纳米液对瓷砖表面光洁度影响的实验研究

中国机械工程 ›› 2013, Vol. 24 ›› Issue (3): 331-335.

纳米液对瓷砖表面光洁度影响的实验研究

邵俊鹏;徐斌

哈尔滨理工大学,哈尔滨,150080

出版日期:2013-02-10 发布日期:2013-02-27
基金资助:
高等学校博士学科点专项科研基金资助项目（20050214001）
Research Fund for the Doctoral Program of Higher Education of China（No. 20050214001）

#br# Experimental Study on Effect of Nanodroplets on Surface Glossiness of Ceramics Tile

Shao Junpeng;Xu Bin

Harbin University of Science and Technology, Harbin, 150080

Online:2013-02-10 Published:2013-02-27
Supported by:

Research Fund for the Doctoral Program of Higher Education of China
（No. 20050214001）

摘要/Abstract

摘要：

为了研究瓷砖表面质量,分析瓷砖涂覆制膜机的结构和运行原理,提出了纳米液涂覆瓷砖机理。一系列未涂覆纳米液和涂覆纳米液瓷砖SEM对比实验表明,涂覆纳米液瓷砖表面光洁度优于未涂覆纳米液瓷砖,涂覆纳米液瓷砖的裂纹、凹坑被纳米液填充并固化成膜。实验结果表明,涂覆纳米液瓷砖不易附着污渍,有显著的防护作用。


关键词: 涂覆制膜机, 磨头, 纳米液, 瓷砖

Abstract:

In order to investigate the surface quality of ceramics tile. structure and principle of film coating machine were analyzed. The mechanism of nanodroplets coating ceramics tile was derived. A series of comparative SEM experiments with no coating nanodroplets ceramics tile and coating nanodroplets ceramics tile were performed, the surface glossiness of coating nanodroplets ceramics tile is better than that no coating nanodroplets ceramics tile. Cracks and concave pit after refilling nanodroplets are formed the film. It is concluded that stains can be removed on the surface of coating nanodroplets ceramics tile, by a series of cleaning the stain experiments of ceramic tiles. the ability of protection is very effective.

Key words: film coating machine, grinding head;nanodroplets;ceramics tile

中图分类号:

TH17

邵俊鹏, 徐斌. 纳米液对瓷砖表面光洁度影响的实验研究[J]. 中国机械工程, 2013, 24(3): 331-335.

SHAO Dun-Feng, XU Bin. #br# Experimental Study on Effect of Nanodroplets on Surface Glossiness of Ceramics Tile[J]. China Mechanical Engineering, 2013, 24(3): 331-335.

参考文献

[1]Campos L F A, Menezes R R, Lisboa D，et al. Experimental Design To Maximize the Waste Content in Ceramic Bricks and Tiles[J]. Cermica, 2007,328（53）:373-380.
[2]El-Fadaly E, Bakr I M, Abo Breka M R. Recycling of Ceramic Industry Wastes in Floor Tiles Recipes[J]. Journal of American Science,2010,6(10):241-247.
[3]Atiqur Rahaman G M,Mobarak Hossain M. Automatic Defect Detection and Classification Technique from Image: a Special Case Using Ceramic Tiles[J]. International Journal of Computer Science and Information Security,2009,1（1）：22-30.
[4]Keser T,Hocenskil , Hocenski V. Intelligent Machine Vision System for Automated Quality Control in Ceramic Tiles Industry[J]. Strojarstvo,2010,52(2): 105-114.
[5]Sidjanin L, Rajnovic D, Ranogajec J,et al.Measurement of Vickers Hardness on Ceramic Floor Tiles[J]. Journal of the European Ceramic Society , 2007,27(2/3):1767-1773.
[6]Costa C E, Petrou M. Automatic Registration of Ceramic Tiles for the Purpose of Fault Detection[J]. Machine Vision and Applications, 2000,11(5): 225-230.
[7]袁慧，魏昕，王成勇.瓷质玻化砖磨抛加工工艺研究[J].金刚石与磨料磨具工程，1998, 106(4):23-27.
Yuan Hui,Wei Xin,Wang Chengyong. Research on the Grinding and Polishing of Wollastonic[J]. Diamond & Abrasives Engineering, 1998,106(4):23-27.
[8]王成勇，袁慧，魏昕.瓷质玻化砖磨抛加工磨具及加工工艺研究[J].金刚石与磨料磨具工程，1999,110(2):23-31.
Wang Chengyong, Yuan Hui,Wei Xin,et al. Abrasive Wheels and Grinding Technique for Grinding Vitreous Ceramic Tile[J]. Diamond & Abrasives engineering, 1999,110(2):23-31.
[9]袁慧，王成勇，魏昕.瓷质玻化砖磨削机理研究[J].中国机械工程，1998,9(8):9-11.
Yuan Hui,Wang Chengyong,Wei Xin. Grinding Mechanism of Vitreous Ceramic Tiles[J]. China Mechanical Engineering, 1998,9(8): 9-11.
[10]公方杰.瓷质砖裂纹缺陷分析[J].中国陶瓷工业，1999,6(2):43-45.
Gong Fangjie. Analysis on the Vitreous Tile Cracks[J].China Ceramics Industry, 1999,6(2):43-45.
[11]刘平，向学军.瓷砖表面平整度检测系统设计[J].陶瓷，2007(1):48-50.
Liu Ping,Xiang Xuejun. Design of Flatness Measuring System for Ceramic Tiles[J].Ceramics,2007(1):48-50.
[12]李宣营.抛光砖抛后变形的预防措施[J].佛山陶瓷，2005,15(4):11-13.
Li Xuanying. Prevention of Deformation of Ceramic Tile in Polishing Process[J].Fo Shan Ceramics, 2005,15(4):11-13.
[13]袁慧，成云平，王成勇,等.陶瓷抛光砖磨削锯切多功能组合加工机床[J].中国陶瓷，2007,43(3):42-45.
Yuan Hui, Cheng Yunping, Wang Chengyong. Multifunctional Combined Machine Tool of Ceramic Tile Grinding and Sawing[J].China Ceramics, 2007,43(3):42-45.
[14]李松，郑超.抛光砖面磨抛均匀性浅析[J].陶瓷，2005(7)：19-22.
Li Song, Zhang Chao. Study on Homogeneity of the Surface of Polished Tiles[J]. Ceramics, 2005(7):19-22.
[15]陈丽芬,吴运新,周鹏,等.功率谱分析在抛光机磨头故障诊断中的应用[J].机械工程师,2006,15（2）：119-121.
Chen Lifen,Wu Yunxin, Zhou Peng, et al. Application of Spectrum Analysis in Grinding Head of Polisher[J]. Mechanical Engineer, 2006,15(2):119-121.
[16]程洪涛,尹小定,薛丽,等.陶瓷抛光机磨头主轴的模态分析[J].佛山陶瓷,2008,18（11）:26-28.
Cheng Hongtao, YinXiaoding, Xue Li, et al. Modal Analysis of Grinding Head Mainshaft of Ceramic Polishing Machine[J].FoShan Ceramics, 2008,18(11):26-28.
[17]陈就.抛光机磨头驱动部件的动态特性分析[J].佛山陶瓷,2002,12（6）:24-26.
Chen Jiu. Properties of Driving Part in Polishing Machine Grinder[J]. FoShan Ceramics, 2002,12(6):24-26.
[18]聂陶荪,冯浩.抛光机磨头主轴动力分析[J].中国陶瓷工业,2000,7（3）:16-18.
Nie Taosun, Feng Hao. The Dynamic Analysis of the Primary Shaft of the Polisher GrindingWheel[J]. China Ceramic Industry, 2000,7(3):16-18.
[19]朱洪涛. 精密磨料水射流加工硬脆材料冲蚀机理及抛光技术研究[D].济南：山东大学,2007.
[20]张兰娣.工程陶瓷的精密铣削机理与实验研究[D].天津：河北工业大学,2002.
[21]冯衍霞.磨料水射流铣削陶瓷材料加工技术研究[D].济南：山东大学,2007.
[22]赵晓亮. 陶瓷磨削表面粗糙度预测模型与实验研究[D].大连：大连理工大学,2009.