[1]赵宏林,丁庆新,曾鸣,等. 机床结合部特性的理论解析及应用[J]. 机械工程学报,2008,44(12):208-214.
Zhao Honglin, Ding Qingxin, Zeng Ming, et al.Theoretic Analysison and Application of Behaviors of Machine Tool Joints[J]. Chinese Journal of Mechanical Engineering, 2008, 44(12):208-214.
[2]张学良. 机械结合面动态特性及应用[M]. 北京:中国科学技术出版社,2002.
[3]王禹林,吴晓枫,冯虎田. 基于结合面的大型螺纹磨床整机静动态特性优化[J]. 振动与冲击,2012,31(20):147-152.
Wang Yulin, Wu Xiaofeng, Feng Hutian. Static and Dynamic Characteristics Optimization for a Whole Large-sized Thread Grinder Based on Joint Surface[J]. Journal of Vibration and Shock, 2012,31(20): 147-152.
[4]曹定胜,王学林,张宏志. 高速加工中心有限元计算模型与实验验证[J]. 振动与冲击,2006,25(3):190-192.
Cao Dingsheng, Wang Xuelin, Zhang Hongzhi. FE Model and Experimental Verification for Machine Center Modal Analysis[J]. Journal of Vibration and Shock,2006, 25(3): 190-192.
[5]冯砚博,孙涛. 多线切割机床动力学分析[J]. 振动与冲击,2011,30(7):169-172.
Feng Yanbo, Sun Tao. Dynamic Analysis of Multi Wire Saw[J]. Journal of Vibration and Shock, 2011, 30(7): 169-172.
[6]Fu Weiping, Huang Yumei, Zhang Guangpeng. Experimental Investigation on Damping Behavior of Normal Joint Surfaces at Unit Area[J]. Modeling, Measurement & Control, B, 1993, 51(2): 13-20.
[7]张华,袁军堂,汪振华. 滚动导轨结合面动态特性参数识别实验研究[J]. 中国机械工程,2011,22(4):415-418.
Zhang Hua, Yuan Juntang, Wang Zhenhua.Experimental Research on Identification of Dynamic Characteristic Parameters of Rolling Guide’s Joint[J]. China Mechanical Engineering, 2011, 22(4): 415-418.
[8]陈新,孙庆鸿,毛海军,等. 基于接触单元的磨床螺栓连接面有限元建模与模型修正[J]. 中国机械工程,2001,12(5):524-526.
Chen Xin, Sun Qinghong, Mao Haijun, et al.Modeling and Correcting FEM with Contact Element forthe Combined Surfaces of Grinder Bolts[J].China Mechanical Engineering, 2001, 12(5): 524-526.
[9]王立华,罗建平,刘泓滨,等. 铣床关键结合面动态特性研究[J]. 振动与冲击,2008,28(8):125-129.
Wang Lihua, Luo Jianping, Liu Hongbin, et al. Research on Dynamic Characteristics of Key Machine Joint Surfaces of the Numerically Controled Milling Machine[J]. Journal of Vibration and Shock,2008, 28(8): 125-129.
[10]黎定仕,张以都,王鹏. 基于结构阻尼的机械结合部动力学模型研究[J]. 振动与冲击,2010,29(8):204-208.
Li Shiding, Zhang Yidu, Wang Peng. Dynamic Model of Machine Joints Based on Structure Damping[J]. Journal of Vibration and Shock,2010, 29(8): 204-208.
[11]Yoshimura M, Okushima K.Computer-aided Design Improvement of Machine Tool Structure Incorporating Joint Dynamics Data[J]. Annals of the ICRP, 1979, 28(1): 241-246.
[12]Srinivas M, Patnailk L M. Adaptive Probabilities of Crossover and Mutation in Genetic Algorithms[J].IEEE Transaction on System, Man and Cybernetics, 1994,24(4):656-667.
[13]任子武,伞冶. 自适应遗传算法的改进及在系统辨识中应用研究[J]. 系统仿真学报,2006,18(1):41-43.
Reng Ziwu, San Ye.Improved Adaptive Genetic Algorithm and Its Application Researchin Parameter Identification[J]. Journal of System Simulation, 2006, 18(1): 41-43.
[14]Mao Kuanmin, Li Bin, Wu Jun, et al.Stiffness Influential Factors-based Dynamic Modeling and Its Parameter Identification Method of Fixed Joints in Machine Tools[J]. International Journal of Machine Tools & Manufacture, 2010, 50(2): 156-164.
[15]Heller L, Foltete E, Piranda J. Experimental Identification of Nonlinear Dynamic Properties of Built-up Structures[J]. Journal of Sound and Vibration, 2009, 327(1): 183-196.
[16]Jalali H,Ahmadian H,Mottershead J E. Identification of Nonlinear Bolted Lap-joint Parameters by Force-state Mapping[J]. International Journal of Solids and Structures, 2007, 44(25/26): 8087-8105.
[17]Tian Hongliang,Li Bin,Liu Hongqi,et al.A New Method of Virtual Material Hypothesis-based Dynamic Modeling on Fixed Joint Interfacein Machine Tools[J]. International Journal of Machine Toolsand Manufacture, 2011, 51(3): 239-249.
[18]温淑花,张宗阳,张学良,等.固定结合面刚度分形模型[J]. 农业机械学报,2013,44(2):255-260.
Wen Shuhua, Zhang Zongyang, Zhang Xueliang, et al.Stiffness Fractal Model for Fixed Joint Interfaces[J]. Transactions of the Chinese Society for Agricultural Machinery, 2013, 44(2): 255-260.
[19]李玲,蔡安江,蔡力钢,等. 栓接结合部动态特性辨识方法[J]. 机械工程学报,2013,49(7):168-175.
Li Ling, Cai Anjiang, Cai Ligang, et al.Identification Method for Dynamic Properties of Bolted Joints[J], Chinese Journal of Mechanical Engineering, 2013, 49(7): 168-175.
[20]Celic D, Boltear M. Identification of the Dynamic Properties of Joints Using Frequency-response Functions[J]. Journal of Sound and Vibration, 2008, 317(1/2): 158-174. |