面向大规模定制的动态单元装配系统设计与重构建模

中国机械工程 ›› 2012, Vol. 23 ›› Issue (18): 2187-2193.

面向大规模定制的动态单元装配系统设计与重构建模

廖世龙1,2;易树平1;高庆萱1

1.重庆大学,重庆,400030
2.西北民族大学,兰州,730030

出版日期:2012-09-25 发布日期:2012-09-29
基金资助:
国家自然科学基金资助项目（70871127);高等学校博士学科点专项科研基金资助项目(20070611027);重庆市科技攻关计划资助项目(2011GGCO27）
National Natural Science Foundation of China（No. 70871127）;

Research Fund for the Doctoral Program of Higher Education of China（No. 20070611027）;
Key Technology R&D Program of Chongqing（No. 2011GGCO27）

Modeling for Dynamic Cellular Assembly Systems Design and Reconfiguration on Mass Customization

Liao Shilong1,2;Yi Shuping1;Gao Qingxuan1

1.Chongqing University,Chongqing,400030
2.Northwest University for Nationalities,Lanzhou,730030

Online:2012-09-25 Published:2012-09-29
Supported by:

National Natural Science Foundation of China（No. 70871127）;

Research Fund for the Doctoral Program of Higher Education of China

（No. 20070611027）;
Key Technology R&D Program of Chongqing（No. 2011GGCO27）

摘要/Abstract

摘要：

针对大规模定制批量化与定制化的生产组织要求，提出采用单元装配系统在大规模定制生产中进行装配作业的思想，分析了单元装配系统在大规模定制生产中的适用性，综合考虑动态环境下系统设备重置、多能工重新指派、多周期生产计划、交货策略、招聘解雇成本等多种因素，建立了以重构成本最小为目标函数的动态单元装配系统重构的规划模型，并验证了模型的有效性。



关键词: 大规模定制, 装配单元, 系统重构, 动态

Abstract:

To solve the problem in MC that the products must be satisfied to the individual demands of customers,at the same time the customized products are similar to that of the product in mass production,a thinking was proposed that cellular assembly systems were used for assembly operations in MC.By considering the several key factors including dynamic assembly cell reconfiguration,worker assignment,multi-period production planning,backorder cost,and hiring firing cost etc.,this paper presented an integer mathematical programming model for the design of cellular assembly systems in a dynamic environment in MC.
Numerical examples were presented to demonstrate the model and its potential benefits.

Key words: mass customization(MC), assembly cell, system reconfiguration, dynamic

中图分类号:

TH181

廖世龙1, 2, 易树平1, 高庆萱1. 面向大规模定制的动态单元装配系统设计与重构建模[J]. 中国机械工程, 2012, 23(18): 2187-2193.

LIAO Shi-Long-1, 2, YI Shu-Beng-1, GAO Qiang-Xuan-1. Modeling for Dynamic Cellular Assembly Systems Design and Reconfiguration on Mass Customization[J]. China Mechanical Engineering, 2012, 23(18): 2187-2193.

参考文献

[1]祁国宁,顾新建,杨青海,余军合.大批量定制原理及关键技术研究[J].计算机集成制造系统,2003,9(9):776-783.
[2]顾新建[1],郑国君[1],朱万贵[1],崔梁萍[2].面向大批量定制生产的模块化制造系统[J].组合机床与自动化加工技术,2003(1):1-3.
[3]徐贤浩,马士华.顾客化大量生产环境下生产管理新模式的研究[J].中国机械工程,2001,12(8):897-900.
[4]苑明海[1],李东波[1],于敏建[1].面向大规模定制的混流装配线平衡研究[J].计算机集成制造系统,2008,14(1):79-83.
[5]李斌[1],陈立平[1],黄正东[1],肖人彬[1],钟毅芳[1].面向大规模定制的装配线优化调度研究[J].中国机械工程,2005,16(24):2198-2202.
[6]樊树海[1],肖田元[1],乔桂秀[1],董建华[1],张林鍹[1].大规模定制生产线的动态网络构造与仿真[J].系统仿真学报,2004,16(7):1597-1599.
[7]Bidanda B,Poonsiri A,Kim L N,et al. Human--re lated Issues in Manufacturing Cell Design, Imple mentation, and Operation: a Review and Survey[J].Computer & Industrial Engineering, 2005,48 (3): 507-523.
[8]Kaku I,Murase Y,Yin Y. A Study on Human Tasks Related Performances of Converting Conveyor As- sembly Line to Cellular Manufacturing[J]. Europe- an Journal of Industrial Engineering, 2008,2( 1 ) : 17- 34.
[9]Johnson D J. Converting Assembly Lines to Assem- bly Cells at Sheet Metal Products: Insights on Per formance Improvements[J]. International Journal of Production Research,2005,43(7) : 1483-1509.
[10]Sakazume Y. Is Japanese Cell Manufacturing a New System? a Comparative Study between Jap- anese Cell Manufacturing and Cellular Manufac turing[J]. Journal of Japan Industrial Manage- ment Association, 2005,55 (6) : 341-349.
[11]Kaku Ikou, Gong Jun, Tang Jiafu, et al. Modeling and Numerical Analysis of Line cell Conversion Problems[J]. International Journal of Production Research,2009,47(8) :2055-2078.
[12]Bratch A I,Dolgui A. Some New Results on the A- nalysis and Simulation of Bucket Brigades(Self balancing Production lanes) [ J ]. International Journal of Production Research,2009,47(2) :369- 387.
[13]Lim Y F, Yang K K. Maximizing Throughput of Bucket Brigades on Discrete Work Stations [J]. Production & Operations Management, 2009,18 (1):48-59.
[14]Nakade K, Nishiwaki R. Optimal Allocation of Heterogeneous Workers in a U- shaped Produc- tion Line[J]. Computers& Industrial Engineer ing,2008,54(3) :432-440.
[15]Wang Q, Owen G W, Mileham A R. Determining Numbers of Workstations and Operators for a Linear Walking--worker Assembly Line[J]. In- ternational Journal of Computer Integrated Manu facturing, 2007,20 ( 1 ) : 1-10.