[1]NADERI M, UTHAISANGSUK V, PRAHL U, et al.A Numerical and Experimental Investigation into Hot Stamping of Boron Alloyed Heat Treated Steels[J].Steel Research International,2008, 79(2): 77-84.
[2]王敏,张春,张宇,等.汽车高强钢纵梁热冲压试验研究[J]. 中国机械工程,2016,27(3):391-397.
WANG Min, ZHANG Chun, ZHANG Yu, et al. Experiments on Hot Stamping of Car Caring of High Strength Steel [J]. China Mechanical Engineering, 2016,27(3):391-397.
[3]庄百亮,单忠德,姜 超,等.汽车防撞梁超高强钢热成形工艺研究[J].中国机械工程,2012,23(2):225-228.
ZHUANG Bailiang, SHAN Zhongde, JIANG Chao, et al.Research on Ultra-high-strength Hot Stamping Process of Automobive Anti-collision Beam[J]. China Mechanical Engineering, 2012, 23(2):225-228.
[4]LI Nan, SUN Chaoyang, GUO Ning, et al. Damage Investigation of Boron Steel at Hot Stamping Conditions[C]//11th International Conference on Technology of Plasticity.Nagoya, 2014: 19-24.
[5]盈亮,史栋勇,胡平,等.基于连续介质损伤力学的高强度钢板热成形性数值预测[J].机械工程学报,2016,52(4):36-44.
YING Liang, SHI Dongyong, HU Ping, et al. Numerical Prediction of the Formability during Hot Forming of High Strength Steel Based on Continuum Damage Mechanics[J]. Journal of Mechanical Engineering, 2016,52(4):36-44.
[6]SHI D Y, YING L, HU P, et al. Experimental and Numerical Determination of Thermal Forming Limit Diagrams (TFLD) of High Strength Steel 22MnB5[C]// 11th International Conference on Numerical Methods in Industrial Forming Processes:Shenyang, 2013: 406-413.
[7]CUI Junjia, SUN Guangyong, XU Junrui, et al. A Method to Evaluate the Formability of High-strength Steel in Hot Stamping[J]. Materials and Design, 2015, 77: 95-109.
[8]NACEUR H, DELAMZIERE A, BATOZ J L, et al. Some Improvements on the Optimum Process Design in Deep Drawing Using the Inverse Approach[J]. Journal of Materials Processing Technology, 2004, 146(2): 250-262.
[9]WEI Donglai, CUI Zhenshan, CHEN Jun. Optimization and Tolerance Prediction of Sheet Metal Forming Process Using Response Surface Model[J].Computational Materials Science, 2008, 42(2): 228-233.
[10]ZHUANG Weimin, ZHANG Mengxi, CHEN Yanhong. Error Analysis of FLC Experimental Data at Warm/Hot Stamping Conditions[J]. Chinese Journal of Mechanical Engineering, 2014, 27(4): 730-737.
[11]ZHANG Huawei, LIU Xianghua, LIU Lizhong, et al. Study on Nonuniform Deformation of Tailor Rolled Blank during Uniaxial Tension[J]. Acta Metall. Sin. (Engl. Lett.), 2015, 28(9): 1198-1204.
[12]CHANG Ying, TANG Xinghui, ZHAO Kunmin, et al. Investigation of the Factors Influencing the Interfacial Heat Transfer Coefficient in Hot Stamping [J]. Journal of Materials Processing Technology, 2016, 228: 25-33.
[13]高云凯,邓有志,曹 伟.超高强度钢车身B柱加强板热成形工艺参数多目标优化[J].中国机械工程,2011,22(5):621-629.
GAO Yunkai, DENG Youzhi, CAO Wei. Multi-objective Optimization for Ultra High Strength Steel B-pillar of Car Body Hot Forming Process Parameters[J]. China Mechanical Engineering, 2011,22(5):621-629. |