一种旋转式液固两相流冲蚀磨损试验装置的研制

中国机械工程 ›› 2013, Vol. 24 ›› Issue (13): 1705-1709.

一种旋转式液固两相流冲蚀磨损试验装置的研制

偶国富;叶健;章利特;饶杰;金浩哲

浙江理工大学，杭州，310018

出版日期:2013-07-10 发布日期:2013-07-11
基金资助:
国家高技术研究发展计划(863计划)资助项目(2009AA04Z42)；浙江省重点科技创新团队项目（2010R50001，2011R09011-07）
National High-tech R&D Program of China (863 Program) （No. 2009AA04Z42）

Development of a Rotary Test Apparatus for Liquid-solid Two Phase Flow Erosion Wear

Ou Goufu;Ye Jian;Zhang Lite;Rao Jie;Jin Haozhe

Zhejiang Sci-Tech University，Hangzhou，310018

Online:2013-07-10 Published:2013-07-11
Supported by:

National High-tech R&D Program of China (863 Program) （No. 2009AA04Z42）

摘要/Abstract

摘要：

针对目前液固两相流冲蚀磨损试验装置存在实际冲角误差大、浆体浓度不均匀等问题，研制了一种旋转式冲蚀磨损试验装置。该装置允许的冲角范围为0°~90°，冲击速度为0~28.5m/s连续可调，利用搅拌叶片和导流槽实现不同冲击速度下浆体浓度的均匀性，具有速度稳定、可同时测试8个不同冲角下的试样、操作方便等特点。对低碳钢在不同冲击速度和冲角下的试验表明，所测得试验数据误差在6.8%以内，冲蚀磨损规律与经典结论一致。因此，该装置有望作为一种准确可靠的冲蚀磨损试验研究新平台而应用于耐冲蚀磨损优化设计和寿命预测等领域。

关键词: 液固两相流, 冲蚀磨损, 试验装置, 冲角, 冲击速度, 浆体浓度

Abstract:

A rotary test apparatus was developed herein, which was used for liquid-solid two phase flow erosion wear testing. The apparatus had significant advantages over commonly used rotary test apparatus: impact angle could be permitted within rang of 0°~90°, and uniform slurry density was obtained in different impact velocities, which used mixing blades and diversion trenches. In addition, the apparatus is simple in operation and provides continuous adjustable impact velocity between 0~28.5m/s, it meets that 8 specimens can be tested in different impact angles simultaneously. The errors of test data were within 6.8% obtained by experiments of mild steel in different impact velocities and angles, the relation between erosion rate and influence parameters is in line with classical conclusions. This test apparatus has promising applications in optimization design and lifetime prediction for equipment eroded by slurry erosion.

Key words: liquid-solid two phase flow, erosion wear, test apparatus, impact angle, impact velocity, slurry concentration

中图分类号:

TG115.58

偶国富, 叶健, 章利特, 饶杰, 金浩哲. 一种旋转式液固两相流冲蚀磨损试验装置的研制[J]. 中国机械工程, 2013, 24(13): 1705-1709.

OU Guo-Fu, XIE Jian, ZHANG Li-Te, RAO Jie, JIN Gao-Zhe. Development of a Rotary Test Apparatus for Liquid-solid Two Phase Flow Erosion Wear[J]. China Mechanical Engineering, 2013, 24(13): 1705-1709.

参考文献

[1]Gnanavelu A，Kapur N，Neville A，et al．An Integrated Methodology for Predicting Material Wear Rates Due to Erosion[J]．Wear，2009，267(11)：1935-1944．
[2]刘娟，许洪元，齐龙浩．水力机械中冲蚀磨损规律及抗磨措施研究进展[J]．水力发电学报，2005，24(1)：113-117．
Liu Juan，Xu Hongyuan，Qi Longhao．The Development of Study on the Abrasive Rules and Anti-abrasive Technique of Hydraulic Machines[J].Journal of Hydroelectric Engineering，2005，24(1)：113-117．
[3]Hamed A，Tabakoff W，Wenglarz R．Erosion and Deposition in Turbomachinery[J]．Journal of Propulsion and Power，2006，22(2)：350-360．
[4]Suckling M，Allen C．The Design of an Apparatus to Test Wear of Boiler Tubes[J]．Wear，1995，186/187(1)：266-272．
[5]Postlethwaite J，Holdner D N．Wall Mass Transfer in Horizontal Slurry Pipelines[J]．The Canadian Journal of Chemical Engineering，1975，53(1)：31-35．
[6]Zu J B，Hutchings I M，Burstein G T．Design of a Slurry Erosion Test Rig[J].Wear，1990，140(2)：331-344．
[7]Gnanavelu A，Kapur N，Neville A，et al．A Numerical Investigation of a Geometry Independent Integrated Method to Predict Erosion Rates in Slurry Erosion[J]．Wear，2011，271(5/6)：712-719．
[8]张玉萍，周永欣，吕振林，等．射流式冲蚀磨损试验机的研制[J]．铸造设备研究，2006(4)：9-11．
Zhang Yuping，Zhou Yongxin，Lü Zhenlin，et al．Design and Manufacture of Multi-function Slurry Test Rig[J]．Research Studies on Foundry Equipment，2006(4)：9-11．
[9]Desale G R，Gandhi B K，Jain S C．Development of Correlations for Predicting the Slurry Erosion of Ductile Materials[J]．Journal of Tribology，2011，133 (3)：031603(1-10)．
[10]Tsai W，Humphrey J A C，Cornet I，et al．Experimental Measurement of Accelerated Erosion in a Slurry Pot Tester[J]．Wear，1981，68(3)：289-303．
[11]Clark H M．On the Impact Rate and Impact Energy of Particles in a Slurry Pot Erosion Tester[J]．Wear，1991，147(1)：165-183．
[12]Desale G R，Gandhi B K，Jain S C．Improvement in the Design of a Pot Tester to Simulate Erosion Wear due to Solid-liquid Mixture[J]．Wear，2005，259(1/6)：196-202．
[13]蒋娜娜，徐臻，陈大融，等．旋转圆盘空蚀试验中的硅材料破坏过程研究[J]．摩擦学学报，2007，27(4)：393-397．
Jiang Nana，Xu Zhen，Chen Darong，et al．Study on Material Damage Process of Si under Rotating Disk Test[J]．Tribology，2007，27(4)：393-397．
[14]Lin F Y，Shao H S．Effect of Impact Velocity on Slurry Erosion and a New Design of a Slurry Erosion Tester[J]．Wear，1991，143(2)：231-240．
[15]Abouel A K，Abd Y M，Emara K M，et al．Design and Performance of Slurry Erosion Tester[J]．Journal of Tribology，2010，132(2)：021601(1-10)．
[16]Dosanjh S，Humphrey J A C．The Influence of Turbulence on Erosion by a Particle-laden Fluid Jet[J]．Wear，1985，102(4)：309-330．
[17]Hawthorne H M，Xie Y，Yick S K．A New Coriolis Slurry Erosion Tester Design for Improved Slurry Dynamics[J]．Wear，2003，255(1)：170-180．
[18]Muscara J，Sinnott M J．Construction and Evaluation of a Versatile Abrasive Wear Testing Apparatus[J]．Metals Engineering Quarterly，1972，12(2)：21-23．
[19]Avery H S．Classification and Precision of Abrasion Test[C]//Wear of Materials.New York:ASME,1977:148-157.
[20]刘家睿，周平安，王小同，等．材料的冲蚀磨损与微动磨损［M］．北京：机械工业出版社，1984．
[21]Li S K，Humphrey J A C，Levy A V．Erosive Wear of Ductile Metals by a Particle-laden High Velocity Liquid Jet[J].Wear，1981，73(2)：295-309．
[22]Lin F Y，Shao H S．The Effect of Impingement Angle on Slurry Erosion[J]．Wear，1991，141(2)：279-289．
[23]鲍崇高，高义民，刑建东，等．水轮机用不锈钢材料的冲蚀磨损性能研究[J]．机械工程学报，2002，38(2)：8-10．
Bao Chonggao，Gao Yimin，Xing Jiandong，et al．Study on Erosion-wear Resistance on Steel Stainless Used in Turbine[J]．Chinese Journal of Mechanical Engineering，2002，38(2)：8-10．
[24]Levy A V，Yau P．Erosion of Steels in Liquid Slurries[J].Wear，1984，98：163-182.