受轧件水平振动影响的板带轧机非线性振动特性

摘要/Abstract

摘要： 基于Roberts摩擦因数公式和Hill轧制力公式,建立能够表征不同摩擦状态下的动态轧制力模型;在此基础上进一步考虑轧机结构的振动和轧件振动之间的相互影响,提出轧件-轧辊耦合振动模型。根据广义耗散的Lagrange原理,分别沿轧制方向和垂直于轧制方向建立动力学平衡方程;采用多尺度法求解出考虑系统内共振的幅频特性方程,并仿真分析不同外部激励和非线性参数作用下的轧机振动规律。研究结果表明：滑动摩擦状态下耦合系统对内部非线性参数变化和外部扰动变化的敏感程度远远高于静摩擦状态下的情况;适当选取耦合三次项非线性参数,可以将系统不稳定振动的出现控制在一个较小的频率区间,削弱轧件-轧辊耦合振动对板带轧机振动的影响。

关键词: 板带轧机, 非线性的, 动态轧制力, 多尺度法, 耦合振动

Abstract: Based on the Roberts friction factor formula and the Hill rolling force formula, a kind of dynamic rolling force model was established. The model might characterize different friction states. On the basis of further consideration of the interaction between the structure of rolling mill vibrations and rolled piece vibrations, a coupling vibration model of rolled piece-roll was proposed. According to the Lagrange principle of generalized dissipation, a dynamic equilibrium equation was established respectively both of in rolling direction and in vertical direction. Then by using the method of multiple scales, the amplitude-frequency characteristic equation of the system was solved. The law of mill vibration influenced by different internal nonlinear parameters and external excitations was analyzed. Research results show that when rolled piece is slided, the coupling system is far more sensitive to the change of internal nonlinear parameters and external excitation than static state. If the coupling cube nonlinear parameters are reasonable, the occurance of system unstable vibration may be controlled in a small frequency range, which may weaken the impacts from rolled piece-roll coupling system on the vibration of strip mill.

Key words: strip mill, nonlinear, dynamic rolling force, multiple scale method, coupling vibration

中图分类号:

TG113
TB123

刘彬, 姜甲浩, 刘飞, 刘浩然, 李鹏. 受轧件水平振动影响的板带轧机非线性振动特性[J]. 中国机械工程.

Liu Bin, Jiang Jiahao, Liu Fei, Liu Haoran, Li Peng. Nonlinear Vibration Characteristics of Strip Mill Influenced by Horizontal Vibration of Rolled Piece[J]. China Mechanical Engineering.

参考文献

[1]Brusa E, Lemma L. Numerical and Experimental Analysis of the Dynamic Effects in Compact Cluster Mills for Cold Rolling[J]. Journal of Materials Processing Technology, 2009, 209(5):2436-2445.

[2]马维金，李凤兰，王俊元，等. 四辊轧机的六自由度垂直振动模型研究[J]. 中国机械工程, 2011, 22(24):2962-2965.

Ma Weijin, Li Fenglan, Wang Junyuan, et al. Modeling and Validation of Vetical Vibration with 6 Degrees of Freedom for 4-high Hot Strip Mill Stand[J]. China Mechanical Engineering, 2011, 22(24):2962-2965.

[3]段吉安，钟掘. 高速轧机工作界面的负阻尼特性[J]. 中南工业大学学报，2002,33(4):401-404. Duan Ji'an, Zhong Jue. Negative Damping of Rolling Interface for Rolling Chatter[J]. Journal of Central South University of Technology, 2002,33(4):401-404.

[4]陈勇辉，廖广兰，史铁林，等. 四辊冷带轧机摩擦型颤振机理的研究[J]. 华中科技大学学报(自然科学版)，2003，31(1):105-107.

Chen Yonghui, Liao Guanglan, Shi Tielin, et al. Friction-type Chatter on 4-h Cold Rolling Mills[J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2003, 31(1):105-107.

[5]Sun Jiangliang, Peng Yan, Liu Hongmin. Coupled Dynamic Modeling of Rolls Model and Metal Model for Four High Mill Based on Strip Crown Control[J]. Chinese Journal of Mechanical Engineering, 2013,26(1):144-150.

[6]闫晓强，刘丽娜，曹曦，等. CSP轧机万向接轴弯扭耦合振动[J]. 北京科技大学学报, 2008, 30(10):1158-1162.

Yan Xiaoqiang, Liu Lina, Cao Xi, et al. Coupling of Lateral and Torsional Vibration for the Spindle of a CSP Mill[J]. Journal of University of Science and Technology Beijing, 2008,30(10):1158-1162.

[7]李永强，刘杰，刘宇，等. 碰摩转子弯扭摆耦合振动非线性动力学特性[J]. 机械工程学报, 2007, 43(2):44-49.

Li Yongqiang, Liu Jie, Liu Yu, et al. Nonlinear DynamicsCharacteristics of Rubbing Rotor with Bending Torsional Pendular Coupling Vibrations[J]. Journal of Mechanical Engineering, 2007, 43(2):44-49.

[8]闫晓强. 热连轧机机电液耦合振动控制[J]. 机械工程学报, 2011, 47(17):61-65.

Yan Xiaoqiang. Machinery-electric-hydraulic Coupling Vibration Control of Hot Continuous Rolling Mills[J]. Journal of Mechanical Engineering, 2011,47(17):61-65.

[9]王瑞鹏，彭艳，张阳，等. 轧机耦合振动机理研究[J]. 机械工程学报, 2013, 49(12):66-71.

Wang Ruipeng, Peng Yan, Zhang Yang, et al. Mechanism Research of Rolling Mill Coupled Vibration[J]. Journal of Mechanical Engineering, 2013,49(12):66-71.

[10]王桥医，黄海军，李志华. 金属塑性加工工作界面非稳态润滑轧机振动控制[J]. 中南大学学报(自然科学版),2010, 41(4):1418-1423.

Wang Qiaoyi, Huang Haijun, Li Zhihua. Control of Mill Vibration for Unsteady Lubrication Based on Metal-forming Processes[J]. Journal of Central South University(Science and Technology), 2010, 41(4):1418-1423.

[11]侯东晓，朱月，刘浩然，等. 基于动态轧制力的冷轧机非线性振动特性研究[J]. 机械工程学报, 2013, 49(14):45-50.

Hou Dongxiao, Zhu Yue, Liu Haoran, et al. Research on Nonlinear Vibration Characteristics of Cold Rolling Mill Based on Dynamic Rolling Force[J].

Journal of Mechanical Engineering, 2013, 49(14):45-50.

[12]邹家祥. 冷连轧机系统振动控制[M]. 北京：冶金工业出版社, 1998.

[13]陈勇辉，刘世元，廖广兰. 四辊冷带轧机三倍频颤振机理的研究[J]. 机械工程学报, 2003, 39(6):118-123.

Chen Yonghui, Liu Shiyuan, Liao Guanglan. Study on Third-octave-mode on 4-h Cold Rolling Mills[J]. Journal of Mechanical Engineering, 2003, 39(6):118-123.

[1]	王冠1；张骞2；寇琳媛1；刘志文3；李世康3. 基于混合元胞自动机算法的连续体结构非线性拓扑优化[J]. 中国机械工程, 2020, 31(18): 2161-2173.
[2]	刘延伟1;朱云学1;林子越1;赵克刚2;黄谢鑫3. 考虑自锁元件动态特性的超越离合器-齿轮系统模型研究[J]. 中国机械工程, 2019, 30(15): 1765-1775.
[3]	王欣；喻豪杰；顾振华；胡伟楠. 计及二阶效应的一种桁架臂几何非线性方法[J]. 中国机械工程, 2019, 30(13): 1540-1544.
[4]	陆海英, 韩霄翰, 李忠继, 何翔, 刘开成, 陈志贤. [BIM模型与智能设计]中低速磁浮系统起浮阶段的振动特性分析[J]. 中国机械工程, 2019, 30(03): 318-324.
[5]	杨江林1;张诗阳2. 基于非线性拓扑优化的汽车变厚度保险杠耐撞性设计[J]. 中国机械工程, 2017, 28(17): 2109-2114.
[6]	韩为铎, 卢剑伟, 龙道江. 变刚度钢板弹簧加速寿命试验程序载荷谱编制[J]. 中国机械工程, 2017, 28(02): 144-149.
[7]	宋作军. 汽车半主动悬架的非线性动力学分析[J]. 中国机械工程, 2016, 27(20): 2835-2839.
[8]	李冲, 许立忠, 邢继春. 压电驱动器非线性机电耦合动力学求解与验证[J]. 中国机械工程, 2015, 26(24): 3275-3281.
[9]	陈洪月, 刘烈北, 马英, 张瑜, 谢苗, . 随机激励下掘锚联合机纵向非线性振动特性分析[J]. 中国机械工程, 2015, 26(17): 2378-2384.
[10]	姚丙盟, 刘志平, 李文锋. 基于双稳态的振动能量收集系统的设计[J]. 中国机械工程, 2015, 26(13): 1736-1741.
[11]	王时龙, 田波, 周杰, 赵昱, 程成. 多股簧冲击载荷特性试验研究[J]. 中国机械工程, 2014, 25(21): 2925-2929.
[12]	张俊红, 王凯楠, 毕凤荣, 郭鹏, 何振鹏. 基于状态空间的车辆耦合振动系统分析及优化[J]. 中国机械工程, 2014, 25(21): 2975-2981.
[13]	刘彬, 赵红旭, 朱月, 刘浩然, 侯东晓. 基于动态轧制力的冷轧机两自由度垂直振动特性[J]. 中国机械工程, 2014, 25(17): 2344-2350.
[14]	任福深1;陈素丽1;姚志刚21.. 轴向载荷作用下细长柔性旋转梁横向振动响应分析[J]. 中国机械工程, 2013, 24(24): 3392-3396.
[15]	王艾伦, 李帅. 含呼吸式裂纹的失谐叶盘系统响应特性研究[J]. 中国机械工程, 2013, 24(02): 169-174.