基于冷气体的安全气囊模拟起爆试验方法研究

中国机械工程 ›› 2014, Vol. 25 ›› Issue (9): 1261-1267.

基于冷气体的安全气囊模拟起爆试验方法研究

白中浩;龙瑶;王玉龙

湖南大学汽车车身先进设计制造国家重点实验室,长沙,410082

出版日期:2014-05-10 发布日期:2014-05-15
基金资助:
国家自然科学基金资助项目(51105137)；中央高校基本科研业务费专项资金资助项目（531107040572）

Research on Simulation Method of Blasting Test of Airbag Based on Cold Gas

Bai Zhonghao;Long Yao;Wang Yulong

State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body,Hunan University,Changsha,410082

Online:2014-05-10 Published:2014-05-15
Supported by:
National Natural Science Foundation of China（No. 51105137）;Fundamental Research Funds for the Central Universities( No. 531107040572)

摘要/Abstract

摘要：

针对安全气囊起爆试验依赖气体发生器的问题,按照国内外安全气囊开发试验法规,采用冷气体压缩替代火药气体发生器的方法,开发了一种安全气囊模拟起爆试验装置。设计了展开装置并采用ANSYS软件对其强度及气密性进行了分析,利用Fluent软件分析了标定装置中密闭容器的形状对压力-时间(p-t)曲线的影响,并基于虚拟仪器技术开发了该试验装置的测控系统。最后,进行了两组不同型号安全气囊的模拟起爆试验,结果表明,该试验装置能迅速准确地展开安全气囊,从而验证了该试验方法的有效性和准确性。

关键词: 安全气囊, 试验方法, 冷气体, p-t曲线

Abstract:

Aiming at the fact that the blasting test of airbag is depended on real inflators, according to the test regulations of airbag, a method of compressing cold gas to replace the pyrotechnic inflators was used to develop a test device to simulate the blasting test of airbag. The deployment device used for airbag was designed, and the strength and gas tightness of this device was also analyzed by ANSYS. Meanwhile, the Fluent software was used to analyze the effect of the tank shape of the calibration device on the p-t curve. A measurement and control system was developed based on the virtual instrument. Finally, two group airbags with different types were used to simulate the blasting test, the test results demonstrate that this test device can inflate the airbag rapidly and accurately, and the effectiveness and accuracy of the method were also validated.

Key words: airbag, test method, cold gas, p-t curve

中图分类号:

U461.91

白中浩, 龙瑶, 王玉龙. 基于冷气体的安全气囊模拟起爆试验方法研究[J]. 中国机械工程, 2014, 25(9): 1261-1267.

Bai Zhonghao, Long Yao, Wang Yulong. Research on Simulation Method of Blasting Test of Airbag Based on Cold Gas[J]. China Mechanical Engineering, 2014, 25(9): 1261-1267.

参考文献

[1]张金换，杜汇良，马春生,等. 汽车碰撞安全性设计[M]. 北京：清华大学出版社, 2010.
[2]黄晶，钟志华，胡林,等. 新型管式安全气囊的防护性能分析及结构优化[J].机械工程学报, 2009，45(6)：107-112.
Huang Jing，Zhong Zhihua，Hu lin，et al. Protecting Performance Analysis and Structural Optimization of a Sandwiched Tube-type Airbag[J]. Journal of Mechanical Engineering, 2009，45(6)：107-112.
[3]Zhang Honglu, Raman S, Gopal M, et al. Comparison of CFD Integrated Airbag Models in LS-DYNA, MADYMO and PAM-CRASH[J].SAE Paper,2004-01-1627.
[4]黎启柏，刘智砚，董铸荣. 利用液体二氧化碳对安全气囊的充气过程分析[J].重庆科技学院学报,1999,14(3/4):179-181.
Li Qibai, Liu Zhiyan, Dong Zhurong. Process Analysis of Airbag Inflation with Liquid CO2[J].Journal of Chongqing University of Science and Technology, 1999, 14(3/4):179-181.
[5]Duma S M, Rudd R W. A Pneumatic Airbag Deployment System for Experimental Testing[J]. Journal of Passenger Cars, 1997, 106(6)：214-222.
[6]苏睿. 安全气囊试验系统设计及复合管式安全气囊研究[D].长沙：湖南大学, 2006.
[7]Slaats P M, Pitonyak A J, Wipasuramonton P, et al. Alternative Airbag Evaluation Methodology through Cold Gas Inflation System[J].SAE Paper,2008-01-0352.
[8]Wang D, Willams C, Miller C. The Use of Cold Gas System in Airbag Cushion Evaluation[C]//2008 China International Conference of Automotive Safety Technology. Shanghai,2008:101-105.
[9]中国国家标准化管理委员会．GB/T19949-2005 道路车辆安全气囊部件[S]．北京：中国标准出版社，2005.
[10]SAE J2238. Airbag Inflator Ballistic Tank Test Procedure Gas Generators Used in Inflatable Restraint Systems[S]. Warrendale,PA: Society of Automotive Engineers Inc., 2001.
[11]SAE J1630. Driver or Passenger Airbag Module Deployment Test Procedure[S].Warrendale,PA: Society of Automotive Engineers Inc.,2001.
[12]刘子建，黄天泽，张建华,等. 安全气囊对汽车乘员碰撞损伤防护的研究[J].机械工程学报，2001，37(5)：12-17.
Liu Zijian，Huang Tianze，Zhang Jianhua, et al. For Occupant Injury Prevention from Vehicle Impacts[J]. Chinese Journal of Mechanical Engineering，2001, 37(5):12-17.
[13]王积伟，章宏甲，黄谊. 液压与气压传动[M].2版.北京：机械工业出版社，2005.
[14]史佚，陈乾斌，司冀. 气动元件等温流动近似流量公式的探讨[J].液压与气动密封，2010(9)：19-22.
Shi Yi，Chen Qianbin, Si Ji. An Approach to Approximate Isothermal Flow-rate Formula for Pneumatic Components: Also an Discussion on Choosing b[J]. Hydraulics Pneumatics and Seals, 2010(9):19-22.
[15]刘建斌，陈平霞. 安全气囊气体发生器Tank试验中p-t曲线的分析[C] //2007年中国汽车工程学会年会.天津，2007：264-267.
[16]李进良，李承曦，胡仁喜,等. 精通Fluent6.3流场分析[M].北京：化学工业出版社，2009.