[1]XIA Q, XIAO G, LONG H, et al. A Review of Process Advancement of Novel Metal Spinning [J]. International Journal of Machine Tools and Manufacture,2014,85(7):100-121.
[2]ZHAN M, YANG H, GUO J, et al. Review on Hot Spinning for Difficult-to-deform Lightweight Metals [J]. Transactions of Nonferrous Metals Society of China,2015,25(6):1732-1743.
[3]LI Y, WANG J, LU G D, et al. A Numerical Study of the Effects of Roller Paths on Dimensional Precision in Die-less Spinning of Sheet Metal [J]. Journal of Zhejiang University SCIENCE A,2014,15(6):432-446.
[4]LIU C H. The Simulation of the Multi-pass and Die-less Spinning Process[J]. Journal of Materials Processing Technology,2007,192(5):518-524.
[5]范有发, 李东南, 陈文哲. AZ31B镁合金板材旋压成形工艺研究[J]. 中国机械工程,2012,23(11):1272-1275.
FAN Youfa, LI Dongnan,CHEN Wenzhe. Study on Spinning Process of AZ31B Magnesium Alloy Sheet [J]. China Mechanical Engineering,2012,23(11):1272-1275.
[6]韩志仁,苑泽冰,曲学军. 多道次拉深中间构型对成形影响的研究[J]. 锻压技术,2013,38(4):27-31.
HAN Zhiren, YUAN Zebing, QU Xuejun. Influence on Forming Intermediate Shape in Multi-pass Deep Drawing of Sheet Metal [J]. Forging & Stamping Technology,2013,38(4):27-31.
[7]朱宇,万敏,周应科. 高温合金复杂薄壁零件多道次充液拉深技术[J].航空学报,2011,32(3):552-560.
ZHU Yu, WAN Min, ZHOU Yingke. Multi-stage Hydro-mechanical Deep Drawing of Complex Thin-walled Super Alloy Parts [J]. Acta Aeronautica Et Astronautica Sinica,2011,32(3):552-560.
[8]JIA Z, HAN Z R, XU Q, et al. Numerical Simulation and Experiment Study on Hollow Spinning Process for Square Cross-section Cone[J]. International Journal of Advanced Manufacturing Technology,2014,75(9/12):1605-1612.
[9]程秋谋,康达昌,吴海江,等. 椭圆异形件旋压工艺的研究[J]. 塑性工程学报,1997(1):56-59.
CHENG Qiumou, KANG Dachang, WU Haijiang, et al. The Study of Elliptic Spinning Technology [J]. Journal of Plasticity Engineering,1997(1):56-59.
[10]SHIMIZU I. Asymmetric Forming of Aluminum Sheets by Synchronous Spinning[J]. Journal of Materials Processing Technology,2010,210(4):585-592.
[11]XIA Q X, LAI Z Y, LONG H, et al. A Study of the Spinning Force of Hollow Parts with Triangular Cross Sections[J]. International Journal of Advanced Manufacturing Technology,2013,68(9/12):2461-2470.
[12]夏琴香,吴小瑜,张帅斌,等. 三边形圆弧截面空心零件旋压成形的数值模拟及试验研究[J]. 华南理工大学学报(自然科学版),2010,38(6):100-106.
XIA Qinxiang, WU Xiaoyu, ZHANG Shuaibin, et al. Numerical Simulation and Experimental Investigation of Spinning of Hollow Part with Triangular Arc Section [J]. Journal of South China University of Technology(Natural Science Edition),2010,38(6):100-106.
[13]JIA Z, HAN Z R, XU Q, et al. Effects of Processing Parameters on the Surface Quality of Square Section Die-less Spinning[J]. International Journal of Advanced Manufacturing Technology,2015,80(9/12):1689-1700.
[14]XIA Q, XIE S, HUO Y, et al. Numerical Simulation and Experimental Research on the Multi-pass Neck-spinning of Non-axisymmetric Offset Tube[J].Journal of Materials Processing Technology,2008,206(1):500-508. |