[1]王志刚. 基于PMSM的伺服系统电流环的仿真[J]. 现代机械, 2010(4): 24-26.
WANG Zhigang. The Simulation of Current Loop Based on PMSM [J]. Modern Machinery, 2010(4): 24-26.
[2]孙明佳, 曹文智, 马晓波. 基于Simulink的机床伺服进给系统仿真技术研究[J]. 制造业自动化, 2013, 35(4): 115-118.
SUN Mingjia, CAO Wenzhi, MA Xiaobo. Study on Simulation for Machine Tool Servo Feed System Based on Simulink[J]. Manufacturing Automation, 2013, 35(4): 115-118.
[3]金凤鸣. 闭环伺服系统的数学建模和性能分析[J]. 机械研究与应用, 2012(5): 30-32.
JIN Fengming. Mathematical Modeling and Performance Analysis for the Close-loop Servo System[J]. Mechanical Research & Application, 2012(5): 30-32.
[4]PENG A H, WANG Z M. Modeling and Simulation Research on Closed-loop Servo System[C]//The 5th International Conference on Computer Science and Education. Hefei, 2010: 24-27.
[5]訾斌, 朱真才, 魏明生. 交流伺服驱动系统动态建模及控制[J]. 中国机械工程, 2009, 20(8):920-923.
ZI Bin, ZHU Zhencai, WEI Mingsheng. Dynamic Modeling and Control on AC Servomechanism [J].China Mechanical Engineering, 2009, 20(8):920-923.
[6]崔君君, 洪荣晶, 陈亚林. 数控机床伺服系统速度环的研究[J]. 机床与液压, 2008, 36(3): 15-18.
CUI Junjun, HONG Rongjing, CHEN Yalin. Research of Speed Loop in Servo System of NC Machine Tool[J]. Machine Tool & Hydraulics, 2008, 36(3): 15-18.
[7]刘丽兰, 刘宏昭, 吴子英, 等. 大型数控车床进给伺服系统建模与分析[J]. 振动与冲击, 2012, 31(6): 32-35.
LIU Lilan, LIU Hongzhao, WU Ziying, et al. Modeling and Analysis of a Feed Servo System for a Large CNC Machine Tool[J]. Journal of Vibration and Shock, 2012, 31 (6): 32-35.
[8]GUO R. Three-loop Positioning Servo System of Ultra-precision Machine Tool Using Adaptive Reference Modelling[C]//International Conference on Mechatronic Sciences, Electric Engineering and Computer.Shengyang, 2014:330-334.
[9]董玉红, 杨清梅. 机械控制工程基础[M]. 2版. 北京:机械工业出版社, 2013:11-45.
DONG Yuhong, YANG Qingmei. Mechanical Control Engineering Foundation [M]. 2nd ed. Beijing: Mechanical Industry Press, 2013: 11-45.
[10]王刚. 数控机床交流伺服系统动态性能分析与参数整定技术研究[D]. 天津: 天津大学, 2010.
WANG Gang. Analysis of Dynamic Characteristics for AC Servo System and Study on Parameters-tuning. Tianjin: Tianjin University, 2010.
[11]徐东海, 刘艺. 基于机电耦合的数控铣滚齿复合加工动力学仿真[J]. 轴承, 2014(9): 16-20.
XU Donghai, LIU Yi. Dynamics Simulation on Combined Machining of NC Gear Milling and Hobbing Based on Mechatronic Coupling [J]. Bearing, 2014(9): 16-20. |