[1]WAQAR Q, FRANCESCA C, ANDREA M. Characterization of Fretting Wear Experiments on Spline Couplings by Principal Component Analysis[J]. Proceedings of the Institution of Mechanical Engineers, Part J:Journal of Engineering Tribology, 2017, 231(7):860-868.
[2]WAQAR Q, FRANCESCA C, ANDREA M. Experimental Characterization of Roughness Parameters for Fretting Wear in Spline Couplings[J]. Meccanica, 2017, 52(8):1975-1984.
[3]WAQAR Q, FRANCESCA C, ANDREA M. Prediction of Fretting Wear in Aero-engine Spline Couplings Made of 42CrMo4[J]. Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science, 2017, 231(24):4684-4692.
[4]FRANCESCA C, WAQAR Q, ANDREA M. A Methodological Approach for Incremental Fretting Wear Formulation[J]. Tribology Letters, 2016, 64(2):57-62.
[5]LEEN S B, RICHARDSON I J, MCCOLL I R, et al. Macroscopic Fretting Variables in a Splined Coupling under Combined Torque and Axial Load[J]. The Journal of Strain Analysis for Engineering Design, 2001, 36(5):481-497.
[6]RATSIMBA C H H, MCCOLL I R , WILLIAMS E J, et al. Measurement, Analysis and Prediction of Fretting Wear Damage in a Representative Aeroengine Spline Coupling[J]. Wear, 2004, 257:1193-1206.
[7]DING J, MCCOLL I R, LEEN S B. The Application of Fretting Wear Modelling to a Spline Coupling[J]. Wear, 2007, 262:1205-1216.
[8]DING J, SUM W S, SABESAN R, et al. Fretting Fatigue Predictions in a Complex Coupling[J]. International Journal of Fatigue, 2007, 29:1229-1244.
[9]DING J, LEEN S B, WILLIAMS E J, et al. Finite Element Simulation of Fretting Wear Fatigue Interaction in Spline Couplings[J].Tribology, 2008, 2(1):10-24.
[10]MADGE J J, LEEN S B, SHIPWAY P H. The Critical Role of Fretting Wear in the Analysis of Fretting Fatigue[J]. Wear, 2007, 263:542-551.
[11]胡正根, 朱如鹏,靳广虎,等. 齿向分段抛物线修形对渐开线花键副微动磨损参数的影响[J]. 航空动力学报, 2013, 28(7):1644-1649.
HU Zhenggen, ZHU Rupeng, JIN Guanghu, et al. Effect of Axial Piecewise Parabolic Modification on Fretting Wear Parameters of Involute Spline Couplings[J]. Journal of Aerospace Power, 2013,28(7):1644-1649.
[12]胡正根.航空渐开线花键副微动损伤研究[D].南京:南京航空航天大学, 2013.
HU Zhenggen. Research on Fretting Damage of Aviation Involute Spline Couplings[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2013.
[13]JUSTIN P M. Analysis of Axial Load Distribution in a Spline Coupling[D]. Hartford:Rensselaer Polytechnic Institute, 2009.
[14]ROBERT R R. Tooth Engagement Evaluation of Involutes Spline Couplings[D]. Provo:Brigham Young University, 2008.
[15]BARROT A , PAREDES M, SARTOR M. Determining Both Radial Pressure Distribution and Torsional Stiffness of Involute Spline Couplings[J]. Journal of Mechanical Engineering Science, 2006, 220:1727-1738.
[16]CHASE K W, SORENSEN C D, SORENSEN B D. Variation Analysis of Tooth Engagement and Load Sharing in Involute Splines[J]. American Gear Manufacturers Association, 2010, 9(2):54-62.
[17]CHASE K W, SORENSEN C D, BRIAN J K. Variation Analysis of Tooth Engagement and Loads in Involute Splines[J]. Transactions on Automation Science and Engineering, 2010,7(4):746-754.
[18]TJERNBERG A. Load Distribution in the Axial Direction in a Spline Coupling[J]. Engineering Failure Analysis, 2001, 8(6):557-570.
[19]李永康.渐开线斜齿圆柱齿轮齿向修形的研究[D]. 太原:太原理工大学, 2015.
LI Yongkang. Research on Longitudinal Modification of Involute Helical Gear[D].Taiyuan:Taiyuan University of Technology, 2015.
[20]宋乐民.渐开线鼓形齿的鼓形量[J].齿轮,1982(2):63-68.
SONG Lemin. Drum-shaped Quantity of Internal Gear[J]. Gears, 1982(2):63-68.
[21]辛经纬,王生泽.齿轮修形及其实现方法研究[J].机械设计与研究, 2005, 36(5):19-21.
XIN Jingwei, WANG Shengze. Research on the Gear's Modification and Its Processing[J]. Machine Design and Research,2005, 36(5):19-21.
[22]宋乐民.齿形与齿轮强度[M].北京:国防工业出版社, 1987.
SONG Lemin. Tooth Shape and Gear Strength[M]. Beijing:National Defense Industry Press, 1987.
[23]LU Fei, CHEN Guoding, SU Hua. Progressive Wear Prediction of C/C Composite Finger eal Base on ALE Adaptive Meshing Strategy[J]. Proceedings of the Institution of Mechanical Engineers, Part J:Journal of Engineering Triboloy, 2017, 231(5):604-615. |