基于CATIA平台的汽车覆盖件翻边成形过程同步模拟

中国机械工程 ›› 2015, Vol. 26 ›› Issue (1): 120-124.

基于CATIA平台的汽车覆盖件翻边成形过程同步模拟

丁天旭;柳玉起;章志兵;余文;杜亭

华中科技大学材料成形与模具技术国家重点实验室，武汉，430074

出版日期:2015-01-10 发布日期:2015-01-15
基金资助:
中央高校基本科研业务费专项资金资助项目(2012QN044);华中科技大学材料成形与模具技术国家重点实验室自主课题资助项目(2013-08)

Flanging Process Synchronized Simulation for Automobile Panels Based on CATIA Platform

Ding Tianxu;Liu Yuqi;Zhang Zhibing;Yu Wen;Du Ting

State Key Laboratory of Material Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan,430074

Online:2015-01-10 Published:2015-01-15
Supported by:
Fundamental Research Funds for the Central Universities( No. 2012QN044)

摘要/Abstract

摘要：

基于CATIA平台，开发了汽车覆盖件翻边成形模拟系统。系统将结构设计中模具结构行程图思想引入翻边成形模拟中，综合考虑了翻边方向、驱动角与翻边行程对实际工艺的影响，该系统可真实反映翻边运动关系，以及翻边镶块交刀对翻边成形过程的影响，并在求解计算前通过动画演示的方式进行运动仿真，对工具运动进行干涉检查。同时，系统将CAE模型作为CATIA的特征集成于CAD平台上，实现了CAD设计模型与CAE分析模型的同步更新，避免了平台转化过程中模型数据丢失与精度损失，缩短了CAE反复建模的时间，提高了设计效率。最后通过汽车后围外板的翻边实例分析，验证了系统的准确性和稳定性。

关键词: 汽车覆盖件, CATIA自定义特征, 同步模拟, 结构行程图

Abstract:

FS(flanging simulation) system for automobile panels was developed based on the CATIA platform. This system introduced the idea of the mold structure travel diagram into FS, and took into account the flanging direction, drive angle and stroke's impact on flanging forming, which could truly reflect flanging movement relationships and effects of inserted cross-cutting on flanging. It made motion simulation by the way of animation, which could check interference of tool moving. It also achieved the CAD/CAE integration, which avoided losing model data and accuracy during the platform transformation.In the CATIA user-defined feature updating mechanism, this system can update CAD models and CAE models synchronously, which can save the CAE modeling time repeatedly during early stage of product design, improve the efficiency of the designers. Through analyzing specific case, the stability and accuracy was proved.

Key words: automobile panel, CATIA user-defined feature, synchronized simulation, structure travel diagram

中图分类号:

丁天旭, 柳玉起, 章志兵, 余文, 杜亭. 基于CATIA平台的汽车覆盖件翻边成形过程同步模拟[J]. 中国机械工程, 2015, 26(1): 120-124.

Ding Tianxu, Liu Yuqi, Zhang Zhibing, Yu Wen, Du Ting. Flanging Process Synchronized Simulation for Automobile Panels Based on CATIA Platform[J]. China Mechanical Engineering, 2015, 26(1): 120-124.

[1]	尹国涛1;朱政赫2;宫虎1;卢振丰2;雍华山2;刘磊3;何伟3. 基于工业机器人的汽车覆盖件柔性冲孔系统[J]. 中国机械工程, 2019, 30(04): 494-497,402.
[2]	李巧敏, 柳玉起, 章志兵, 杜亭. 基于CATIA的汽车覆盖件成形模拟后处理系统[J]. 中国机械工程, 2015, 26(6): 831-836.
[3]	张华. 等效拉深筋精细数值化模型与起皱模拟应用 [J]. 中国机械工程, 2010, 21(21): 2624-2627.
[4]	阮景奎;宫爱红;周学良;. 钼铬合金铸铁高速切削加工的有限元模拟[J]. J4, 2009, 20(11): 0-1385.
[5]	伍驭美;杨柏强;周杰;杨明;. V形压料面在汽车覆盖件拉深模设计中的应用[J]. J4, 2008, 19(22): 0-2714.