基于最小能量法的修复体曲面局部变形算法

中国机械工程 ›› 2012, Vol. 23 ›› Issue (18): 2194-2199.

基于最小能量法的修复体曲面局部变形算法

闫国栋1;戴宁1;廖文和1;张长东1;孙玉春2;王勇2;吕培军2

1.南京航空航天大学,南京,210016;
2.北京大学口腔医学院,北京,100081

出版日期:2012-09-25 发布日期:2012-09-29
基金资助:
国家科技支撑计划资助项目(2009BAI81B02);江苏省卫生厅医学科研项目(H201034)
The National Key Technology R&D Program（No. 2009BAI81B02）

#br# Surface Local Deformation of Restoration Based on Minimum Energy Method

Yan Guodong1;Dai Ning1;Liao Wenhe1;Zhang Changdong1;Sun Yuchun2;Wang Yong2;Lü Peijun2

1.Nanjing University of Aeronautics and Astronautics,Nanjing,210016
2.Peking University School of Stomatology,Beijing,100081

Online:2012-09-25 Published:2012-09-29
Supported by:
The National Key Technology R&D Program（No. 2009BAI81B02）

摘要/Abstract

摘要：

牙齿修复体曲面局部变形是口腔数字化修复系统的一个关键环节,决定了设计的修复体形态能否满足口腔的咬合接触关系。针对这一情况提出了基于最小能量法的修复体曲面局部变形算法,首先根据设计需要,在修复体模型上通过区域选择方式定义模型的控制句柄和变形区域,区域定义完成后,对变形矩阵进行预处理。然后通过操作控制句柄，实现修复体曲面的局部变形。最后通过双尖牙和磨牙的局部变形实例,验证了该算法的有效性和实用性。



关键词: 口腔CAD/CAM, 能量优化, 局部变形, 边界约束

Abstract:

The surface local deformation of tooth restoration is a key technology in dental CAD/CAM system,which determines whether restoration shape can fit to the patient's tooth articulation environment.Aiming at the problem,a local deformation algorithm for dental surface design based on minimum energy method was proposed.Firstly,the control handle and deformed region were defined on restoration surface with region selected tool.Secondly,the deformation matrix was preprocessed for improving computational efficiency,then the control handle was translated to complete the local deformation of restoration.Experimental results verify the effectiveness and practicability of the algorithm.

Key words: dental CAD/CAM, energy optimization, local deformation, boundary constraint

中图分类号:

TP391

闫国栋1, 戴宁1, 廖文和1, 张长东1, 孙玉春2, 王勇2, 吕培军2. 基于最小能量法的修复体曲面局部变形算法[J]. 中国机械工程, 2012, 23(18): 2194-2199.

YAN Guo-Dong-1, DAI Ning-1, LIAO Wen-He-1, ZHANG Chang-Dong-1, SUN Yu-Chun-2, WANG Yong-2, LV Pei-Jun-2. #br# Surface Local Deformation of Restoration Based on Minimum Energy Method[J]. China Mechanical Engineering, 2012, 23(18): 2194-2199.

参考文献

[1]von Schroeter P, Jurgensen B, Zollner M. Cercon Move:a Navigation Aid for Dental CAD Applica- tions [J]. International Journal of Computerized Dentistry, 2004,7 (4) : 371-377.
[2]Todorovi C A, Lazi C V. Computer Aided Design and Manufacturing of Dental Restorations--"Com- puterized Impression" Technology[J]. Stomatolos- ki Glasnik Srbije,2006,53(1) :42-53.
[3]Steger T. Digident CAD/CAM Production grow- ing with the Possibilities[J]. International Journal of Computerized Dentistry, 2004,7 ( 1 ) : 77-84.
[4]吕培军[1],李彦生[2],王勇[1],邹波[1],赵建江[1],张震康[1].国产口腔修复CAD—CAM系统的研究与开发[J].中华口腔医学杂志,2002,37(5):367-370.
[5]韩景芸[1],费仁元[1],李彦生[1],褚国民[1].基于逆向工程技术的后牙嵌体的数字化个性设计[J].机械科学与技术,2005,24(3):315-318.
[6]戴宁[1],周永耀[2],廖文和[1],俞青[3],吕培军[4],王勇[4],孙全平[1].口腔修复体模型曲面局部变形设计研究与实现[J].中国生物医学工程学报,2008,27(3):378-382.
[7]郑淑贤[1],李佳[1],孙庆丰[1].基于特征映射的义齿表面三维变形设计方法[J].机械工程学报,2011,47(3):129-134.
[8]朱心雄.自由曲线曲面造型技术[M].北京:科学出版社,2003.
[9]Demetri T, John P, Alan B, et al. Elastically Deform- able Models[C]//Proceedings of the 14th Annual Conference on Computer Graphics and Interactive Techniques. New York: ACM, 1987 : 205-214.
[10]George C, Dave G. Deformable Curve and Surface Finite--elements for Free- form Shape Design [C]//Proceedings of the 18th Annual Conference on Computer Graphics and Interactive Techniques. New York : ACM, 1991 : 257-266.
[11]Mario B, Olga S. On Linear Vatiational Surface De formation Methods[J]. IEEE Transactions on Vi sualization and Computer Graphics, 2008,14 ( 1 ): 213-230.
[12]Meyer M, Desbrun M, Schroder P, et al. Discrete Differential geometry Operators for Triangulated 2-- manifolds[C]//Visualization and Mathematics 02. Berlin : Springer-- Verlag, 2002 : 237-242.
[13]Kobbelt L, Campagna S, Vorsatz J, et al. Interactive Multi resolution Modeling on Arbitrary Meshes [C]//Proceedings of the 25th Annual Conference on Computer Graphics and Interactive Techniques. New York:ACM,1998:105-114.