纹理表面滑动摩擦稳态摩擦学性能

中国机械工程

纹理表面滑动摩擦稳态摩擦学性能

李万钟1，2;徐颖强1;孙戬1;刘楷安1;吴正海1

1.西北工业大学机电学院，西安，710072
2.西安石油大学机械工程学院，西安，710065

出版日期:2018-05-25 发布日期:2018-05-25
基金资助:
国家自然科学基金资助项目（51675427）；
西北工业大学博士论文创新基金资助项目（CX201420）
National Natural Science Foundation of China（No. 51675427）

Steady-state Tribological Performance of Sliding Friction on Textured Surface

LI Wanzhong1，2;XU Yingqiang1;SUN Jian1;LIU Kai'an1;WU Zhenghai1

1.School of Mechanical Engineering， Northwestern Polytechnical University，Xi'an，710072
2.Mechanical Engineering College，Xi'an Shiyou University，Xi'an，710065

Online:2018-05-25 Published:2018-05-25
Supported by:
National Natural Science Foundation of China（No. 51675427）

摘要/Abstract

摘要： 基于稳态滑动摩擦系统模型，采用球-盘摩擦副定量分析研究法向载荷、滑动速度、初始表面纹理和摩擦副材料对稳态摩擦因数的影响，得到稳态摩擦因数在不同工况下的变化规律。结果表明：滑动摩擦的稳态摩擦因数与磨损率正相关，周向纹理表面的稳态摩擦因数最大，无纹理表面的稳态摩擦因数次之，径向纹理表面的稳态摩擦因数最小；无论何种初始表面形貌，随着转速的增加，稳态摩擦因数先减小后增大，随着法向载荷的增大，稳态摩擦因数呈增长趋势；较深较宽的表面纹理具有更大的稳态摩擦因数和更大的瞬时波动；稳态摩擦因数也与摩擦副材料的选取有关。

关键词: 纹理表面, 滑动摩擦, 稳态摩擦因数, 球盘摩擦副

Abstract: Based on steady-state sliding frictional model，the influences of normal loading，sliding speed， initial surface texture and material on steady-state frictional coefficient were researched quantitatively with ball-disk friction pair.Rules of steady-state frictional coefficients under different operating condition were obtained.The results show that steady-state frictional coefficients of sliding friction are positively correlated with wear rates.Steady-state frictional coefficients of different surfaces in morphology descending order are circumferential texture， untextured and radial textures.Regardless of the initial surface， frictional coefficient decreases first and then increases with the increase of revolving speed.With the increase of normal loading， it presents an upward trend.Deeper or wider textured surfaces have higher frictional coefficients and larger instantaneous fluctuation.Moreover， frictional coefficients also associate with the selection of friction pair materials.

Key words: textured surface, sliding friction, steady-state frictional coefficient, ball-disc friction pair

中图分类号:

TH117.1

李万钟1，2;徐颖强1;孙戬1;刘楷安1;吴正海1. 纹理表面滑动摩擦稳态摩擦学性能[J]. 中国机械工程.

LI Wanzhong1，2;XU Yingqiang1;SUN Jian1;LIU Kai'an1;WU Zhenghai1. Steady-state Tribological Performance of Sliding Friction on Textured Surface[J]. China Mechanical Engineering.

参考文献

[1]BOWDEN F P， TABOR D.The Friction and Lubrication of Solids[M].London：Oxford University Press， 1954.
[2]BHUSHAN B.Introduction to tribology[M].New York：John Wiley，2002.
[3]温诗铸，黄平.摩擦学原理[M].3版.北京：清华大学出版社，2008.
WEN Shizhu，HUANG Ping.Principles of Tribology[M].3rd ed.Beijing：Tsinghua University Press，2008.
[4]ACHANTA S，CELIS J P.On the Scale Dependence of Coefficient of Friction in Unlubricated Sliding Contacts[J].Wear，2010，269（5/6）：435-442.
[5]IBATAN T，UDDIN M S，CHOWDHURY M A K.Recent Development on Surface Texturing in Enhancing Tribological Performance of Bearing Sliders[J].Surface & Coatings Technology，2015，272：102-120.
[6]PETTERSSON U，JACOBSON S.Friction and Wear Properties of Micro Textured DLC Coated Surfaces in Boundary Lubricated Sliding[J].Tribology Letters， 2004，17（3）：553-559.
[7]HE B，CHEN W，WANG Q J.Surface Texture Effect on Friction of a Microtextured Poly （Dimethylsioxane）（PDMS）[J].Tribology Letter，2008，31（3）：187-197.
[8]KUSTANDI T S，CHOO J H，LOW H Y，et al.Texturing of UHMWPE Surface via NIL for Low Friction and Wear Properties[J].Journal of Physics D：Applied Physics，2010，43（1）：015301.
[9]KARUPANNASAMY D K，ROOIJ M B，SCHIPPER D J.Multi-scale Friction Modelling for Rough Contacts under Sliding Conditions[J].Wear，2013，308（1/2）： 222-231.
[10]LORENZO-MARTIN C，AJAYI O O.Effect of SiC Particle Impact Nano-texturing on Tribological Performance of 304L Stainless Steel[J].Applied Surface Science，2014，315（315）：287-291.
[11]SHEN X H，TAO G C.Tribological Behaviors of Two Micro Textured Surfaces Generated by Vibrating Milling under Boundary Lubricated Sliding[J].International Journal of Advanced Manufacturing Technology，2015，79（9）：1995-2002.
[12]FEYZULLAHOGLU E，SAFFAK Z.The Tribological Behaviour of Different Engineering Plastics under Dry Friction Conditions[J].Materials and Design， 2007，29（1）：205-211.
[13]RECH J，CLAUDIN C，ERAMO E.Identification of a Friction Model—Application to the Context of Dry Cutting of an AISI 1045 Annealed Steel with a TiN-coated Carbide Tool[J].Tribology International，2009，42（5）：738-744.
[14]SPIJKER P，ANCIAUX G，MOLINARI J F.Relations between Roughness，Temperature and Dry Sliding Friction at the Atomic Scale[J].Tribology International，2013，59：222-229.
[15]STEMBALSKI M，PRES P，SKOCZYNSKI W.Determination of the Friction Coefficient as a Function of Sliding Speed and Normal Pressure for Steel C45 and Steel 40HM[J].Archives of Civil and Mechanical Engineering，2013，13（4）：444-448.
[16]Abaqus 6.9 Software Documentation.
[17]ABBOTT E J，FIRESTONE F A.Specifying Surface Quality[J].Mechanical Engineering，1933，55（9）： 569-572.
[18]BLAU P J.On the Nature of Running-in[J].Tribology International，2006，38（11/12）：1007-1012.
[19]BLAU P J.Interpretations of the Friction and Wear Break-in Behavior of Metals in Sliding Contact[J].Wear，1981，71（1）： 29-43.
[20]葛世荣，朱华.摩擦学的分形[M].北京：机械工业出版社，2005：226-271.
GE Shirong， ZHU Hua.Fractal in Tribology[M].Beijing： China Machine Press，2005：226-271.
[21]华子恺.人工关节润滑技术与摩擦学测试研究[D].上海：上海大学，2011.
HUA Zikai.Research on Artificial Joint Lubrication and Tribological Test Technology[D].Shanghai： Shanghai University，2011.
[22]BADISCH E，FONTALVO G A，STOIBER M，et al.Tribological Behavior of PACVD TiN Coatings in the Temperature Range Up to 500℃[J].Surface & Coatings Technology，2003，s163/164（2）：585-590.
[23]PEI Y T，HUIZENGA P，GALVAN D，et al.Breakdown of the Coulomb Friction Law in Tic/a-C∶H Nanocomposite Coatings[J].Journal of Applied Physics，2006，100（100）：114309-114309-9.
[24]徐颖强，李娜娜，李万钟，等.硬态切削工件表面白层厚度预测方法[J].机械工程学报，2015，51（3）： 182-189.
XU Yingqiang，LI Nana，LI Wanzhong，et al.Prediction Method of the White Layer Thickness in Hard Cutting[J].Journal of Mechanical Engineering，2015，51（3）：182-189.
[25]HAO L，MENG Y，CHEN C.Experimental Investigation on Effects of Surface Texturing on Lubrication of Initial Line Contacts[J].Lubrication Science，2014， 26（5）：363-373.
[26]李万钟，徐颖强，孙戬，等.滑动摩擦结合面磨合磨损表征方法与影响因素[J].中国表面工程， 2017， 30（1）：125-131.
LI Wanzhong，XU Yingqiang，SUN Jian，et al.Characterization Methods and Influence Factors of Running-in Wear between Sliding Joint Surfaces[J].China Surface Engineering，2017，30（1）：125-131.