金属切削中刀具月牙洼磨损模型的研究

中国机械工程 ›› 2012, Vol. 23 ›› Issue (2): 142-145,207.

金属切削中刀具月牙洼磨损模型的研究

毕雪峰1;刘永贤2

1.上海理工大学,上海,200093

2.东北大学,沈阳,110819

出版日期:2012-01-25 发布日期:2012-02-14
基金资助:
国家重大科技专项(20092X04001-053)
National Science and Technology Major Project ( No. 20092X04001-053)

Research on Tool Crater Wear Model in Metal Cutting

Bi Xuefeng1;Liu Yongxian2

1.University of Shanghai for Science and Technology,Shanghai,200093

2.Northeastern University,Shenyang,110819

Online:2012-01-25 Published:2012-02-14
Supported by:
National Science and Technology Major Project ( No. 20092X04001-053)

摘要/Abstract

摘要：

刀具的前刀面月牙洼磨损和后刀面磨损在刀具磨损的研究中占据同等地位,但月牙洼磨损轮廓和刀屑交界面上的切削过程变量不易测量等因素,导致真正依据月牙洼磨损测试获取月牙洼磨损模型的研究非常少。基于硬质合金刀具切削低碳钢的月牙洼磨损实验,提出了一个经验磨损模型。该模型综合了黏结磨损和扩散磨损,考虑了刀屑交界面温度和压力对月牙洼磨损的影响。研究结果表明,该模型能够分析并预测相似切削条件下的月牙洼磨损轮廓。



关键词:

金属切削, 月牙洼磨损模型, 磨损轮廓, 刀屑交界面温度

Abstract:

Tool crater wear and flank wear are dominant for cutting tool performance in metal cutting.However,researches on tool crater

wear model based on crater wear tests are rare,because crater wear profile

and cutting process variables are difficult to measure.This paper proposed an empirical crater wear model,which involved adhesive wear and diffusion

wear.Temperature and pressure distribution on tool-chip interface were considered in this model.The results give good prediction to crater wear profile under similar cutting conditions.

Key words: metal cutting, crater wear model, wear profile, temperature on tool-chip interface

中图分类号:

TG501

毕雪峰1, 刘永贤2.

金属切削中刀具月牙洼磨损模型的研究

[J]. 中国机械工程, 2012, 23(2): 142-145,207.

BI Xue-Feng-1, LIU Yong-Xian-2.

Research on Tool Crater Wear Model in Metal Cutting

[J]. China Mechanical Engineering, 2012, 23(2): 142-145,207.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2012/V23/I2/142