面向产品创新设计的功能模块动态划分方法研究

中国机械工程 ›› 2013, Vol. 24 ›› Issue (02): 251-257.

面向产品创新设计的功能模块动态划分方法研究

陈继文1,2;张进生1;王志1;黄波1;王发凯1

1.山东大学,济南,250062
2.山东建筑大学,济南,250101

出版日期:2013-01-25 发布日期:2013-02-01
基金资助:
国家自然科学基金资助项目(51075244,51075245);山东省科学技术发展计划资助项目(2010GGX10405)
National Natural Science Foundation of China（No. 51075244,51075245）;

Shandong Provincial Science and Technology Development Program ( No. 2010GGX10405)

#br# Research on Function Module Dynamic Partition for Product Innovation Design

Chen Jiwen1,2;Zhang Jinsheng1;Wang Zhi1;Huang Bo1;Wang Fakai1

1.Shandong University,Jinan,250062
2.Shandong Jianzhu University,Jinan,250101

Online:2013-01-25 Published:2013-02-01
Supported by:

National Natural Science Foundation of China（No. 51075244,51075245）;

Shandong Provincial Science and Technology Development Program
( No. 2010GGX10405)

摘要/Abstract

摘要：

针对面向产品创新设计的功能模块划分中没有考虑技术进化的问题，从客户需求、流、技术的角度出发，研究功能模块动态划分方法。以产品的功能结构为基础，建立了功能相关矩阵。基于模糊等价矩阵的动态聚类分析，动态划分产品的功能模块。以模块内平均聚合度和模块间平均分离度来评价不同模块划分结果。多绳金刚石串珠锯功能模块动态划分实例说明了该方法具有较强的分辨性,可以进行面向产品创新设计的功能模块动态划分。


关键词: 模块划分, 创新设计, 相关矩阵, 模糊聚集分析

Abstract:

Recently,technical evolution factors are not considered in function module partition for product innovation.From the point of customer
demands,flow and technology,function module dynamic partition was researched.Function correlation matrix was established based on function structure.
The dynamic cluster analysis of fuzzy equivalence matrix was used to dynamic parting
function module.The function module partitions were evaluated by average polymerization
degree in a module and average coupling degree among modules.Example of multi wire diamond saw shows the presented dynamic module partition method has strong
distinguish ability and can be used to module dynamic partition for product innovation design.

Key words: module partition, innovation design, correlation matrix, fuzzy clustering analysis

中图分类号:

TP391

陈继文1, 2, 张进生1, 王志1, 黄波1, 王发凯1. 面向产品创新设计的功能模块动态划分方法研究[J]. 中国机械工程, 2013, 24(02): 251-257.

CHEN Ji-Wen-1, 2, ZHANG Jin-Sheng-1, WANG Zhi-1, HUANG Bei-1, WANG Fa-Kai-1. #br# Research on Function Module Dynamic Partition for Product Innovation Design[J]. China Mechanical Engineering, 2013, 24(02): 251-257.

参考文献

[1]陈旭玲[1],楼佩煌[1],唐敦兵[1],杨雷[2].概念设计中功能驱动的消化吸收再创新研究[J].计算机集成制造系统,2009,15(10):1873-1879.
[2]Exixon G, Yxkull A V, Arnstr M A. Modularity —the Basis for Product and Factory Reengineering[J]. Annals of the CIRP, 1996,45-( 1) ; 1-6.
[3]Gu P,Sosale S. Product Modularization for Life Cy-cle Engineering [ J]. Robotics and Computer Inte-grated Manufacturing, 1999,15(5) :387-401.
[4]Salhieh S M,Kamrani A K. Macro Level ProductDevelopment Using Design for Modularity[J]. Ro-bitics and Computer Integegrated Manufacturing,1999,15(4):319-329.
[5]Stone R B. Wood K L,Crawford R H. A HeuristicMethod for Identifying Modules for Product Archi-tectures[J]. Design Studies.2000,21(1) : 5-31.
[6]Tseng Hwaien,Chang Chienchen,Li Jiadiann. Mod-ular Design to Support Green Life—cycle Engineer-ing[J]. Expert Systems with Application,2008,34(4):2524-2537.
[7]王海军 [1],孙宝元 [2],王吉军 [3],魏小鹏 [3].面向大规模定制的产品模块化设计方法[J].计算机集成制造系统,2004,10(10):1171-1176.
[8]潘双夏,高飞,冯培恩.批量客户化生产模式下的模块划分方法研究[J].机械工程学报,2003,39(7):1-6.
[9]吕利勇[1],乔立红[1],王田苗[1].面向产品生命周期的产品模块化分解方法研究[J].计算机集成制造系统,2006,12(4):546-551. 5
[10]周开俊[1],李东波[1],童一飞[1].面向产品创新设计的功能模块划分方法[J].计算机辅助设计与图形学学报,2007,19(1):73-77.
[11]丁力平[1],谭建荣[1],冯毅雄[1],李中凯[1].基于解析结构模型的产品模块构建及其优化[J].计算机集成制造系统,2008,14(6):1070-1077.
[12]Gao Fei, Xiao Gang, Simpson T. Identifying Func-tional Modules Using Generalized DirectedGraphs: Definition and Application [J]. Computerin Industry,2010,61(3) : 260-269.
[13]Shibata T. Product Innovation through Module Dy-namics: a Case Study [J]. Journal of Engineeringand Technology Management, 2009 , 26 ( 1/2) : 46 -56.
[14]Morrison P D,Roberts J H,Midgley D F. The Na-ture of Lead Users and Measurement of LeadingEdge Status[J]. Research Policy .2004,33(2) : 351-362.
[15]檀润华,苑彩云,张瑞红,曹东兴.基于技术进化的产品设计过程研究[J].机械工程学报,2002,38(12):60-65.
[16]张建辉[1],檀润华[1],杨伯军[1],陈子顺[1].产品技术进化潜力预测研究[J].工程设计学报,2008,15(3):157-163.
[17]闻邦椿.机械设计手册:第6卷现代设计理论与方法[M].五版.北京:机械工业出版社,2004.
[18]李士勇.工程模糊数学及应用[M],2004.