[1]LIU C, HU S J. An Offset Finite Element Model and Its Applications in Predicting Sheet Metal Assembly Variation[J]. International Journal of Machine Tools & Manufacture, 1995, 35(11):1545-1557.
[2]LIU C, HU S J, WOO T C. Tolerance Analysis for Sheet Metal Assembly [J]. Transactions of the ASME, 1996, 118(1): 62-67.
[3]LIU C, HU S J. Variation Simulation for Deformable Sheet Metal Assemblies Using Finite Element Methods [J]. Journal of Manufacturing Science & Engineering, 1997, 119(3):368-374.
[4]CAI W,HU S J,YUAN J X.Deformable Sheet Metal Fixturing: Principles, Algorithms, and Simulations[J]. Journal of Manufacturing Science and Engineering, 1996, 118(3): 318-324.
[5]DAHLSTRM S, LINDKVIST L. Variation Simulation of Sheet Metal Assemblies Using the Method of Influence Coefficients with Contact Modeling [J]. Journal of Manufacturing Science and Engineering, 2007, 129(3): 615-622.
[6]CAMELIO J, HU S J, CEGLAREK D. Modeling Variation Propagation of Multi-station Assembly Systems with Compliant Parts[J]. Journal of Mechanical Design, 2003, 125(125):673-681.
[7]GERBINO S, PATALANO S, FRANCIOSA P. Statistical Variation Analysis of Multi-station Compliant Assemblies Based on Sensitivity Matrix[C]∥International Conference on Wireless Networks. Las Vegas, Nevada, 2008:597-601.
[8]BIHLMAIER B F. Tolerance Analysis of Flexible Assemblies Using Finite Element and Spectral Analysis[D]. Provo: Brigham Young University, 1999.
[9]TONKS M R, CHASE K W. Covariance Modeling Method for Use in Compliant Assembly Tolerance Analysis[C]∥ ASME 2004 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Salt Lake ,2004:49-55.
[10]TONKS M R, CHASE K W, SMITH C C. Predicting Deformation of Compliant Assemblies Using Covariant Statistical Tolerance Analysis[M]∥ Models for Computer Aided Tolerancing in Design and Manufacturing. Dordrecht: Springer, 2007:321-330.
[11]田兆青, 来新民, 林忠钦. 多工位薄板装配偏差流传递的状态空间模型[J]. 机械工程学报, 2007, 43(2):202-209.
TIAN Zhaoqing, LAI Xinmin, LIN Zhongqin. State Space Model of Variations Stream Propagation in Multi-station Assembly Process of Sheet Metal[J]. Chinese Journal of Mechanical Engineering, 2007, 43(2):202-209 .
[12]文泽军, 刘继军, 赵延明,等. 薄板装配工艺系统可靠性建模与分析[J]. 中国机械工程, 2016, 27(3):376-382.
WEN Zejun, LIU Jijun, ZHAO Yanming, et al. Reliability Modeling and Analysis for Process System of Sheet Metal Assembly[J]. China Mechanical Engineering, 2016, 27(3):376-382.
[13]胡朝辉, 刘建文. 基于PCWR的薄板件装配偏差计算与控制研究[J]. 汽车工程学报, 2017, 7(6):423-431.
HU Zhaohui, LIU Jianwen.Research on Calculation and Control of Flexible Sheet Assembly Deviation Based on PCWR[J]. Chinese Journal of Automotive Engineering, 2017, 7(6) :423-431.
[14]谭昌柏, 袁军, 周来水. 基于宽容分层序列法的飞机装配公差稳健设计技术[J]. 中国机械工程, 2012, 23(24):2962-2967.
TAN Changbai, YUAN Jun, ZHOU Laishui. Robust Tolerancing for Aircraft Assembly Based on Tolerant Lexicographic Method[J]. China Mechanical Engineering, 2012, 23(24):2962-2967.
[15]陈晖, 谭昌柏, 王志国. 耦合几何与材料误差的柔性装配偏差统计分析[J]. 航空学报, 2015, 36(9):3176-3186.
CHEN Hui, TAN Changbai, WANG Zhiguo. Statistical Variation Analysis of Compliant Assembly Coupling Geometrical and Material Error[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(9):3176-3186.
[16]张玮, 王志国, 谭昌柏,等. 基于夹具主动定位补偿的飞机柔性件装配偏差优化方法[J]. 航空学报, 2017, 38(6):258-266.
ZHANG Wei,WANG Zhiguo, TAN Changbai, et al. Assembly Variation Optimization of Aircraft Compliant Parts Based on Active Locating Compensation of Fixture[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(6):258-266.
[17]崔志卓, 杜福洲, 熊涛. 基于有向点集的多面多孔式装配偏差分析与协调[J]. 航空学报, 2018, 39(7):421899.
CUI Zhizhuo, DU Fuzhou, XIONG Tao. Analysis and Coordination of Assembly Deviation of Multi Plane-and-holes Assembly Based on Orientation Points Group[J]. Acta Aeronautica et Astronautica Sinica, 2018, 39(7):421899.
[18]SORKINE O, COHEN-OR D, LIPMAN Y, et al. Laplacian Surface Editing[C]∥Euro Graphics/ACM SIGGRAPH Symposium on Geometry Processing. Nice, ACM, 2004:175-184. |