[1]KUPPAN P, RAJADURAI A, NARAYANAN S. Influence of EDM Process Parameters in Deep Hole Drilling of Inconel 718[J]. International Journal of Advanced Manufacturing Technology, 2008, 38(1):74-84.
[2]YILMAZ O, OKKA M A. Effect of Single and Multi-channel Electrodes Application on EDM Fast Hole Drilling Performance[J]. International Journal of Advanced Manufacturing Technology, 2010, 51(1):185-194.
[3]ASPINWALL D K, SOO S L, BERRISFORD A E, et al. Workpiece Surface Roughness and Integrity after WEDM of Ti-6Al-4V and Inconel 718 Using Minimum Damage Generator Technology[J]. CIRP Annals—Manufacturing Technology, 2008, 57(1):187-190.
[4]李翔龙, 殷国富, 林朝镛. 基于进化神经网络的电火花铣削加工电极损耗预测[J]. 机械工程学报, 2004, 40(3):61-65.
LI Xianglong, YIN Guofu, LIN Chaoyong. Tool Wear Prediction in Electrical Discharge Machining Based on Evolutionary Neural Network[J]. Chinese Journal of Mechanical Engineering, 2004, 40(3):61-65.
[5]KHAN A A. Electrode Wear and Material Removal Rate during EDM of Aluminum and Mild Steel Using Copper and Brass Electrodes[J].The International Journal of Advanced Manufacturing Technology, 2008, 39(5):482-487.
[6]RINA C, GAURI S K, SHANKAR C. Optimization of Correlated Responses of EDM Process [J]. Materials and Manufacturing Processes, 2012, 27(3):337-347.
[7]ZHANG M, GUO D M, JIN Z J. EDM Performance of Electroformed Cu-ZrB2 Shell Electrodes [J]. Rapid Prototyping Journal, 2009, 15(2):150-156.
[8]李剑忠, 栾纪杰, 虞慧岚, 等. 微细电火花三维加工中电极损耗补偿新方法[J]. 大连理工大学学报, 2011, 51(4):525-528.
LI Jianzhong, LUAN Jijie, YU Huilan, et al. A New Method of Electrode Wear Compensation in 3D-EDM [J]. Journal of Dalian University of Technology, 2011, 51(4):525-528.
[9]刘蜀阳, 黄玉美. 负极性电火花加工时的电极损耗机理及积碳层的减损作用研究[J]. 电子学报, 2012, 40(4):654-660.
LIU Shuyang, HUANG Yumei. The Study on the Wear Mechanism of Electrode Materials in Negative EDM Process and the Effect of Carbon Deposition Layer[J]. Acta Electronica Sinica, 2012, 40(4):654-660.
[10]ZHU D, ZENG Y B. Micro Electroforming of High-aspect-ratio Metallic Microstructures by Using a Movable Mask[J]. CIRP Annals—Manufacturing Technology, 2008, 57(1):227-230.
[11]WONG K P, CHAN K C, YUE T M. A Study of Hardness and Grain Size in Pulse Current Electroforming of Nickel Using Different Shaped Waveforms[J]. Journal of Applied Electrochemistry, 2001, 31(1):25-34.
[12]RENNIE A E W, BOCKING C E, BENNETT G R. Electroforming of Rapid Prototyping Mandrels for Electro-discharge Machining Electrodes [J]. Journal of Matrials Processing Technology[J],2001, 110(2):186-196.
[13]李丽, 程祥, 李志永, 等. Cu-SiC复合电极电火花加工烧结NdFeB永磁体的研究[J]. 功能材料, 2013, 44(22):3335-3338.
LI Li, CHENG Xiang, LI Zhiyong, et al. Electrical Discharge Machining of Sintered NdFeB Magnet Using Lectrodeposited Cu-SiC Electrode[J]. Journal of Functional Materials, 2013, 44(22):3335-3338.
[14]李丽, 殷凤仕, 牛宗伟, 等. 电沉积铜基SiC复合电极材料[J]. 功能材料, 2013, 44(22):1188-1190.
LI Li, YIN Fengshi, NIU Zongwei, et al. Electroforming SiC Reinforced Cu Based Composite Electrode[J]. Journal of Functional Materials, 2013, 44(22):1188-1190.
[15]朱增伟, 朱荻. 硬质粒子扰动对电铸铜微观结构与性能的影响[J].中国有色金属学报, 2006, 16(9):1558-1562.
ZHU Zengwei, ZHU Di. Effect of Hard Particle Perturbation on Microstructure and Property of Electroformed Copper[J]. The Chinese Journal of Nonferrous Metals, 2006, 16(9):1558-1562.
[16]LEE H T, TAI T Y, LIU C, et al. Effect of Material Physical Properties on Residual Stress Measurement by EDM Hole-drilling Method[J]. Journal of Engineering Materials and Technology, 2011, 133(2):1-8.
[17]BIERMANNA D, HEILMANNA M. Analysis of the Laser Drilling Process for the Combination
with a Single-lip Deep Hole Drilling Process with Small Diameters [J]. Physics Procedia , 2011, 12:311-319.
[18]TEIXIDOR D, FERRER I, CIURANA J, et al. Optimization of Process Parameters for Pulsed Laser Milling of Micro-channels on AISI H13 Tool Steel [J].Robotics and Computer-Integrated Manufacturing, 2013, 29(1) :209-218.
[19]LI Z Y, WEI X T, GUO Y B,et al. State-of-art, Challenges, and Outlook on Manufacturing of Cooling Holes for Turbine Blades[J]. Machining Science and Technology, 2015,19(3):361-399.
[20]王宝瑞, 孙宁. 利用电化学原理降低电火花加工的电极损耗[J]. 电加工与模具, 1997(1):30-33.
WANG Baorui, SUN Ning. Reduction of Electrode Wear in EDM by Electrochemical Principle[J]. Electromachining and Mould, 1997(1):30-33.
[21]ALFANTAZI A M, ERB U. Microhardness and Thermal Stability of Pulse-plated Zn-Ni Alloy Coatings[J]. Materials Science and Engineering, 1996, 212(1):123-129.
[22]唐宏科, 赵文轸, 杨 燕. 稀土在Ni-Co-PTFE复合电镀中的作用机制研究[J]. 稀有金属, 2006, 30(6):804-807.
TANG Hongke, ZHAO Wenzhen, YANG Yan. Study on the Mechanism of Rare Earth in Ni-Co-PTFE Composite Electroplating[J]. Rare Metals, 2006, 30(6):804-807.
[23]明平美, 朱荻, 曲宁松, 等. 电铸工艺对工具电极材料抗电蚀性能的影响研究[J]. 机械科学与技术, 2005, 24(5):591-595.
MING Pingmei, ZHU Di, QU Ningsong,et al. Study on Influence of Electroform Process on Electrical Erosion Resistance of the Tool Electrodes[J]. Mechanical Science and Technology, 2005, 24(5):591-595. |