电热止裂相变应力及其对止裂效果的影响

中国机械工程 ›› 2011, Vol. 22 ›› Issue (8): 980-984.

电热止裂相变应力及其对止裂效果的影响

王平1,2;白象忠1

1.燕山大学,秦皇岛,066004

2.中国科学院力学研究所非线性连续介质力学国家重点实验室,北京,100080

出版日期:2011-04-25 发布日期:2011-05-04
基金资助:
国家自然科学基金资助项目(50875230)；非线性力学国家重点实验室开放基金资助项目
National Natural Science Foundation of China（No. 50875230）

Phase Transformation Stress and Its Influence for Arresting Crack Propagation Using Electro-heating Effect

Wang Ping1,2;Bai Xiangzhong1

1.Yanshan University，Qinhuangdao，Hebei，066004

2.The State Key Laboratory of Nonlinear Continuum Mechanics，Institute of Mechanics,Chinese Academy of Sciences,Beijing,100080

Online:2011-04-25 Published:2011-05-04
Supported by:
National Natural Science Foundation of China（No. 50875230）

摘要/Abstract

摘要：

对含裂纹的45钢钢板进行了电热效应裂纹止裂（简称电热正裂）实验研究，发现电热止裂后的裂纹尖端附近发生了相变，并对相变组织进行了实验观察。针对裂尖处的相变区域，进行了相变应变的X射线衍射实验测定，采用Eshelby等效夹杂模型，利用等效夹杂理论进行了放电后裂尖处的相变应力场的理论分析计算。计算结果表明，在裂尖处的相变区域，形成了相变压应力场。分析了相变压应力对止裂效果的长效影响,发现相变压应力对裂纹扩展的阻碍影响是非常明显的，其对裂纹扩展速率降低的影响更是显而易见，起到了长期限制裂纹扩展的作用。研究结果表明,电热止裂技术既具有理论的可行性,也具有实际应用的实效性。

关键词:

裂纹止裂, 电热效应, 应力场, 相变

Abstract:

An experimental investigation of arresting crack propagation

by pulse discharging to a 45# steel plate with crack was shown herein. Through the microstructure analysis near crack tip after crack prevention by using electromagnetic heating effect, it is found that the phase transformation has been occurred. Also, the residual strain of phase transformation near crack tip has gotten by X-ray diffusion method.

The theoretical calculation of the phase transformation stress was finished by Eshelby’s model of imaginary cutting method.The affection of the residual stress on the crack propagation was discussed. It is found that the residual stress will have a long term effect for crack prevention. The results obtained show that the technique of arresting crack propagation by

using electric magnetic heat effect has both academic feasibility and practicability. 

Key words:

arresting crack propagation, electromagnetic heating effect, stress field, phase transformation

中图分类号:

O346.1

王平, 白象忠.

电热止裂相变应力及其对止裂效果的影响

[J]. 中国机械工程, 2011, 22(8): 980-984.

WANG Beng, BAI Xiang-Zhong.

Phase Transformation Stress and Its Influence for Arresting Crack Propagation Using Electro-heating Effect

[J]. China Mechanical Engineering, 2011, 22(8): 980-984.

[1]	李广琪1;朱刚贤1;王丽芳2;赵亮1;石世宏1. 离焦量对中空环形激光熔覆层温度场及应力场的影响[J]. 中国机械工程, 2021, 32(05): 587-593,599.
[2]	鹿旭飞1,2;马良1,2;林鑫1,2;郑宇翔1,2. 激光立体成形TC4钛合金的热力场演化[J]. 中国机械工程, 2020, 31(10): 1246-1252.
[3]	王艳, 胡捷飞, 许光辉, 李曙生, 熊巍. 三辊非对称滚弯成形的数值仿真及试验验证[J]. 中国机械工程, 2016, 27(15): 2085-2090.
[4]	欧文豪, 袁奇, 石清鑫. 基于整机瞬态热应力场重型燃气轮机转子的寿命评估[J]. 中国机械工程, 2015, 26(7): 929-935.
[5]	付宇明, 王宁宁, 郭建龙, 郑丽娟. 含半圆形埋藏裂纹金属构件脉冲放电时应力场分析[J]. 中国机械工程, 2015, 26(4): 536-540.
[6]	付宇明;王俊丽;郑丽娟. 含埋藏裂纹构件脉冲放电相变应力分析[J]. 中国机械工程, 2014, 25(8): 1117-1121.
[7]	蔡运迪, 唐文献, 黄秋芸, 王玲玲. 水冷盘式制动器热疲劳失效有限元分析[J]. 中国机械工程, 2012, 23(22): 2726-2731.
[8]	黄海波, 陈星欣, 翁胜峰. 基于应力场强法的随机载荷作用下转向节疲劳寿命预估 [J]. 中国机械工程, 2011, 22(13): 1629-1633.
[9]	黄向明, 周志雄, 杨军, 汤爱民. 退火轴承钢磨削白层的形成机理研究 [J]. 中国机械工程, 2010, 21(24): 3018-3023.
[10]	常铁柱;张清东;黄世清;. 薄宽带钢横向瓢曲行为的解析研究[J]. J4, 2009, 20(18): 0-2259.
[11]	李成, 郑艳萍, 铁瑛. 不同荷载作用下圆孔板孔边及孔口附近应力场的仿真分析[J]. 中国机械工程, 2008, 19(1): 99-102.