[1]SANTIAGO-PROWALD J,BAIER H.Advances in Deployable Structures and Surfaces for Large Apertures in Space[J].CEAS Space Journal,2013,5(3/4): 89-115.
[2]XU Y D,CHEN L L,LIU W L,et al.Type Synthesis of the Deployable Mechanisms for the Truss Antenna Using the Method of Adding Constraint Chains[J].Journal of Mechanisms and Robotics,2018,10(4): 041002.
[3]XU Y,GUAN F L.Structure-electronic Synthesis Design of Deployable Truss Antenna[J].Aerospace Science and Technology,2013,26(1): 259-267.
[4]韩博,许允斗,姚建涛,等.剪叉联动式双层环形桁架可展开天线机构设计与分析[J].载人航天,2017,23(3): 306-310.
HAN Bo,XU Yundou,YAO Jiantao,et al.Design and Analysis of Scissors Linkage Double Ring Truss Deployable Antenna Mechanism[J].Manned Spaceflight,2017,23(3): 306-310.
[5]DAI L,GUAN F L,GUEST J K.Structural Optimization and Model Fabrication of a Double-ring Deployable Antenna Truss[J].Acta Astronautica,2014,94: 843-851.
[6]王娟,刘明治,杨要恩.基于改进变异蚁群算法神经网络的空间大型可展天线动态响应辨识[J].中国机械工程,2009,20(1): 86-89.
WANG Juan,LIU Mingzhi,YANG Yaoen.Identification of Large-space Deployable Antenna Dynamic Response Based on Improved Mutated Ant Colony Algorithm[J].China Mechanical Engineering,2009,20(1): 86-89.
[7]胡飞,宋燕平,郑士昆,等.空间构架式可展天线研究进展与展望[J].宇航学报,2018,39(2): 111-120.
HU Fei,SONG Yanping,ZHENG Shikun,et al.Advancesand Trends in Space Truss Deployable Antenna[J].Journal of Astronautics,2018,39(2): 111-120.
[8]郑士昆,冀有志,崔兆云,等.环境一号C 星SAR 天线设计与分析[J].雷达学报,2014,3(3):266-273.
ZHENG Shikun,JI Youzhi,CUI Zhaoyun,et al.Design and Analysis of HJ-1-C Satellite SAR Antenna[J].Journal of Radars,2014,3(3): 266-273.
[9]黄志荣,郑士昆,朱佳龙,等.环境一号C星构架反射器展开驱动部件优化设计[J].雷达学报,2014,3(3): 282-287.
HUANG Zhirong,ZHENG Shikun,ZHU Jialong,et al. Design Optimization of Expansion Driven Components for the HJ-1-C Satellite[J].Journal of Radars,2014,3(3): 282-287.
[10]LI T J.Deployment Analysis and Control of Deployable Space Antenna[J].Aerospace Science and Technology,2012,18(1): 42-47.
[11]尤国强,杨东武.索网结构展开和调控性能的多目标形状优化[J].中国机械工程,2009,20(9): 1053-1056.
YOU Guoqiang,YANG Dongwu.Multi-objective Optimization on Shape for a Cable-net Structure with Goals of Deployment and Adjustment Ability[J].China Mechanical Engineering,2009,20(9): 1053-1056.
[12]AGRAWAL P,ANDERSON M,CARD M.Preliminary Design of Large Reflectors with Flat Racets[J].IEEE Transactions on Antennas and Propagation,1981,29(4): 688-694.
[13]张京街,关富玲,胡其彪.大型切割旋转抛物面展开结构的设计[J].工程设计学报,2000,7(1): 46-48.
ZHANG Jingjie,GUAN Fuling,HU Qibiao.Design of Large Cutting-palabolic Deployable Structure[J].Journal of Engineering Design,2000,7(1):46-48.
[14]李团结,周懋花,段宝岩.可展天线的柔性索网结构找形分析方法[J].宇航学报,2008,29(3): 794-798.
LI Tuanjie,ZHOU Maohua,DUAN Baoyan.A Method of Form-finding Analysis for Flexible Cable Net Structures of Deployable Antennas[J].Journal of Astronautics,2008,29(3): 794-798.
[15]YANG D W,ZHANG S X,LI T J,et al.Preliminary Design of Paraboloidal Reflectors with Flat Facets[J].Acta Astronautica,2013,89: 14-20.
[16]DENG H Q,LI T J,WANG Z W.Design of Geodesic Cable Net for Space Deployable Mesh Reflectors[J].Acta Astronautica,2016,119: 13-21.
[17]田大可,刘荣强,邓宗全,等.构架式可展天线工作表面母线拟合方法[J].哈尔滨工程大学学报,2010,31(9): 1240-1247.
TIAN Dake,LIU Rongqiang,DENG Zongquan,et al.Fitting Method of Working Surface Generatrix for Deployable Truss Antennas[J].Journal of Harbin Engineering University,2010,31(9): 1240-1247.
[18]陈雨,毛恩荣,吕黄珍,等.基于推理的大型收获机械变速箱参数化设计[J].农业机械学报,2013,44(增刊2): 278-282.
CHEN Yu,MAO Enrong,LYU Huangzhen,et al.Parametric Design of Large Harvesting Machinery Transmission Gearbox Based on Reasoning[J].Transactions of the Chinese Society for Agricultural Machinery,2013,44(S2): 278-282.
[19]郭旭伟,王知行,钟诗胜,等.虚拟环境下并联机床的参数化建模与干涉校验[J].计算机集成制造系统,2003,9(6): 465-469.
GUO Xuwei,WANG Zhixing,ZHONG Shisheng,et al.Parameterized Modeling and Interfere Calibration of Parallel Machine Tool in Virtual Environment[J].Computer Integrated Manufacturing Systems,2003,9(6): 465-469.
[20]俞高红,张玮炜,孙良,等.偏心齿轮-非圆齿轮后插旋转式分插机构的三维参数化设计[J].农业工程学报,2011,27(11): 9-14.
YU Gaohong,ZHANG Weiwei,SUN Liang,et al.Three-dimensional Parametric Design of Backward Rotary Transplanting Mechanism with Eccentric Gears and Non-circular Gear[J].Transactions of the Chinese Society of Agricultural Engineering,2011,27(11): 9-14.
[21]赵振宙,严畅,王同光,等.考虑叶片相互影响风力机涡流发生器参数化建模[J].机械工程学报,2018,54(2): 201-208.
ZHAO Zhenzhou,YAN Chang,WANG Tongguang,et al.Parametric Model of Vortex Generators of Wind Turbine Considering Inter-effect of Winglets[J].Journal of Mechanical Engineering,2018,54(2): 201-208.
[22]刘博林,谢里阳,张娜,等.基于Isight的冲压驱动桥壳参数化有限元建模方法[J].东北大学学报(自然科学版),2018,39(3): 373-377.
LIU Bolin,XIE Liyang,ZHANG Na,et al.Finite Element Modeling of Punching Drive Axle Housing Parameterization Based on Isight[J].Journal of Northeastern University (Natural Science),2018,39(3): 373-377.
[23]葛晓波,邵晓东,仇原鹰,等.一种基于框架模型的产品整机建模规则描述语义[J].计算机集成制造系统,2016,22(1): 232-240.
GE Xiaobo,SHAO Xiaodong,QIU Yuanying,et al.Descriptive Semantics of Whole Product Modeling Rules Based on Frame Model[J].Computer Integrated Manufacturing Systems,2016,22(1): 232-240.
[24]关富玲,侯国勇,赵孟良.构架式可展天线结构设计的程序实现[J].工程设计学报,2006,13(2): 108-113.
GUAN Fuling,HOU Guoyong,ZHAO Mengliang.Program Implementation of Structure Design for Deployable Truss Antenna[J].Journal of Engineering Design,2006,13(2): 108-113.
[25]夏鸿建,王波兴,陈立平.多体系统仿真分析平台参数化建模技术研究[J].计算机集成制造系统,2007,13(8):1511-1518.
XIA Hongjian,WANG Boxing,CHEN Liping.Parametric Modeling Technique for Multi-body System Simulation Platform[J].Computer Integrated Manufacturing Systems,2007,13(8): 1511-1518. |