[1]李国龙, 李先广, 刘飞, 等. 拓扑修形齿轮附加径向运动成形磨削中的砂轮廓形优化方法[J]. 机械工程学报, 2011, 47(11): 155-162.
Li Guolong, Li Xianguang, Liu Fei, et al. Method of Profile Optimization of a Form Grinding Wheel for Grinding with Additional Radial Motion of Topologically Modified Gear[J].Journal of Mechanical Engineering, 2011, 47(11): 155-162.
[2]Artoni A, Kolivand M, Kahraman A. An Ease-off Based Optimization of the Loaded Transmission Error of Hypoid Gears[J]. Journal of Mechanical Design, 2010,132(1):71-79.
[3]Shih Yi-Pei.A Novel Ease-off Flank Modification Methodology for Spiral Bevel and Hypoid Gears[J].Mechanism and Machine Theory, 2010,45(8): 1108-1124.
[4]Litvin F L, Tsay Chung-Biau. Helical Gears with Circular Arc Teeth: Simulation of Conditions of Meshing and Bearing Contact[J]. Journal of Mechanisms, Transmissions and Automation in Design, 1985, 107(3):557-564.
[5]Litvin F L, Lu J.Computerized Design and Generation of Double Circular-arc Helical Gears with Low Transmission Errors[J]. Computer Methods in Applied Mechanics and Engineering, 1995,127(4):57-86.
[6]Costopoulos T, Spitas V. Reduction of Gear Fillet Stresses by Using One-sided Involute Asymmetric Teeth[J]. Mechanism and Machine Theory,2009,44(8):1524-1534.
[7]Karpat F, Ekwaro-Osire S, Cavdar K, et al. Dynamic Analysis of Involute Spur Gears with Asymmetric Teeth[J]. International Journal of Mechanical Sciences,2008,50(12): 1598-1610.
[8]Alipiev O. Geometric Design of Involute Spur Gear Drives with Symmetric and Asymmetric Teeth Using the Realized Potential Method[J]. Mechanism and Machine Theory, 2011, 46(1): 10-32.
[9]Komori T, Nagata S. A New Gears Profile Having Zero Relative Curvature at Many Contact Points[J]. Journal of Mechanical Design,1990, 112(3):430-436.
[10]Feng Xianying, Wang Aiqun, Lee Linda.Study on the Design Principle of the Logix Gear Tooth Profile and the Selection of Its Inherent Basic Parameters[J].The International Journal of Advanced Manufacturing Technology,2004, 24(11): 789-793.
[11]Luo Qihan, Li Haixiang, Wang Junrong,et al.Transmission of Point-line Meshing Gear[J].The International Journal of Advanced Manufacturing Technology, 2007, 33(10):845-855.
[12]罗齐汉, 厉海祥, 张予川,等. 点线啮合齿轮参数选择的封闭图[J].机械工程学报, 2005, 41(1): 37-45.
Luo Qihan, Li Haixiang, Zhang Yuchuan.Closed Picture of Point-line Parameter Selection[J]. Chinese Journal of Mechanical Engineering, 2005, 41(1): 37-45.
[13]Arafa H A. C-gears: Geometry and Machining[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2005, 219 (7): 709-726.
[14]戴玉堂,有贺幸则,姜德生.圆弧齿线圆柱齿轮的数控滚切机理与试验研究[J].中国机械工程, 2006,17(7): 706-709.
Dai Yutang, Ariga Yukinori, Jiang Desheng.Hobbing Mechanism of Cylindrical Gear with Arcurate Tooth Traces and Experimental Investigation[J]. China Mechanical Engineering, 2006,17(7): 706-709.
[15]潘存云. 球齿轮传动原理与加工方法研究[D]. 长沙: 国防科技大学, 2002.
[16]Yang S C. Mathematical Model of a Ring-involute-teeth Spherical Gear with a Double Degree of Freedom[J]. Journal of Advanced Manufacturing Technology,2002,20(12): 865-870.
[17]潘存云,温熙森.渐开线环形齿球齿轮传动原理与运动分析[J].机械工程学报,2005,41(5):1-9.
Pan Cunyun, Wen Xisen. Research on Transmission Principle and Kinematics Analysis for Involute Spherical Gear[J]. Chinese Journal of Mechanical Engineering, 2005,41(5): 1-9.
[18]Li Ting, Pan Cunyun. On Grinding Manufacture Technique and Tooth Contact and Stress Analysis of Ring-involute Spherical Gears[J]. Mechanism and Machine Theory, 2009,44(10):1807-1825.
[19]刘雷,黄因慧,田宗军,等.一种凹、凸环面渐开线齿轮及其设计、加工方法:中国,201210081587.4[P].2012-07-18. |