基于活动拉深筋过拉深工艺的高强钢S梁扭曲回弹控制研究

中国机械工程

基于活动拉深筋过拉深工艺的高强钢S梁扭曲回弹控制研究

王成勇;姚圆圆;程明;安自仁

合肥工业大学材料科学与工程学院，合肥，230009

出版日期:2018-12-06 发布日期:2018-12-06
基金资助:
国家自然科学基金资助项目（51275146）
National Natural Science Foundation of China （No. 51275146）

Research on Twist Springback Controls of High Strength Steel Used in S-shaped Beams Based on Movable Drawbeads Overstretching Processes

WANG Chengyong;YAO Yuanyuan;CHENG Ming;AN Ziren

School of Materials Science and Engineering,Hefei University of Technology,Hefei,230009

Online:2018-12-06 Published:2018-12-06
Supported by:
National Natural Science Foundation of China （No. 51275146）

摘要/Abstract

摘要： 采用CAE分析与现场调试相结合的方法，研究了高强钢变截面S梁拉延后的扭曲回弹规律，发现拐角特征是S梁发生扭曲回弹的关键影响因素。通过对拐角截面的应力和变形分析，解释了拐角造成扭曲回弹的原因，并设计了成形筋，以控制拐角造型引起的扭曲回弹。在设计成形筋的基础上，比较了变压边力和活动拉深筋过拉深两种工艺方案对S梁扭曲回弹的改善效果。研究结果表明活动拉深筋过拉深工艺对S梁扭曲回弹的改善更有效。

关键词: 扭曲回弹, 高强钢, 变压边力, 活动拉深筋过拉深

Abstract: The twist springback characteristics of high strength steel S-shaped beams with variable cross-section in stamping processes were analyzed by numerical simulations and physical tests. The results indicate that the corners play an important role in twist springback. To explore the causes of the twist springback, the stress distribution and deformation of corner sections were analyzed. The forming bead was designed to balance the nonlinearity of the corners. Based on the forming bead design, the improvement effects of the two processes of variable binder force and movable drawbeads overstretching on the S-beam torsional springback were compared. The results verify that movable drawbeads are more efficient to suppress the S-beam twist springback.

Key words: twist springback, high strength steel, varied binder force, movable drawbeads overstretching

中图分类号:

TG386.3

王成勇;姚圆圆;程明;安自仁. 基于活动拉深筋过拉深工艺的高强钢S梁扭曲回弹控制研究[J]. 中国机械工程.

WANG Chengyong;YAO Yuanyuan;CHENG Ming;AN Ziren. Research on Twist Springback Controls of High Strength Steel Used in S-shaped Beams Based on Movable Drawbeads Overstretching Processes[J]. China Mechanical Engineering.

参考文献

[1]徐正兴, 路平, 江开勇. 高强度钢冲压成形中扭曲回弹仿真与工艺参数优化[J]. 机械设计与制造, 2012, 10(10):262-264.
XU Zhengxing, LU Ping,JIANG Kaiyong. Torsion Springback Simulation and Optimization of Process Parameters of High Strength Steel in the Stamping Forming[J]. Machinery Design ＆ Manufacture, 2012,10(10):262-264.
[2]单体坤, 李淑惠, 陈关龙. 变压边力下高强度钢板的回弹研究[J]. 塑性工程学报, 2005, 12(6):56-58.
SHAN Tikun, LI Shuhui, CHEN Guanlong. Research on Springback of High Strength Sheet Metal in Variable Blank Holder Forces[J]. Journal of Plasticity Engineering, 2005, 12(6):56-58.
[3]张懃. 双向钢的活动筋过拉伸工艺及模具设计[J]. 模具制造, 2013, 13(11):23-26.
ZHANG Qin. Overdrawing Process and Die Design with Active Drawing-beads for the DP Steel[J]. Die & Mould Manufacture, 2013, 13(11):23-26.
[4]吴磊, 蒋浩民, 汪晨,等. 高强钢材料性能对车身零件冲压回弹的影响[J]. 中国机械工程, 2009,20(11):1369-1371.
WU Lei, JIANG Haomin, WANG Chen, et al. Effect of Material Properties on Springback of High Strength Steel Parts [J]. China Mechanical Engineering, 2009,20(11):1369-1371.
[5]DU C, CHEN X M, LIM T, et al. Correlation of FEA Prediction and Experiments on Dual-phase Steel Automotive Rails[J]. Materials Processing and Design, 2007, 908(1):943-948.
[6]郭超群, 陈军, 陈劼实,等. 超高强度钢薄板扭曲回弹特性的数值模拟与试验分析[J]. 上海交通大学学报, 2010, 44(4):468-472.
GUO Chaoqun, CHEN Jun, CHEN Jieshi, et al. Numerical Simulation and Experimental Validation of Distortional Springback of Advanced High-strength Steel Sheet Metal Forming[J]. Journal of Shanghai Jiaotong University, 2010, 44(4):468-472.
[7]XUE X, LIAO J, VINCZE G, et al. Twist Springback Characteristics of Dual-phase Steel Sheet after Non-axisymmetric Deep Drawing[J]. International Journal of Material Forming, 2017,10(2):267-278.
[8]谭晶, 孙胜, 赵振铎,等. 拉深工艺变压边力控制数值模拟研究[J]. 中国机械工程, 2003, 14(4):287-289.
TAN Jing, SUN Sheng, ZHAO Zhenduo, et al. Finite Element Simulation of Variable Blank Holding Force Control in Deep Drawing Process[J]. China Mechanical Engineering, 2003, 14(4):287-289.
[9]吴锦, 徐志刚. 汽车新材料带来新挑战——超高强度钢冲压工艺及仿真技术的应用[J]. 汽车工艺师, 2007(1):102-105.
WU Jin, XU Zhigang. New Auto Materials Bring New Challenges—The Application of High Strength Steel Stamping Process and Simulation Technology[J]. Auto Manufacture Engineer, 2007(1):102-105.

[1]	胡健1;陈泽中1;刘涛2;杨金华3. 车门防撞梁热成形工艺优化仿真与试验[J]. 中国机械工程, 2021, 32(01): 92-100.
[2]	刘黎明;陈亮;宋刚. 高强钢低功率脉冲激光诱导熔化极活性气体保护电弧仰焊成形[J]. 中国机械工程, 2020, 31(17): 2137-2141.
[3]	聂昕1;肖兵兵1;申丹凤2;郭文峰1. 考虑变形热和摩擦热效应的热力耦合冲压研究[J]. 中国机械工程, 2020, 31(16): 2005-2015.
[4]	许冰1;欧航1;柳泉潇潇1;徐志丹3;李光耀1，2;崔俊佳1，2. 5052铝合金-HC420LA高强钢磁脉冲焊接接头盐雾腐蚀性能[J]. 中国机械工程, 2019, 30(12): 1506-1511.
[5]	聂昕;谭广;乔晓勇. 基于热-力耦合和变摩擦因数的高强钢冷冲压成形性[J]. 中国机械工程, 2018, 29(16): 1996-2002.
[6]	王晓光1;宇慧平2;李晓阳2;陈树君2. 22MnB5钢焊点的力学试验[J]. 中国机械工程, 2017, 28(19): 2383-2387.
[7]	薛克敏, 孙大智, 李萍, 巩子天纵. 22MnB5超高强钢热冲压成形工艺及试验[J]. 中国机械工程, 2017, 28(12): 1498-1503,1511.
[8]	崔俊佳, 胡明, 李光耀, . 汽车零部件热成形极限裕度云图的构建与应用[J]. 中国机械工程, 2017, 28(03): 358-365.
[9]	王敏, 张春, 张宇, 李少兵, 王琼霜. 汽车高强钢纵梁热冲压实验研究[J]. 中国机械工程, 2016, 27(03): 391-397.
[10]	雷雨1;孟正华1,2;胡建华1;冯飞1;黄尚宇1. 两种典型车用高强钢板高速率成形试验研究[J]. 中国机械工程, 2013, 24(18): 2529-2533.
[11]	刘桂萍, 韩旭, 姜潮. 基于微型多目标遗传算法的薄板冲压成形变压边力优化[J]. 中国机械工程, 2007, 18(21): 2614-2617.