一种新型齿轮的数学模型及有限元分析

中国机械工程 ›› 2012, Vol. 23 ›› Issue (12): 1451-1455.

一种新型齿轮的数学模型及有限元分析

李海翔;陈兵奎;谭儒龙

重庆大学机械传动国家重点实验室，重庆，400030

出版日期:2012-06-25 发布日期:2012-06-29
基金资助:
机器人技术与系统国家重点实验室开放基金资助项目（SKLRS-2009-MS-08）；重庆市自然科学基金资助项目（2010BB4229）
Natural Science Foundation of Chongqing（No. 2010BB4229）

Mathematical Models and Finite Element Analysis of a New Type Gear

Li Haixiang;Chen Bingkui;Tan Rulong

The State Key Laboratory of Mechanical Transmission, Chongqing University,Chongqing,400030

Online:2012-06-25 Published:2012-06-29
Supported by:

Natural Science Foundation of Chongqing（No. 2010BB4229）

摘要/Abstract

摘要：

提出了一种具有新型齿廓的“S”形齿轮。利用齿轮啮合原理，建立了“S”形齿轮的数学模型，包括“S”形齿轮的齿廓曲线方程和齿面方程，利用UnigraphicsNX、Hypermesh和ANSYS建模及有限元分析软件精确建立了“S”形齿轮的单齿啮合有限元模型，并对其进行了接触有限元分析。分析结果表明，“S”形齿轮具有传动精度高、承载能力大等优点。

关键词: &ldquo, S&rdquo, 形齿轮, 数学模型, 有限元方法, 接触应力

Abstract:

A new tooth profile gear, “S” tooth profile gear, was proposed herein. The mathematical models, including the equation of tooth profile curve and equation of tooth surface, were established based on kinematical method of meshing theory. A finite element model was established and the finite element analysis in the condition of contact was finished by UnigraphicsNX, Hypermesh and ANSYS software. The results illustrate that “S” tooth profile gear have the advantages of bearing of greater loading force, etc.

Key words: "S&rdquo, tooth profile gear;mathematical model;finite element method(FEM);contact stress

中图分类号:

TH132.429

李海翔, 陈兵奎, 谭儒龙. 一种新型齿轮的数学模型及有限元分析[J]. 中国机械工程, 2012, 23(12): 1451-1455.

LI Hai-Xiang, CHEN Bing-Kui, TAN Ru-Long. Mathematical Models and Finite Element Analysis of a New Type Gear[J]. China Mechanical Engineering, 2012, 23(12): 1451-1455.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.cmemo.org.cn/CN/

https://www.cmemo.org.cn/CN/Y2012/V23/I12/1451

参考文献

[1]李华敏韩元莹王知行.渐开线齿轮的几何原理与计算[M].北京：机械工业出版社,1985.
[2]朱景梓张展.渐开线外啮合圆柱齿轮传动[M].北京：国防工业出版社,1990.
[3]陈荣增,陈式椿,陈谌闻编著,陈谌闻主编.圆弧齿圆柱齿轮传动[M].北京:高等教育出版社,1995:202.
[4]邵家辉.圆弧齿轮[M].2版.北京:机械工业出版社,1994.
[5]卢贤缵，尚俊开.圆弧齿轮啮合原理[M],2003.
[6]李特文.齿轮啮合原理[M].2版.上海:上海科学技术出版社,1984.
[7]Litvin F L. Gear Geometry and Applied Theory [M]. 2nd ed. New York: Cambridge University Press, 2004.
[8]Zhang G H, Xu H B, Long H. Double Involute Gear with Ladder--shape Teeth[J]. Chinese Jour- nal of Mechanical Engineering, 1995, 31 (6): 47- 52.
[9]太原工学院齿轮研究室．圆弧齿轮[M]．北京：机械工业出版社，1980．
[10]王勖成.有限单元法[M].北京:清华大学出版社,2003.
[11]谢最伟[1],吴新跃[1],陈艳锋[1].人字齿轮齿面应力的接触元分析[J].机械设计,2007,24(10):25-28.
[12]HoRJ, Sauv6 R G, Meguid S A. On the Imple- mentation of Novel Generalized Nonlinear Con- straints in Explicit Finite Element Formulations [J]. Computer Technology and Applications, 2004, 482:25-31.
[13]Romlay F R M. Modeling of a Surface Contact Stress for Spur Gear Mechanism Using Static and Transient Finite Element Method[J]. Structural Durability and Health Monitoring, 2008, 4 ( 1 ) : 19- 27.
[14]Elguedj T, Gravouil A. A Mixed Augmented La- grangian- extended Finite Element Method for Modeling Elastic- plastic Fatigue Crack Growth with Unilateral Contact[J]. International Journal for Numerical Methods in Engineering, 2007, 9 (24) : 1569-1597.
[15]Un K, Spilker R L. A Penetration--based Finite Element Method for Hyperelastic 3D Biphasie Tis- sues in Contact. Part II : Finite Element Simula- tions[J]. Journal of Biomechanical Engineering, 2006,128(6) :934-942.