基于等效运动副化及运动副退化的公差分析法

摘要/Abstract

摘要： 针对公差不仅在数值上具有随机性，其所约束的几何特征在空间的位置姿态上也具有随机性的特点，提出了公差约束等效运动副化及运动副退化法。等效运动副化将公差约束的几何特征转化为被运动副控制的几何特征，该等效运动副本身是虚拟的具有多自由度的等效运动副，将公差约束的几何特征转化为被多自由度运动副控制的几何特征，装配体转变为一个无误差的开环机械臂，考虑到因装配工艺而产生的不同运动副自由度之间的相互制约的现象，采用运动副退化法去除冗余自由度，由此建立装配体公差分析模型，并将装配体公差模型分析的数值与加工装配体的实验检测值进行对比。

关键词: 公差分析, 等效运动副化, 运动副退化, 公差累积

Abstract: Subject to the random characteristics in deformations, position and value of the features which were constrained by tolerance, a method to analyze the stack-up of tolerance by deeming tolerance constrains to equivalent kinematic pair was proposed herein. Under the situation of equivalent kinematic pair, the features constrained by tolerance were transformed to the features constrained by n-DOF of kinematic pair and the assembly would be transformed to a robot arm, which connected by the rigid parts and without any errors. As the results of the assembly processes, the affections of interaction among different kinematic pairs were the emerging problems after transformed. To deal with that problems, the method of degradation for kinematic pair was proposed herein. Then the formula to analyze stack-up of tolerance was established based on the method of equivalent kinematic pair and degradation for kinematic pair. Finally, those methods were used to analyze a realistic assemble product, and compared the calculated values with the experimental results.

Key words: tolerance analysis, equivalent kinematic pair, degradation of kinematic pair, tolerance stack-up

中图分类号:

TH115

尹立明, 叶佩青, 张辉. 基于等效运动副化及运动副退化的公差分析法[J]. 中国机械工程.

Yin Liming, Ye Peiqing, Zhang Hui. Tolerance Analysis Based on Equivalent Kinematic Pair and Degradation of Kinematic Pair[J]. China Mechanical Engineering.

参考文献

[1]Wu Yuguang. Assembly Tolerance Analysis Method Based on the Real Machine Model with Three Datum Planes Location[J].Procedia CIRP,2015, 27: 47-52.

[2]Li H, Zhu H P, Li P G, et al. Tolerance Analysis of Mechanical Assemblies Based on Small Displacement Torsor and Deviation Propagation Theories[J].International Journal of Advanced Manufacturing Technology,2014, 72(1/4): 89-99.

[3]Li C L, Yang J X, Wang J Y, et al. A Comparison Study of Small Displacement Torsor and Analysis Line Methods for Functional Tolerance Analysis[J]. Advanced Materials Research, 2012, 605/607(4):358-364.

[4]Zhang W M, Chen C, Li Pengzhong, et al. Tolerance Modeling in Actual Working Condition Based on Jacobian-torsor Theory[J]. Computer Integrated Manufacturing Systems CIMS, 2011, 17(1):77-83.

[5]Hong Y S, Chang T C. A Comprehensive Review of Tolerancing Research[J]. International Journal of Production Research,2002, 40(11): 2425-2459.

[6]Chang-Hsin K, Jhy-Cherng T. An Analytical Computation Method for Statistical Tolerance Analysis of Assemblies with Truncated Normal Mean Shift[J]. International Journal of Production Research,2011, 49(7): 1937-1955.

[7]Barbero B R, Aragón A C, Pedrosa C M. Validation of a Tolerance Analysis Simulation Procedure in Assemblies[J]. International Journal of Advanced Manufacturing Technology,2015, 76(5/8):1-14.

[8]Li H, Zhu H, Li P, et al. Tolerance Analysis of Mechanical Assemblies Based on Small Displacement Torsor and Deviation Propagation Theories[J].International Journal of Advanced Manufacturing Technology, 2014, 72(1/4):89-99.

[9]Li X L, Li G H, Wang J Y, et al. Three Dimensional Assembly Tolerance Analysis of Gear Drivetrain[J]. Advanced Materials Research,2013, 655/657:1656-1661.

[10]吴玉光，刘玉生.面向公差技术的几何要素自由度表示与操作及其应用[J].中国机械工程， 2015，26(11): 1509-1515.

Wu Yuguang，Liu Yusheng. DOF Representation and Operation of Geometric Feature and Its Applications for Tolerance Technology[J].China Mechanical Engineering,2015，26(11): 1509-1515.

[11]Jaishankar L N, Davidson J K, Shah J J. Tolerance Analysis of Parallel Assemblies Using Tolerance-maps and A Functional Map Derived from Induced Deformations[C]//Proceedings of The ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference.Portland, 2013:V03BT03A008.

[12]Govindarajalu J, Karuppan S, Manoharan T. Tolerance Design of Mechanical Assembly Using NSGA II and Finite Element Analysis[J]. Journal of Mechanical Science and Technology,2012, 26(10): 3261-3268.

[13]Sahani A K, Jain P K, Sharma S C. Tolerance Stack up Analysis for Angularity of Components and Their Assembly[J]. Procedia Engineering, 2014, 69(1):952-961.

[14]Marziale M, Polini W. Review of Variational Models for Tolerance Analysis of an Assembly[J]. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 2011, 225(B3):305-318.

[15]Dumas A, Gayton N, Dantan J Y, et al. A new System Formulation for the Tolerance Analysis of Overconstrained Mechanisms[J].Probabilistic Engineering Mechanics, 2015, 40:66-74.

[16]Tang S Y, Guan D, Wu X, et al. Analysis on Virtual Assembly Tolerance for Pitch-adjustable Lateral Propulsion Device [J]. Procedia CIRP, 2015, 27:131-136.

[17]余治民，刘子建，董思科，等.基于蒙特卡罗模拟与响应面方法的公差建模[J].中国机械工程， 2015,26(4): 427-434.

Yu Zhimin,Liu Zijian,Dong Sike,et al.Tolerance Modeling Based on Monte-Carlo Simulation and Response Surface Method[J].China Mechanical Engineering,2015,26(4): 427-434.

[18]Khodaygan S, Movahhedy M R.Tolerance Analysis of Assemblies with Asymmetric Tolerances by Unified Uncertainty-accumulation Model Based on Fuzzy Logic[J]. International Journal of Advanced Manufacturing Technology, 2011, 53(5/8): 777-788.

[19]Wang Hui,Yu Tianxiang,Pang Huan,et al. Mechanism Reliability Simulation Analysis for Multi-support Axis Seizure Considered Assembly Tolerance[C]//International Conference on Quality, Reliability,Risk,Maintenance,and Safety Engineering.Xi'an,2011: 35-41.