[1]江国宪,朱本富. 用等效机械手工作空间的方法分析平面四杆机构的可动性[J].吉林工业大学学报,1990, 20(2):67-75.
JIANG Guoxian, ZHU Benfu. Analysis of t-he Movability of Planar Four-bar Mechanismby Equivalent Manipulator Working Space[J].Journal of Jilin University of Technology,1990, 20(2):67-75.
[2]宋杰,梅瑛,李瑞琴. 平面3-DOF PRR-RRP型六杆机构的曲柄存在条件[J].机械传动,2013,37(11):32-34.
SONG Jie, MEI Ying, LI Ruiqin. Crank Existence Condition of Planar 3-DOF PRR-RRP Type Six-bar Mechanism[J]. Journal of Mechanical Transmission,2013,37(11):32-34,170.
[3]于红英,唐德威. 平面铰链五杆机构的奇异性研究[J].哈尔滨工业大学学报, 2007,39(3):381-385.
YU Hongying, TANG Dewei. Study on the Singularity of a Planar Five-bar Mechanism [J]. Journal of Harbin Institute of Technology,2007,39(3):381-385.
[4]王文格, 张文彬. 双伺服驱动七杆机构研究[J]. 机械传动, 2014,38(11):10-13.
WANG Wenge, ZHANG Wenbin. Research of a Seven-bar Mechanism with Double Servo Drive[J]. Journal of Mechanical Transmission,2014,38(11):10-13.
[5]沈惠平,杨廷力. 三个复杂基本运动链奇异性条件的求解与识别[J]. 机械科学与技术,2000,19(5):750-752.
SHEN Huiping, YANG Tingli. Solutions for Singularity Conditions for Three Complex Basic Kinematic Chain[J]. Mechanical Scienceand Technology,2000,19(5):750-752.
[6]GOSSELIN C, ANGELES J. Singularity Analysis of Closed-loop Kinematic Chains [J]. IEEE Transactions on Robotics & Automation,1990,6(3):281-290.
[7]WANG J, TING K L, XUE C. Discriminant Method for the Mobility Identification of Single Degree-of-freedom Double-loop Linkages[J]. Mechanism & Machine Theory,2010,45(5):740-755.
[8]GAO F, ZHANG X Q, ZHAO Y S, et al. Distribution of Some Properties Physical Model of the Solution Space of 2-DOF Parallel Planar Manipulators [J]. Mechanism & Machine Theory,1995,30(6):811-817.
[9]MERLET J P.Singular Configurations of Parallel Manipulators and Grassman Geometry[J]. International Journal of Robotics Research,1989,8(5):45-56.
[10]COLLINS C L, MCCARTHY J M. The Quartic Singularity Surfaces of Planar Platformsin the Clifford Algebra of the Projective Plane[J]. Mechanism & Machine Theory,1998,33(7):931-944.
[11]WANG J, NIE L Y, WANG Q, et al. Singularity Analysis of Planar Multiple-DOF Linkages[C]// ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Buffalo, NY,2014:V05AT08A051.
[12]TING K L, WANG J, XUE C, et al. Full Rotatability and Singularity of Six-bar and Geared Five-bar Linkages[J]. Journal of Mechanisms & Robotics,2010,2(1):298-320.
[13]HAIN K. Applied Kinematics[M]. 2nd ed., New York: McGraw-Hill,1967.
[14]DIJKSMAN E A. Why Joint-joining is Applied on Complex Linkages[C]// Second IFToMM International Symposium on Linkages and Computer Aided Design Methods, SYROM'77.Bucharest, Romania,1977:185-212.
[15]PENNOCK G R, KINZEL E C. Path Curvature of the Single Flier Eight-bar Linkage[J].Journal of Mechanical Design,2004,126(3):217-226. |