[1]贾娟娟.注塑螺杆的结构设计及塑化过程数值模拟研究[D].西安:陕西科技大学,2009.
JIA Juanjuan. Structure Design and Plasticization Process Numerical Simulation of the Injection Screw [D].Xi'an: Shaanxi University of Science & Technology,2009.
[2]蒋俊,郭媛,曾良才,等.间隙密封液压缸泄漏量仿真分析[J].润滑与密封,2013(7):75-79.
JIANG Jun, GUO Yuan, ZENG Liangcai, et al. Simulation and Analysis of Leakage for Clearance Seal of Hydraulic Cylinder [J].Lubrication Engineering,2013(7):75-79.
[3]周梓荣,彭浩舸,曾曙林.环形间隙中泄漏流量的影响因素研究[J].润滑与密封,2005(1):7-9.
ZHOU Zirong, PENG Haoke, ZENG Shulin. Research on the Influence Factor of Leakage in Annular Clearance Seals[J].Lubrication Engineering,2005(1):7-9.
[4]周梓荣,李夕兵,刘迎春. 环形缝隙中压力水的流动规律研究与实验 [J].中国机械工程,2005,16(11):1008-1012.
ZHOU Zirong, LI Xibing, LIU Yingchun. Study and Experiment on Flow Behavior of Pressurized-water in Annular Micro-gaps [J] China Mechanical Engineering,2005,16(11):1008-1012.
[5]徐林.湍流工况下泵的环状间隙密封内流场分析及泄漏量计算[J].水泵技术,2002(2):17-20.
XU Lin. Analysis of Flow Field in the Annular Clearance of Pump and Calculated Leakage in Turbulent Flow Condition[J].Pump Technology,2002(2):17-20.
[6]侯煜.基于CFD环形间隙泄漏量及其摩擦力的仿真计算[D].太原:太原理工大学,2007.
HOU Yu.Simulation and Calculation of Annular Gap's Leakage and Friction Based on CFD [D].Taiyuan: Taiyuan University of Technology,2007.
[7]KAZAMA T,SASAKI H,NARITA Y.Simultaneous Temperature Measurements of Bearing and Seal Parts of a Swash Plate Type Axial Piston Pump—effects of Piston Clearance and Fluid Property[J]. Journal of Mechanical Science & Technology,2010,24(1):203-206.
[8]高雨,傅连东,湛从昌,等.液压缸活塞变间隙密封结构形状研究 [J].中国机械工程,2016,27(24):3345-3350.
GAO Yu, FU Liandong, ZHAN Congchang, et al. Research on Piston Variable Clearance Sealing Structure Shape in Hydraulic Cylinders [J]. China Mechanical Engineering, 2016,27(24):3345-3350.
[9]杨秀峰.水压环形缝隙泄漏特性的理论和实验研究[D].武汉:华中科技大学,2012.
YANG Xiufeng. Theoretical and Experimental Research on Leakage Characteristics of Water Hydraulic Annular Clearance[D].Wuhan: Huazhong University of Science and Technology,2012.
[10]刘春太,陈静波,王利霞,等.注射成型过程中非牛顿塑料熔体的粘度模型[J].中国塑料,1997,11(1):48-52.
LIU Chuntai, CHEN Jingbo, WANG Lixia, et al. The Viscosity Model of Non-Newtonian Plastics Melt in Injection Molding [J].China Plastics,1997,11(1):48-52.
[11]CHIANG H H, HIEBER C A, WANG K K. A Unified Simulation of the Filling and Post filling Stages in Injection Molding. Part I: Formulation [J].Polymer Engineering and Science,1991,31(2):116 -124.
[12]赵怀学.超声波辅助精密微注塑机理及应用研究[D].天津:天津大学,2011.
ZHAO Huaixue. Study on Mechanism and Application in Precision Injection Molding of Microstructures Assisted by Ultrasonic[D]. Tianjin: Tianjin University,2011.
[13]王国志,李玉辉,吴文海,等.变形对轴向柱塞泵柱塞副泄漏量的影响研究[J].机床与液压,2011,39(17):50-52.
WANG Guozhi, LI Yuhui, WU Wenhai, et al. Influence of Deformation on Leakage of Piston and Cylinder in Axial Piston Pump[J].Machine Tool and Hydraulics,2011,39(17):50-52.
[14]曾曙林,周梓荣,尹久仁.水压环形缝隙泄漏量的实验研究[J].机床与液压,2003(2):169-171.
ZENG Shulin, ZHOU Zirong, YIN Jiuren. A Leakage Testing Research for Annular Gap under Water Hydraulic Pressure [J].Machine Tool and Hydraulics,2003(2):169-171. |