基于工艺演化的工艺信息一体化建模

摘要/Abstract

摘要： 针对工艺演化过程中工艺信息的动态性、多样性及关联性，以工艺过程为载体，构建了工艺信息的一体化表达模型。首先建立了一种喷泉式的工艺演化模型，从宏观上论述了工艺演化模式及演化关系。通过演化过程信息形态及关联分析，提出一种基于工艺过程的建模方法。该方法采用“标签-对象”的映射方式，将资源、经验知识、管理信息“标注”在工艺过程上面，建立了各类信息与工艺过程的可扩展性关联。最后以实例说明了所提出方法在信息建模及原型系统开发中的应用。

关键词: 工艺演化模式, 工艺信息, 一体化建模, 工艺过程, 标签, 对象

Abstract: Process informations used and produced during the process evolution were dynamic, diversified and interrelated. An integrated model of process information was constructed by taking the process as a carrier. Firstly, a fountain-type model of the process evolution was designed to discuss different evolutionary modes of the process and their evolutionary relationships on macro-level. A process-based modeling method was presented by analyzing the forms and relevance of process evolutionary informations. In this method, resources, experiential knowledges and management informations were marked on the process planning using a “Tag-Object” mapping mode, in order to build the extensible associations between the process and other kinds of information. Finally, a process information example was given to illustrate the applications of the proposed method in information modeling and prototype system development.

Key words: process evolutionary mode, process information, integrated modeling, process planning, tag, object

中图分类号:

TH164
TH166

王庆文;秦世超;李静. 基于工艺演化的工艺信息一体化建模[J]. 中国机械工程.

WANG Qingwen;QIN Shichao;LI Jing. Process-based Evolution Process Information Integrated Modeling[J]. China Mechanical Engineering.

参考文献

[1]田富君，田锡天，耿俊浩，等.基于模型定义的工艺信息建模及应用[J].计算机集成制造系统，2012, 18(5)：913-919.
TIAN Fujun, TIAN Xitian, GENG Junhao, et al. Model-based Definition Process Information Modeling and Application[J]. Computer Integrated Manufacturing Systems, 2012, 18(5): 913-919.
[2]宋士刚,徐立云,李爱平. 面向可重组制造系统的工艺过程描述方法[J]. 中国机械工程,2009,20(15):1807-1812.
SONG Shigang, XU Liyun, LI Aiping. Design Method of Process for Reorganizable Manufacturing System[J]. China Mechanical Engineering, 2009, 20(15): 1807-1812.
[3]黄华,李爱平. 基于STEP-NC的非线性加工工艺规划研究[J]. 中国机械工程, 2009, 20(2):171-175.
HUANG Hua, LI Aiping. Study on Nonlinear Machining Process Planning Based on STEP-NC[J]. China Mechanical Engineering, 2009, 20(2): 171-175.
[4]QIAO L, KAO S, ZHANG Y. Manufacturing Process Modelling Using Process Specification Language[J]. International Journal of Computer Integrated Manufacturing, 2011, 55: 549-563.
[5]EUM K, KANG M, KIM G, et al. Ontology-based Modeling of Process Selection Knowledge for Machining Feature[J]. International Journal of Precision Engineering and Manufacturing, 2013, 14(10):1719-1726.
[6]窦光继，莫蓉，万能. 三维CAPP工艺信息表达与集成技术研究[J]. 航空制造技术,2012(7): 92-95.
DOU Guangji, MO Rong, WAN Neng. Expression and Integration Technology of Three-dimensional CAPP Process Information[J]. Aeronautical Manufacturing Technology, 2012(7): 92-95.
[7]韦韫,李东波,童一飞. 面向服务的基于元模型的统一制造资源建模研究[J]. 中国机械工程, 2012, 23(15): 1818-1824.
WEI Yun, LI Dongbo, TONG Yifei. Study on Service-oriented Modeling of Unified Manufacturing Resources Based on Meta-model[J]. China Mechanical Engineering, 2012, 23(15): 1818-1824.
[8]王念东，刘毅，李文正，等.面向装配工序交叉的虚拟装配工艺信息模型[J]. 计算机辅助设计与图形学学报, 2009，21(9): 1352-1358.
WANG Niandong, LIU Yi, LI Wenzheng, et al. A Virtual Assembly Process Information Model for Crossing Assembly Operations[J]. Journal of Computer-aided Design & Computer Graphics, 2009, 21(9): 1352-1358.
[9]靳江艳,黄翔,刘希平,等. 基于模型定义的飞机装配工艺信息建模[J]. 中国机械工程, 2014, 25(5): 569-576.
JIN Jiangyan, HUANG Xiang, LIU Xiping, et al. Optimization of Aircraft Assembly Technology Information Based on Model Definition[J]. China Mechanical Engineering, 2014, 25(5): 569-576.
[10]ALEMANNI M, DESTEFANIS F, VEZZETTI E. Model-based Definition Design in the Product Lifecycle Management Scenario[J]. The International Journal of Advanced Manufacturing Technology, 2011, 52(1/4):1-14.

[1]	贾浩1;陈智军1;徐海林2;李亚飞1. 大容量远距离声表面波标签研究[J]. 中国机械工程, 2019, 30(16): 2003-2009.
[2]	王闯, 江平宇, 杨小宝. [数据建模]智能车间RFID标签有效识别及制造信息自动关联[J]. 中国机械工程, 2019, 30(02): 149-158.
[3]	卢志远, 马鹏飞, 肖江林, 王美清, 唐晓青. [设备健康管理]基于机床信息的加工过程刀具磨损状态在线监测[J]. 中国机械工程, 2019, 30(02): 220-225.
[4]	白亚莉1;张毅1;冀敏2;刘文强3. 基于多分布响应面算法的火炮方向机齿轮传动误差可靠性分析[J]. 中国机械工程, 2017, 28(13): 1593-1600.
[5]	朱绍维, 牟文平, 汤立民, 杜丽. 融合工艺信息的复杂零件加工状态识别方法[J]. 中国机械工程, 2016, 27(11): 1479-1483.
[6]	陈建魁, 郭熙乾, 尹周平, 黄永安. 一种适于柔性RFID标签生产的微胶滴检测算法[J]. 中国机械工程, 2015, 26(6): 789-793.
[7]	靳江艳1;黄翔1;刘希平2;李泷杲1. 基于模型定义的飞机装配工艺信息建模[J]. 中国机械工程, 2014, 25(5): 569-576.
[8]	黄鑫1;陈智军1;陈涛1;阮鹏1;徐海林2. 声表面波标签的仿真与实验研究[J]. 中国机械工程, 2014, 25(5): 651-656.
[9]	常勇;林荣富;李延平. 做平面运动滚子从动件盘形凸轮机构的深度广义第Ⅱ类综合问题[J]. 中国机械工程, 2014, 25(16): 2149-2158.
[10]	朱华炳, 罗祖平, 董伯麟, 王治森. 面向活动对象的可重构数控系统软件设计[J]. 中国机械工程, 2013, 24(6): 781-786.
[11]	许静1, 2, 纪杨建2, 祁国宁2, 宋利伟2, 刘曦泽2. 基于模块化产品平台的技术对象重用建模技术研究[J]. 中国机械工程, 2012, 23(14): 1681-1687,1692.
[12]	郭银章, 曾建潮. 基于决策规则对象Petri网的机械产品协同设计过程动态建模 [J]. 中国机械工程, 2011, 22(14): 1708-1714.
[13]	段桂江, 熊耀华. 面向复杂产品多级研制体系的协同质量计划管理系统研究 [J]. 中国机械工程, 2010, 21(17): 2063-2069.
[14]	吕超;李爱平;徐立云;. 基于OPN与UML的可重组制造系统建模方法研究[J]. J4, 2009, 20(22): 0-2649.
[15]	李天梅;邱静;刘冠军;. 测试性模拟故障注入试验中的故障模型研究[J]. J4, 2009, 20(16): 0-1895.