]陆念力,兰朋,李良.二阶理论条件下的梁杆系统精确有限元方程及应用[J].哈尔滨建筑大学学报,1998,31(4):67-74.
LU Nianli, LAN Peng, LI Liang.Appilication of FEM of Beam Element with Theory of ⅡOrder[J].Journal of Harbin University of Civeil Engineering Architecture,1998,31(4):67-74.
[9]陆念力,兰朋,白桦.起重机箱形伸缩臂稳定性分析的精确理论解[J].哈尔滨建筑大学学报,2000,33(2):89-93.
LU Nianli, LAN Peng, BAI Hua. Precise Stability Analysis of Telescopic Boom[J]. Journal of Harbin University of Civil Enineering Architecture,2000,33(2):89-93.
[10]陆念力,都亮.多级阶梯柱侧向刚度与轴压临界力的精确分析及其实用算式[J].工程力学,2015,32(8):217-222.
LU Nianli , DU Liang. Analysis of Lateral Stiffness and Critical Buckling Force of Stepped Columns and Their Practical Formulations[J].Engineering Mechanics ,2015,32(8):217-222.
[11]中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.GB/T 3811—2008起重机设计规范[S]. 北京:中国标准出版社, 2008.
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Repubic of China. GB/T3811—2008 Design Rules for Cranes [S]. Beijing: China Standard Press,2008.
[12]刘士明,陆念力,孟丽霞.牵绳非保向力作用下的起重臂稳定性分析[J].哈尔滨工业大学学报,2014,46(3):26-29.
LIU Shiming,LU Nianli,MENG Lixia.Stability Analysis of Telescopic Booms under Pull-rope Follower Force[J].Journal of Harbin Institute of Technology, 2014,46(3):26-29.
[13]刘士明.工程起重机伸缩臂系统结构稳定性及复合运动动力学研究[D].哈尔滨:哈尔滨工业大学,2013.
LIU Shiming. Research on Structural Stability and Complex Motion Dynamic of Telescopic Boom System in Construction Crane[D].Harbin:Harbin Institute of Technology ,2013.
[14]BAGHERI S, NIKKAR A. Higher Order Explicit Solutions for Nonlinear Dynamic Model of Column Buckling Using Variational Approach and Variational Iteration Algorithm-Ⅱ[J]. Journal of Mechanical Science and Technology, 2014, 28(11): 4605-4611. |