[1]FISHER W P, DAY A J. A Study of the Factors Controlling the Tube-sinking Process for Polymer Materials[J]. Journal of Materials Processing Technology, 2003, 68: 156-162.
[2]SADOK L, KUSIAK J, PACKO M. State of Strain in the Tube Sinking Process[J]. Journal of Materials Processing Technology, 2001, 60:161-166.
[3]滕宏春, 林桂霞, 胡平. 带有动芯轴的管料壁厚减薄缩口成形的理论解析[J]. 机械工程学报, 2005, 41(7): 234-238.
TENG Hongchun, LIN Guixia, HU Ping. Theoretical Analysis and Experiment of Sinking of Tube with a Moving Mandrel[J].Journal of Mechanical Engineering, 2005, 41(7): 234-238.
[4]彭俊阳, 付渊, 陈景松, 等. 缩径过程中的壁厚变化实验[J]. 塑性工程学报,2012, 19(3): 60-63.
PENG Junyang, FU Yuan, CHEN Jingsong, et al. Experimental Investigation on Thickness Changes during Necking Process[J]. Journal of Plasticity Engineering. 2012, 19(3): 60-63.
[5]王连东, 赵石岩, 高鹏飞, 等. 管坯推压缩径端部翘曲机理及其影响因素分析[J]. 塑性工程学报, 2005, 12(3): 76-79.
WANG Liandong, ZHAO Shiyan, GAO Pengfei, et al. Analysis of Buckling in Push-sinking and lts lnfluence Factor[J]. Journal of Plasticity Engineering, 2005, 12(3): 76-79.
[6]陈国强.小型汽车桥壳半滑动式液压胀形工艺研究[D]. 秦皇岛:燕山大学,2014.
CHEN Guoqiang. Study on Half-sliding Hydroforming of Automobile Axle Housings[D]. Qinhuangdao: Yanshan University, 2014.
[7]TENG Hongchun, TENG Bingyan. An Optiming Process Design for Sinking with the Thin-wall Cylindrical Cup[J]. Applied Mechanics and Materials,2014,456:22-27.
[8]CHITKALA N R. Axi-sysmmetric Tube Extrusion/Piercing Using Die-mandrel Combination: Some Experiments and a Generalized Upper Bound Analysis[J]. International Journal of Mechanical Sciences, 2001, 43: 1685-1709.
[9]王连东,梁晨,马雷,等. 管坯双侧反向芯轴推压缩径模具及工艺:中国,201310191757.9[P]. 2015-05-13.
WANG Liandong, Liang Chen, Ma Lei, et al. The Bilateral Reverse Mandrel Reduction Die and Technology of Tube: China, 201310191757.9[P]. 2015-05-13. |