[1]杨嘉林. 汽车发动机研制的新动向——缸内直喷式汽油机[J]. 中国机械工程, 1997, 8(1): 9-11.
[2]Zhao F, Lai M C, Harrington D L. Automotive Spark-ignited Direct-injection Gasoline Engines[J]. Progress in Energy and Combustion Science 1999, 25: 437-562.
[3]黄佐华, 蒋德明. 影响火花点火发动机碳氢排放因素的研究[J]. 中国机械工程, 1997, 8(1): 48-51.
[4]Horie K, Takahashi H, Akazaki S. Emission Reduction During Warm-up Period by Incorporating a Wall-wetting Fuel Model on the Fuel Model on the Fuel Injection Strategy during Engine Starting[J]. SAE Paper, 952478,1995.
[5]Lee S, McGee J, Quay B, et al. A Comparison of Fuel Distribution and Combustion during Engine Cold Start for Direct and Port-fuel Injection Systems[J]. SAE Paper, 1999-01-1490, 1999.
[6]Lee S, Tong K, Quay B, et al. Effects of Swirl and Tumble on Mixture Preparation during Cold Start of a Gasoline Direct-injection Engine[J]. SAE Paper, 2000-01-1900, 2000.
[7]Yamada T, Gardner D, Bruno B, et al. The Effects of Engine Speed and Injection Pressure Transients on Gasoline Direct Injection Engine Cold Start[J]. SAE Paper, 2002-01-2745, 2002.
[8]Landenfeld T, Kufferath A, Gerhardt J. Gasoline Direct Injection - SULEV Emission Concept [J]. SAE Paper, 2004-01-0041, 2004.
[9]Xu Z, Yi J, Wooldridge S, et al. Modeling the Cold Start of the Ford 3. 5L V6 EcoBoost Engine[J]. SAE Paper, 2009-01-1493, 2009.
[10]雷卫, 苏万华. 一种新的HCCI柴油机燃油喷雾特性的PLIF法测试装置[J]. 汽车工程, 2004, 26(4): 405-408.
[11]Whitaker P, Shen Y, Fuch H, et al. Development of the Combustion System for a Flexible Fuel Turbocharged Direct Injection Engine[J]. SAE Paper, 2010-01-0585, 2010.
|