全液压矫直机阀控缸系统的建模及实验分析

中国机械工程 ›› 2014, Vol. 25 ›› Issue (10): 1299-1303.

全液压矫直机阀控缸系统的建模及实验分析

张华君;黄庆学

太原科技大学山西省冶金设备设计理论与技术重点实验室重型机械教育部工程研究中心,太原,030024

出版日期:2014-05-25 发布日期:2014-05-27
基金资助:
国家重点基础研究发展计划（973计划）前期项目(2011CB612204)

Modeling and Experimental Analysis of Valve-control-cylinder System for Full-hydraulic Leveler

Zhang Huajun;Huang Qingxue

Shanxi Provincial Key Laboratory of Metallurgical Equipment Design and Technology,State Key Laboratory Cultivation Base of Province-ministry Co-construct,Taiyuan University of Science and Technology,Taiyuan,030024

Online:2014-05-25 Published:2014-05-27
Supported by:
National Program on Key Basic Research Project (973 Program)（No. 2011CB612204）

摘要/Abstract

摘要：

为了使全液压矫直机的液压伺服系统控制更精确、系统更稳定,从工程实际出发,以阀芯控制电压为输入信号，液压缸位移为输出信号，建立了基于高频响非对称比例伺服阀控制非对称缸的数学模型，并且通过仿真分析和实验室应用,验证了该系统模型的正确性。

关键词: 高频响非对称比例伺服阀, 非对称缸, 负载压力, 负载流量, 综合泄漏系数

Abstract:

For a more accurate and more stable hydraulic servo system of the full-hydraulicleveler, from engineering reality that the spool control voltage was as an input signal and the cylinder displacement was as an output signal, a mathematical model was established herein based on high frequency response asymmetrical proportional servo valve controlling asymmetrical cylinder. The model was proved by simulation analysis and applications in the laboratory.

Key words: high frequency response asymmetrical proportional servo valve, asymmetrical cylinder, load pressure, load flow, complex leakage coefficient

中图分类号:

TH31

张华君, 黄庆学. 全液压矫直机阀控缸系统的建模及实验分析[J]. 中国机械工程, 2014, 25(10): 1299-1303.

Zhang Huajun, Huang Qingxue. Modeling and Experimental Analysis of Valve-control-cylinder System for Full-hydraulic Leveler[J]. China Mechanical Engineering, 2014, 25(10): 1299-1303.

参考文献

[1]周存龙,徐静,王国栋,等.中厚板热矫直机压下模型[J].钢铁研究学报,2006,18（8）:28-31.
Zhou Cunlong, Xu Jing, Wang Guodong, Liu Xianghua, Intermesh Model of Hot Roller Leveler for Plate Steel[J].Journal of Iron and Steel Research,2006,18(8):28-31.
[2]管东方,黄效国,牛巍.矫直机液压压下装置伺服系统的建模与仿真[J].液压与气动,2005(3):4-5.
Guan Dongfang,Huang Xiaoguo,Niu Wei.Simulation and Modeling of Hydraulic Screwdown Cylinder’ Control System of Leveller[J]. Chinese Hydraulic & Pneumatics,2005(3):4-5.
[3]张业建,李洪人.阀控非对称缸电液伺服系统控制策略研究[J].中国机械工程,1999,10（10）：1172-1175.
Zhang Yejian,Li Hongren.Study on Control Strategy for an Electrohydraulic Servo System with Valve Controlled Asymmetric Cylinder[J].China Mechanical Engineering,1999,10（10):1172-1175.
[4]王栋梁，李洪人，李春萍.非对称阀控制非对称缸系统的静态及动态特性分析[J].机床与液压,2003(1):198-200.
Wang Dongliang,Li Hongren,Li Chunping.Analysis of Static and Dynamic Propertics of Asymmetrical Valve Controlled Asymmetrical Cylinder[J].Machine Tool & Hydrauloics,2003(1):198-200.
[5]明廷涛,张永祥,张西勇,等.基于非线性观测器的液压伺服系统故障诊断方法研究[J].中国机械工程,2008,19(13):1527-1530.
Ming Tingtao,Zhang Yongxiang, Zhang Xiyong,et al.Nonlinear Observer-based Fault Diagnosis for Hydraulic Servo Systems[J]. China Mechanical Engineering,2008,19(13):1527-1530.
[6]张秀玲.液压弯辊系统的优化神经网络内模控制[J].中国机械工程,2007,18(20):2419-2421.
Zhang Xiuling.Optimal Neural Network Internal Model Control for Hydraulic Bending Roll System[J].China Mechanical Engineering, 2007,18(20):2419-2421.
[7]Yu Hong,Feng Zhengjin,Wang Xuyong.Nonlinear Control for a Class of Hydraulic Servo System[J].Journal of Zhejiang University,2004,5(11):1413-1417.
[8]Huang S N,Tan K K,Lee T H.Further Results on Adaptive Control for a Class of Nonlinear System Using Neural Networks[J]. IEEE Transactions on Neural Networks,2003,14(3):719-722.