柴油机SCR瞬态参数采集处理与诊断系统

中国机械工程 ›› 2014, Vol. 25 ›› Issue (16): 2247-2252.

柴油机SCR瞬态参数采集处理与诊断系统

胡明江1;罗从双1;王忠2

1.河南城建学院,平顶山,467036
2.江苏大学,镇江,212013

出版日期:2014-08-26 发布日期:2014-09-11
基金资助:
国家自然科学基金资助项目(50376021,50776042）;河南省高等学校青年骨干教师资助项目（2010GGJS-150);河南省科技厅重点攻关计划项目(112102210363)

Transient Data Acquisition and Diagnosis System of SCR for Diesel Engine

Hu Mingjiang1;Luo Congshuang1;Wang Zhong2

1.Henan University of Urban Construction,Pingdingshan,Henan,467036
2.Jiangsu University,Zhenjiang,Jiangsu,212013

Online:2014-08-26 Published:2014-09-11
Supported by:
National Natural Science Foundation of China（No. 50376021,50776042）;Henan Provincial Key Technology R&D Program of Ministry of Science and Technology of China（No. 112102210363）

摘要/Abstract

摘要：

基于尿素SCR系统瞬态特性,开发了适合柴油机SCR瞬态参数的测试与诊断系统;采用DASYLab软件,编写了接口、标定与诊断程序，实现了SCR系统信号显示、存储与再现等功能；依据遍历跟踪与诊断程序，实现了对柴油机SCR系统瞬态特性参数的在线测试与诊断;依据柴油机瞬态测试循环法规,进行了柴油机SCR系统的NOx转化效率、尿素喷射量和NH3泄漏量等测试与诊断试验。结果表明:与标准的AVL测试系统(AVL CBE-Ⅱ气体排放分析与测试系统)相比,所研发的系统动态最大误差为2.05%,动态平均误差为0.82%,故障诊断精确率达到了98.6%,能满足柴油机SCR瞬态测试循环要求。

关键词: 柴油机, 选择催化还原, 尿素喷射, 瞬态特性, 在线诊断

Abstract:

Based on the transient characteristic of urea-SCR system, it was developed on the test and diagnostic system on transient parameters of SCR system for diesel engine. The programs on the interface, demarcate and diagnosis could be conveniently compiled by DASYLab software, it could be carried out on the measured and diagnostic functions by the tracking and diagnostic procedure, such as, the transient parameters were collected, storaged, diagnosed and displayed at the same time in SCR system. According to the cycle regulations of the diesel engine transient test, these measured and diagnostic tests were carried out on the NOx conversion efficiency, the amount of the urea dosing and the NH3 leakage of SCR system. The testing results show that compared with standard AVL testing system, the dynamic maximal error of the designed system is as 2.05%, the dynamic average error is as 0.82%, and the diagnostic accuracy rate can also reach 98.6%, which can meet the needs of the dynamic data acquisition and diagnosis of SCR system for diesel engine greatly.

Key words: diesel engine, selective catalytic reduction(SCR), urea dosing, transient characteristics, on-line diagnosis

中图分类号:

TK413.7

胡明江, 罗从双, 王忠. 柴油机SCR瞬态参数采集处理与诊断系统[J]. 中国机械工程, 2014, 25(16): 2247-2252.

Hu Mingjiang, Luo Congshuang, Wang Zhong. Transient Data Acquisition and Diagnosis System of SCR for Diesel Engine[J]. China Mechanical Engineering, 2014, 25(16): 2247-2252.

参考文献

[1]Colombo M,Nova I,Tronconi E,et al.A Modeling Study of NH3 Slip Catalysts:Analysis of the SCR/PGM Interactions[J]. Topics in Catalysis,2013,56(1/8):177-181.
[2]Lü L,Wang L.Model-based Optimization of Parameters for a Diesel Engine SCR System[J].International Journal of Automotive Technology,2013,14(1): 13-18.
[3]Ochs T,Schittenhelm H,Genssle A,et al.Particulate Matter Sensor for on Board Diagnostics(OBD) of Diesel Particulate Filters(DPF)[J]. SAE Paper,2010-01-0307.
[4]Zhang S M,Tian F,Ren G F,et al.SCR Control Strategy Based on ANNS and Fuzzy PID in a Heavy-duty Diesel Engine[J]. International Journal of Automotive Technology,2012,13(5):693-699.
[5]Wang Jin,Crocker M.N2O Mitigation in a Coupled LNT-SCR System[J].Catal. Lett.,2012,142(4):1167-1172.
[6]张伟,徐正飞,邓成林,等.柴油机SCR系统OBD功能的诊断策略研究[J].汽车工程,2011,33(1):23-25.
Zhang Wei,Xu Zhengfei,Deng Chenglin,et al.A Research on the Diagnostic Strategy of OBD Function for the SCR System of Diesel Engine[J].Automotive Engineering,2011,33(1):23-25.
[7]胡静,赵彦光,陈婷,等.重型柴油机SCR后处理系统尿素喷射电子控制单元开发[J].内燃机工程,2011,32(1):8-11.
Hu Jing,Zhao Yanguang,Chen Ting,et al.Development of Urea Dosing Control Unit for SCR After-Treatment System of Heavy Duty Diesel Engine[J].Chinese Internal Combustion Engine Engineering,2011,32(1):8-11.
[8]Nova I,Colombo M,Tronconi E,et al.Experimental and Modelling Study of a Dual-layer NH3 Slip Monolith Catalyst for Automotive SCR Aftertreatment Systems[J].Topics in Catalysis,2013,56(1/8):227-231.
[9]Frobert A,Raux S,Rousseau S,et al.Analysis of the Coupling of HC-SCR by Ethanol and NH3-SCR on Real Engine Emissions[J]. Topics in Catalysis,2013,56(1/8):125-129.
[10]Fogel S,Doronkin D E,Gabrielsson P,et al.Combination of Ag/Al2O3 and Fe-BEA for High-activity Catalyst System for H2-assisted NH3-SCR of NOx for Light-duty Diesel Car Applications[J].Topics in Catalysis,2013,56(1/8):14-18.
[11]Hallquist A M,Fridell E,Westerlund J,et al.Onboard Measurements of Nanoparticles from a SCR-Equipped Marine Diesel Engine[J]. Environ. Sci. Technol.,2013,47(2):773-780.
[12]Yoshihara Y,Suzuki T,Tominaga K,et al.Development of an On-board PM Sensor for the OBD System Based on an Electrochemical Polarization[J].SAE Paper,2011-01-2059.
[13]颜秉勇,王华忠.基于故障跟踪估计器的故障诊断新方法[J].系统工程与电子技术,2013,35(2):377-380.
Yan Bingyong,Wang Huazhong.Novel Fault Diagnosis Approach Based on Fault Tracking Approximator[J]. Systems Engineering and Electronics,2013,35(2):377-380.

[1]	李伟, 马凌凌, 施卫东, 季磊磊, 李恩达. 混流泵启动过程进口流动特性的数值模拟[J]. 中国机械工程, 2021, 32(06): 666-673,680.
[2]	江志农1;茆志伟1;王子嘉2;包彬彬3;张进杰2. 基于振动监测的应急柴油机启动性能分析方法[J]. 中国机械工程, 2019, 30(08): 912-918.
[3]	牛小强1;雷基林1;邓晰文1;文均2;温志高2. 活塞顶面热障涂层对活塞热负荷的影响[J]. 中国机械工程, 2018, 29(12): 1499-1506.
[4]	赵昌普;孙雅坤;王耀辉;张志刚;朱亚永. 船用柴油机燃烧室结构分析[J]. 中国机械工程, 2017, 28(18): 2176-2182.
[5]	郝靖;何邦全;金超. 柴油机燃烧室匹配参数对撞壁喷雾特性的影响[J]. 中国机械工程, 2017, 28(13): 1554-1560.
[6]	潘锁柱, 彭义增, 韩伟强, 韩志强, 田维, 尹胧. 柴油机进气门晚关系统关键参数对进气性能的影响研究[J]. 中国机械工程, 2015, 26(24): 3312-3317.
[7]	温占永;杨雨田;战强;苏万华. 增压式喷油器设计参数对换向阀性能影响研究[J]. 中国机械工程, 2014, 25(3): 304-310.
[8]	杨红艳, 崔昭霞. 节流调速液压系统动态特性研究[J]. 中国机械工程, 2014, 25(20): 2724-2728,2739.
[9]	杨易;徐永康;聂云;范光辉;伍奕桦. 非定常来流对汽车气动升力瞬态特性的影响[J]. 中国机械工程, 2014, 25(12): 1681-1686.
[10]	许翔;刘瑞林;董素荣;刘刚. 车用柴油机高原性能模拟试验及性能提升策略[J]. 中国机械工程, 2013, 24(17): 2403-2407.
[11]	严新平1, 李志雄1, 张月雷2, 袁成清1, 彭中笑3. 船舶柴油机摩擦磨损监测与故障诊断关键技术研究进展[J]. 中国机械工程, 2013, 24(10): 1413-1419.
[12]	李爱娟1, 李舜酩1, 郭新民2, 刘刚3, 刘建娅4. 柴油机冷EGR温度控制器的研究 [J]. 中国机械工程, 2012, 23(4): 407-411.
[13]	庄继晖, 谢, 辉, 李苏苏, 朱仲文. 基于ASAP架构的发动机ECU标定系统开发 [J]. 中国机械工程, 2012, 23(2): 199-203.
[14]	郑伟1, 2, 张振东1. 射流条件下采用纳米流冷却液对柴油机缸盖冷却的研究[J]. 中国机械工程, 2012, 23(15): 1802-1807.
[15]	陈如娟, 陈超, 宋小刚. 微小旋转型超声电机瞬态特性测试及机械特性估计方法 [J]. 中国机械工程, 2011, 22(11): 1284-1288.