基于E-CBP的机电产品可持续概念设计方法

中国机械工程 ›› 2012, Vol. 23 ›› Issue (13): 1603-1607.

基于E-CBP的机电产品可持续概念设计方法

王美焰1;沈连婠1;邓益民2;束学道2

1.中国科学技术大学，合肥，230027
2.宁波大学，宁波，315200

出版日期:2012-07-10 发布日期:2012-07-17
基金资助:
国家自然科学基金资助项目（50875133）
National Natural Science Foundation of China（No. 50875133）

E-CBP Based Sustainable Conceptual Design Method for Mechanical and Electrical Products

Wang Meiyan1;Shen Lianguan1;Deng Yimin2;Shu Xuedao2

1.University of Science and Technology of China, Hefei, 230027
2.Ningbo University, Ningbo, Zhejiang,315200

Online:2012-07-10 Published:2012-07-17
Supported by:
National Natural Science Foundation of China（No. 50875133）

摘要/Abstract

摘要：

在传统概念设计方法的基础上，引入可持续设计理念，提出基于E-CBP(extended casual behavioral process)模型的可持续概念设计方法。通过对行为的特性研究，提出了相应的可持续设计指导原则。根据这些原则对E-CBP模型进行优化，并以电动抛光机为实例验证了该方法的可行性。

关键词: E-CBP模型, 行为过程, 可持续设计方法, 概念设计方法

Abstract:

Based on the traditional conceptual design method, a sustainable conceptual method based on the E-CBP model was proposed by exploiting the sustainable design principles. With the study of the behavioral characteristics, several sustainable design principles were proposed. These principles were employed to optimize the sustainability of E-CBP model, and an electric polishing machine was illustrated to verify the feasibility of the method.

Key words: extended casual behavioral process(E-CBP) model, behavioral process, sustainable design method, conceptual design method

中图分类号:

王美焰1, 沈连婠1, 邓益民2, 束学道2. 基于E-CBP的机电产品可持续概念设计方法[J]. 中国机械工程, 2012, 23(13): 1603-1607.

WANG Mei-Yan-1, CHEN Lian-Guan-1, DENG Yi-Min-2, SHU Hua-Dao-2. E-CBP Based Sustainable Conceptual Design Method for Mechanical and Electrical Products[J]. China Mechanical Engineering, 2012, 23(13): 1603-1607.

参考文献

[1]Choi J K, Niew L F, Ramani K. A Framework for the Integration of Environmental and Business As- pects Toward Sustainable Product Development[J]. Journal of Engineering Design, 2008, 19(5) 431- 446.
[2]Vezzoii C, Sciama D. Life Cycle Design: from Gen- eral Methods to Product Type Specific Guidelines and Checklists.. a Method Adopted to Develop a Set of Guidelines/Checklist Handbook for the Eco--ef- ficient Design of NECTA Vending Machines [J]. Journal of Cleaner Production, 2006, 14 (15/16) : 1319-1325.
[3]Masui K, Sakao T, Kobayashi M, et al. Applying Quality Function Deployment to Environmentally Conscious Design[J]. International Journal of Qual- ity & Reliability Management, 2003, 20 (1) 90- 106.
[4]Papadoyannakis M. The EuP Directive a Frame- work for Continuous Improvement of the Environ- mental Performance of Energy- using Products [C]//Proceedings o{ the 13th CIRP International Conference on Life Cycle Engineering. Leuven CIRP, 2006: 1-4.
[5]Howarth G, Hadfield M. A Sustainable Product Design Model[J]. Materials and Design, 2006, 27 (10) :1128-1133.
[6]Dewulf W, Willems B, Duflou J R. Estimating the Environmental Profile of Early Design Concepts [C]//Innovation in Life Cycle Engineering and Sus- tainable Development. Dordrecht: Springer Nether- lands, 2006: 321-334.
[7]Devanathan S, Ramanujan D, Bernstein W Z, et al. Integration of Sustainability into Early Design through the Function Impact Matrix[J]. Journal of Mechanical Design, 2010, 132 (8) 081004.
[8]Telenko C, $eepersad C C. A Methodology for Identifying Environmentally Conscious Guidelines for Product Design[J]. Journal of Mechanical De- sign, 2010, 132(9): 091009.
[9]Deng Y M. Function and Behavior Representation in Conceptual Mechanical Design[J]. AI EDAM, 2002, 16(5) :343-362.
[10]Ulrich K T, Seering W P. Function Sharing in Mechanical Design[J]. Design Studies, 1990, 11 (4) 223-234.
[11]Trimble A Z, Lang J H, Pabon J, et al. A Device for Harvesting Energy From Rotational Vibra- tions [J]. Journal of Mechanical Design, 2010, 132(9) : 091001.

[1]	孙殿柱1;沈江华1;贾宗福1;李延瑞2;林伟1. 散乱点云局部形貌标架量化及特征识别方法[J]. 中国机械工程, 2020, 31(19): 2332-2339.
[2]	江本赤, 韩江, 田晓青, 夏链. 基于轮廓约束点的B样条曲面拟合算法[J]. 中国机械工程, 2015, 26(15): 2016-2021.
[3]	袁天然1;程筱胜2;孙全平1 . 复杂形态孔洞的网格模型修复[J]. 中国机械工程, 2015, 26(12): 1669-1675.
[4]	万能, 杜珂, 高瑾宇, 陈涛. 面向叶片电解加工分析的等几何方法[J]. 中国机械工程, 2015, 26(10): 1368-1373.
[5]	钟艳如;高文祥;黄美发. 基于本体的装配公差类型的自动生成[J]. 中国机械工程, 2014, 25(5): 684-691.
[6]	李海涛;杨波;尹晓玲;王兴祖;姚孔. 基于设计结构矩阵和着色Petri网的产品设计过程建模与仿真[J]. 中国机械工程, 2014, 25(1): 108-117.
[7]	尤飞1;胡庆夕2;朱晓锦2. 再生骨支架内部结构性能的综合评价[J]. 中国机械工程, 2013, 24(20): 2768-2774.
[8]	张广鹏, 王龙, 王永泉, 胡绪东. 基于创成设计思想的可重构机床模块设置方法[J]. 中国机械工程, 2013, 24(5): 594-599.
[9]	陈志杨1, 喻谷鸣1, 张引2. 基于点匹配的变壁厚CAD模型中间面生成[J]. 中国机械工程, 2012, 23(24): 2936-2941,2967.
[10]	甘勇. 基于静力平衡原理的三维均质实体测量方法[J]. 中国机械工程, 2012, 23(11): 1350-1353.
[11]	万能, 赵杰, 阳阳. 面向设计资源协同的服务规划关键技术研究[J]. 中国机械工程, 2012, 23(7): 822-828.
[12]	陈志杨1, 喻谷鸣1, 张引2. 基于样条链（环）的CAD模型过渡特征识别与抑制 [J]. 中国机械工程, 2011, 22(22): 2707-2711.
[13]	熊体凡, 王卫, 刘清华, 万立. 基于参数树状约束的零部件族结构模型研究 [J]. 中国机械工程, 2011, 22(17): 2067-2070,2075.
[14]	张卫国, 王雅光, 罗年猛. CAD图纸多明细表功能的研究与实现 [J]. 中国机械工程, 2011, 22(12): 1459-1465.
[15]	张胜文, 李霞, 吴春桥. 基于范例的推理在管件焊接柔性夹具设计系统中的应用研究 [J]. 中国机械工程, 2011, 22(9): 1071-1075.