[1]Kurt E, Heinz H,Stan J,et al.An Analysis of Twin-screw Extruder Mechanisms[J]. Advances in Plastics Technology, 1981(4): 18-39.
[2]Yerramilli L, Karwe V. Velocity Distributions and Mixing in the Translational Region of a Kneading Section in a Co-rotating Twin-screw Extruder[J]. Food and Bio Products Processing,2004, 82(C1): 5-12.
[3]Booy M L. Geometry of Fully Wiped Twin-screw Equipment[J].Polymer Engineering & Science, 1978, 18(12): 973-984.
[4]Booy M L. Isothermal Flow of Viscous Liquids in Corotating Twin Screw Devices[J]. Polymer Engineering & Science, 1980, 20(18):1120-1128.
[5]刘慧. 同向啮合双螺杆挤出机几何学的研究[J].河北轻化工学院学报,1997,18(3):24-28.
Liu Hui. Study on Geometry of Extrusion Press of Intermeshing Co-rotating Twin-screw[J]. Journal of Hebei Institute of Chemical Technology and Light Industry,1997,18(3):24-28.
[6]Rauwendaal C.The Geometry of Self-cleaning Twin-screw Extruders[J]. Advances in Polymer Technology, 1996, 15(2): 127-133.
[7]Carrot C, Guillet J, May J F,et al. Modeling of the Conveying of Solid Polymer in the Feeding Zone of Intermeshing Co-rotating Twin Screw Extruders[J].Polymer Engineering and Science, 1993, 33(11):700-708.
[8]Sobhanil H, Ghoreishy M,Razavi M. Modeling of Polymer Fluid Flow and Residence Time Distribution in Twin Screw Extruder Using Fictitious Domain Method[J]. Plastics, Rubber and Composites,2011, 40(8):387-396.
[9]Barrera M, Vega J, Martinezsalazar J. Three-dimensional Modelling of Flow Curves in Co-rotating Twin-screw Extruder Elements[J]. Journal of Materials Processing Technology, 2008,197(1/3):221-224.
[10]Dirk Z. Screw Design for Co-rotating Twin-screw Extruders[J]. Plastics Additives & Compounding, 2004(3/4):38-41.
[11]魏伟锋,张广鹏,杜真一,等.参数化直线共轭内啮合泵齿廓设计方法[J].机械工程学报,2014,50(3):49-55.
Wei Weifeng,Zhang Guangpeng,Du Zhenyi,et al.Design Method of Internal Rotary Gear Pump by Parameterized Line Conjugated Tooth Profile[J].Journal of Mechanical Engineering, 2014,50(3):49-55.
[12]卜迟武,唐庆菊. 同向啮合双螺杆侧间隙的研究[J]. 机械设计与制造,2009(4):130-132.
Bu Chiwu, Tang Qingju.The Analysis of the Side Gap of Nibbling Twin-screw Extruders[J]. Machinery Design & Manufacture, 2009(4):130-132. |