[1]Yang He, Li Heng, Zhang Zhiyong, et al. Advances and Trends on Tube Bending Forming Technologies[J]. Chinese Journal of Aeronautics, 2012, 25: 1-12.
[2]Zhan Mei, Yang He, Jiang Zhiqiang. State of the Art of Research on Tube Bending Process[J]. Mechanical Science and Technology, 2004, 23(12): 1509-1514.
[3]Yang He, Sun Zhichao, Lin Yan, et al. Advanced Plastic Processing Technology and Research Progress on Tube Forming[J]. Journal of Plasticity Engineering, 2001, 8(2): 83-85.
[4]Hermes M, Chatti S, Weinrich A, et al. Three-dimensional Bending of Profiles with Stress Super-position[J]. International Journal of Material Forming, 2008, 1(S1): 133-136.
[5]李雁鹏, 吴建军. 非平面弯管成形过程的回弹补偿研究[J]. 锻压技术, 2009, 34(1): 89-92.
[6]Gantner P, Herbert B, Harrison D I K, et al. Free-Bending-A New Bending Technique in the Hydro forming Process Chain[J]. Journal of Materials Processing Technology, 2005, 167: 302-308.
[7]Chatti S, Hermes M, Tekkaya A E, et al. The New TSS Bending Process: 3D Bending of Profiles with Arbitrary Cross sections[J]. CIRP Annals-Manufacturing Technology, 2010, 59(1): 315-318.
[8]李恒. 多模具约束下薄壁管数控弯曲成形过程失稳起皱行为研究[D]. 西安: 西北工业大学, 2007.
[9]寇永乐, 杨合, 詹梅, 等. 薄壁管数控弯曲应变的网格法研究[J]. 中国机械工程, 2006, 17(S1).
[10]Zhang Shen, Wu Jianjun. Spring back Prediction of Non-planar Tube Bending[J]. Acta Aeronautica et Astronautica Siniea, 2011, 32(5): 953-960.
[11]A1-Qureshi H A. Elastic-plastic Analysis of Tube Bending[J]. International Journal of Machine Tools Manufacture, 1999, 39(1): 87-104.
[12]A1-Qureshi H A, Russo A. Spring-back and Residual Stresses in Bending of Thin-walled Aluminum Tubes[J]. Materials and Design, 2002, 23(2): 217-222.
[13]Wang Shengjun, Fu Ling, Kang Yan, et al. Automatic Centerline Extraction Based on Tubular Feature for Coronary Arteries[J]. Journal of Northeastern University(Natural Science), 2011, 32(1): 27-31.
[14]Xu Yan, Hu Guangshu, Shang Lihua, et al. Adaptive Tracking Extraction of Vessel Center-lines in Coronary Arteriograms Using Hessian Matrix[J]. J. Tsinghua Univ. (Sci. Tech. ), 2007, 47(6): 889-892.
[15]李颖超, 刘越, 王涌天. 基于多尺度Hessian矩阵和Gabor滤波的造影图像冠脉中心线提取[J]. 中国医学影像技术, 2007, 23(1): 133-136.
[16]Wang Xiaolin, Zhou Xianbin. Springback Analysis of Varied Curvature Elastic-plastic Bending for Sheet Metal[J]. Journal of Plasticity Engineering, 1996, 3(4): 27-33. |