新型锯丝的弹塑性冷绕成形与回弹研究

中国机械工程 ›› 2013, Vol. 24 ›› Issue (20): 2809-2814，2819.

新型锯丝的弹塑性冷绕成形与回弹研究

姚春燕;陈思源;彭伟

浙江工业大学特种装备制造与先进加工技术教育部重点实验室，杭州，310032

出版日期:2013-10-25 发布日期:2013-10-25
基金资助:
国家自然科学基金资助项目（51075367）；浙江省自然科学基金资助项目（Y1090931）
National Natural Science Foundation of China（No. 51075367）;
Zhejiang Provincial Natural Science Foundation of China（No. Y1090931）

Study on Elastoplastic and Resilient of a New Sawing Wire Cold Coiling

Yao Chunyan;Chen Siyuan;Peng Wei

Key Laboratory of Special Purpose Equipment and Advanced Processing Technology,Ministry of Education,Zhejiang University of Technology, Hangzhou,310032

Online:2013-10-25 Published:2013-10-25
Supported by:

National Natural Science Foundation of China（No. 51075367）;
Zhejiang Provincial Natural Science Foundation of China（No. Y1090931）

摘要/Abstract

摘要：

为提高新型锯丝冷绕成形的精度，对内外线径的关系进行了研究。通过分析锯丝成形时所受载荷及弹塑性变形，建立了拉伸弯曲组合的力学模型，从而得出了轴向力影响下弯矩与弯曲半径之间的数学关系。利用纯弯下的M-k曲线，采用用特征点切线表征塑性段曲线的方法确定了回弹弯矩和回弹曲率，推导出了内外线径的理论计算公式，并以锯丝的冷绕成形实验验证了公式的可靠性。从材料和工艺方面提出了回弹控制措施，对新型锯丝的生产具有一定的指导意义。

关键词: 锯丝, 弹塑性, 冷绕成形, 回弹

Abstract:

In order to improve the formation precision of a new sawing wire, the relevance to diameter of interior wire and exterior wire was studied. And the loads and elastoplastic deformation during cold coiling were analyzed to set up the mechanical model of stretch-bending deformation to obtain the mathematical relation between moment and coiling radius under axial force. Then the resilient moment and resilient curvature were determined by constructing the tangents of the feature points which can characterize the plastic curve in the pure bending M-k curve. After the formulas for calculating the diameter of interior and exterior ones being deduced, the reliability of the applied formulas were verified by a cold coiling experiment and relevant measures on materials and processes to control resilience were put forward. It is helpful to the practical sawing wire production.

Key words: sawing wire, elastoplasticity, cold coiling, resilience

中图分类号:

TG386.3

姚春燕;陈思源;彭伟. 新型锯丝的弹塑性冷绕成形与回弹研究[J]. 中国机械工程, 2013, 24(20): 2809-2814，2819.

Yao Chunyan;Chen Siyuan;Peng Wei. Study on Elastoplastic and Resilient of a New Sawing Wire Cold Coiling[J]. China Mechanical Engineering, 2013, 24(20): 2809-2814，2819.

参考文献

[1]彭伟[1],王金生[1],姚春燕[1].亚固结线锯切割实验研究[J].中国机械工程,2013,24(9):1225-1228.
[2]臧顺来[1],郭成[1].基于非线性弹性卸载的L形弯曲成形回弹研究[J].中国机械工程,2006(S1).
[3]陈英杰.梁和薄板的回弹变分原理研究与应用[D].燕山大学,2005:
[4]蔡中义,李明哲,李湘吉.板材成形回弹数值分析的静力隐式方法[J].中国机械工程,2002,13(17):1458-1461.
[5]雷松[1],王时龙[1],冯治恒[1],萧红[1],李小勇[1].螺旋弹簧冷绕成形与回弹的数值分析[J].计算机工程与应用,2011,47(27):228-232.
[6]刘婧瑶[1],唐承统[1],宁汝新[1].薄壁管纯弯曲塑性成形分析及回弹计算[J].塑性工程学报,2009,16(2):5-9.
[7]李建[1],赵军[1],展培培[1],孙红磊[1],马瑞[1].板料自由弯曲成形及回弹理论解析[J].塑性工程学报,2009,16(4):1-6.
[8]余同希,章亮炽著.塑性弯曲理论及其应用[M],1992:430.
[9]Huang M,Gerdeen J C. Springback of DoubleCurved Developable Sheet Metal Surface—an Over-view[J]. SAE Paper,940938,1994.
[10]Hyunok K’Ninad M,Taylan A. Prediction OfbendAllowance and Springback in Air Bending [J].Journal of Manufacturing Science and Engineering,2007,129:342-351.
[11]Bibel G D. Richer T P. Reduction of Springbackand Residual Stresses during Winding of a HelicalSpring [J ]. Journal of Engineering for Industry,1991,113(2):214-217.
[12]孔灿.正畸不锈钢弓丝弯曲成型与回弹的有限元数值模拟研究[D].东南大学,2009:
[13]Tang N C. Plastici—deformation Analysis in TubeBending[J]. International Journal of Pressure Ves-sels and Piping,2000,77:751-759.
[14]张立玲.管材塑性弯曲回弹量计算[J].锻压技术,2002,27(3):37-39.
[15]刘志刚,李祖光.弯管回弹问题探讨研究[J].电站系统工程,1999,15(3):60-64.
[16]王国周,瞿履谦.钢结构:原理与设计[M].北京:清华大学出版社,1993.
[17]陈明祥.弹塑性力学[M].北京:科学出版社,2007. 5
[18]范志明.弯曲回弹的减少与消除[J].现代机械,2003(5):36-37.
[19]吴建军[1],张贺刚[1],王俊彪[1],王永军[1].等边角型材带侧压型材拉弯的力学与回弹分析[J].中国机械工程,2006,17(5):542-544.