[1]陈永鹏, 曹华军, 李先广,等.高速干切滚齿机床热变形误差模型及试验研究[J].机械工程学报,2013,49(7):36-42.
Chen Yongpeng,Cao Huajun,Li Xianguang,et al.Study on Modeling and Experiment of Thermal Deformation Error for High-speed Dry Hobbing Machine[J].Journal of Mechanical Engineering,2013,49(7):36-42.
[2]李先广,刘飞,曹华军.齿轮加工机床的绿色设计与制造技术[J].机械工程学报,2009,45(11):140-145.
Li Xianguang,Liu Fei,Cao Huajun.Green Design and Manufacturing Technology of Gear Cutting Machine[J].Journal of Mechanical Engineering,2009,45(11):140-145.
[3]Bouzakis K D,Friderikos O,Tsiafis I.FEM-supported Simulation of Chip Formation and Flow in Gear Hobbing of Spur and Helical Gears[J].Journal of Manufacturing Science and Technology,2008(1):18-26.
[4]Friderikos O,Maliaris G,David C N,et al.An Investigation of Cutting Edge Failure due to Chip Crush in Carbide Dry Hobbing Using the Finite Element Method[J].Advanced Manufacturing Technology,2011,57:297-306.
[5]Attanasio A,Ceretti E,Rizzuti S,et al.3D Finite Element Analysis of Tool Wear in Machining[J].Manufacturing Technology, 2008, 57: 61-64.
[6]黄美霞,武文革.基于Deform3D的高速车削加工仿真研究[J].工具技术,2008,42(10):70-73.
Huang Meixia,Wu Wenge.FEM Simulation of High-speed Turning Based on Deform-3D[J].Tool Engineering,2008,42(10):70-73.
[7]高兴军,李萍,闫鹏飞,等.基于Deform3D不锈钢钻削机理的仿真研究[J].工具技术,2011,45(4):17-20.
Gao Xingjun,Li Ping,Yan Pengfei,et al. Simulation of Stainless Steel Drilling Mechanism Based on Deform-3D[J].Tool Engineering, 2011,45(4):17-20.
[8]宋健.基于DEFORM3D的发动机缸体钻削仿真及切削参数优化[D].大连:大连理工大学,2012. |