波登管2D压力伺服阀反馈装置的特性研究

中国机械工程

波登管2D压力伺服阀反馈装置的特性研究

左希庆1,2;阮健1;李胜1;刘国文2;孙坚1

1.浙江工业大学特种装备制造与先进加工技术教育部重点实验室，杭州,310014
2.湖州职业技术学院机电与汽车工程学院，湖州,313000

出版日期:2017-02-25 发布日期:2017-02-24
基金资助:
国家自然科学基金资助项目(51405443);
浙江省自然科学基金资助项目(LZ13E050002);
浙江省科技厅公益技术资助项目(2016C31056);
湖州市科技局基金资助项目(2016YZ07)

Research on Characteristics of Bourdon Tube 2D Pressure Servo-valve Feedback Equipment

ZUO Xiqing1,2;RUAN Jian1;LI Sheng1;LIU Guowen2;SUN Jian1

1.Key Laboratory of Special Purpose Equipment and Advanced Processing Technology, Ministry of Education,Zhejiang University of Technology,Hangzhou，310014
2.Department of Mechanical and Electrical Engineering,Huzhou Vocational ＆Technical College,Huzhou,Zhejiang,313000

Online:2017-02-25 Published:2017-02-24

摘要/Abstract

摘要： 设计了2D压力伺服阀样机模型，利用波登管作为伺服压力反馈单元保持其输出压力恒定。针对波登管在特定范围内随压力线性变形的特性，在分析其变形机理的基础上，建立了数学模型，仿真分析了其受力变形过程，得到其结构参数对线性变形的影响。设计了波登管线性变形实验方案并搭建实验平台，实验结果表明：随着压力的升高，波登管的变形与压力升高基本成线性关系，16MPa时，其线性变形量为0.7mm；动态实验中波登管从受冲击开始到基本稳态耗时约0.9ms。实验结果与仿真分析基本一致，波登管的特性研究为其在2D压力伺服阀上的应用奠定了基础。

关键词: 波登管, 压力伺服阀, 伺服反馈, 静动态特性

Abstract: A prototype of 2D pressure servo-valve was designed by using Bourdon tube for servo feedback equipment to keep output pressure constant. Aiming at Bourdon tube, which was linearly changed with pressure variations in a particular range, based on the analysis of its deformation mechanism, a mathematical model was established and its deformation processes were simulated, the influences of its structural parameters on linear deformation were presented. The linear deformation experiments of Bourdon tube and its test stand were designed and built, experimental results show that the deformation has nearly linear relationship with pressure risings, the linear deformation range is as 0.7mm when system pressure is of 16MPa. In dynamic experiments of Bourdon tube, it took about 0.9ms from impacts to basic stabilizing. Experimental results and simulated analysis are basically consistent, the research lays the foundation for the applications in a 2D pressure servo-valve.

Key words: Bourdon tube, pressure servo-valve, servo feedback, static and dynamic characteristics

中图分类号:

TH137

左希庆, 阮健, 李胜, 刘国文, 孙坚. 波登管2D压力伺服阀反馈装置的特性研究[J]. 中国机械工程.

ZUO Xiqing, RUAN Jian, LI Sheng, LIU Guowen, SUN Jian. Research on Characteristics of Bourdon Tube 2D Pressure Servo-valve Feedback Equipment[J]. China Mechanical Engineering.

参考文献

[1]王积伟. 液压传动[M].北京：机械工业出版社, 2007：34-37.
WANG Jiwei. Hydraulic Drive [M]. Beijing: China Machine Press, 2007: 34-37.
[2]阮健, 裴翔, 李胜. 2D电液数字换向阀[J]. 机械工程学报, 2000, 36(3): 86-89.
RUAN Jian, PEI Xiang, LI Sheng. 2D Digital Di-rectional Control Valve[J]. Chinese Journal of Mechanical Engineering, 2000, 36(3):86-89.
[3]李胜,阮健,孟彬.2D数字阀滞环颤振补偿技术研究[J].农业机械工程学报,2011, 42(3): 208-214.
LI Sheng, RUAN Jian, MENG Bin. Dither Compensation Technology for Hysteresis of 2D Digital Valve[J].Transactions of the Chinese Society for Agricultural Machinery, 2011, 42(3): 208-214.
[4]翁善臣. 仪表弹性元件设计基础[M].北京：机械工业出版社，1982：142-150.
WENG Shanchen. Design Basis of Elastic Instrument Component [M]. Beijing: China Machine Press, 1982：142-150.
[5]徐芝纶 . 弹性力学[M].北京：高等教育出版社.2006：206-210.
XU Zhilun. Elastic Mechanics [M]. Beijing: Academic Education Press, 2006：206-210.
[6]高耀东,刘学杰. ANSYS机械工程应用精华50例[M].北京：电子工业出版社,2012：192-215.
GAO Yaodong, LIU Xuejie. 50 Cases of ANSYS Application in Mechanical Engineering[M]. Beijing: Electronic and Industry Press, 2012：192-215.
[7]哈尔滨工业大学理论力学教研室. 理论力学（I）[M].7版.北京：高等教育出版社, 2012：72-80.
Theoretical Mechanics Teaching and Research Section of Harbin Institute of Technology. Theoretical Mechanics[M]. 7th ed. Beijing: Academic Education Press, 2012：72-80.
[8]薛定宇，陈阳泉. 高等应用数学的MATLAB的求解[M].3版.北京：清华大学出版社，2014:110-116.
XUE Dingyu, CHEN Yangquan. MATLAB Solution of Academic Applied Mathematics[M]. 3rd ed. Beijing: Tsinghua University Press, 2014：110-116.
[9]盛敬超. 液压流体力学[M].北京：机械工业出版社,1980：124-128.
SHENG Jingchao. Hydraulic Fluid Mechanics[M]. Beijing: China Machine Press, 1980：124-128.