基于冷却系统数值模型的发动机舱流动阻力特性研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (4): 474-478,483.

基于冷却系统数值模型的发动机舱流动阻力特性研究

袁志群1;谷正气2,3;方遒1;袁侠义3

1.厦门理工学院,厦门,361024

2.湖南工业大学,株洲,412008

3.湖南大学汽车车身先进设计制造国家重点实验室,长沙,410082

出版日期:2011-02-25 发布日期:2011-03-15
基金资助:
福建省教育厅B类科技项目(JB10150)；厦门市重大科技计划项目(3502Z20100080)；国家自然科学基金资助项目(50975083)；国家高技术研究发展计划(863计划)资助项目(2007AA04Z122)
Fujian Provincial Science and Technology for Band B Program of Ministry of Education of China（No. JB10150）;

Science and Technology Major Project of Xiamen( No. 3502Z20100080);

National Natural Science Foundation of China（No. 50975083）;
National High-tech R&D Program of China (863 Program) （No. 2007AA04Z122）

Study on Drag Characteristics for Flow Field of Underhood Based on Numerical Model of Cooling System

Yuan Zhiqun1;Gu Zhengqi2,3;Fang Qiu1;Yuan Xiayi3

1.Xiamen University of Technology, Xiamen,Fujian,361024

2.Hunan University of Technology, Zhuzhou,Hunan, 412008 3.State Key Laboratory of Advanced Design and Manufacture for Vehicle Body,Hunan University,Changsha,410082

Online:2011-02-25 Published:2011-03-15
Supported by:

Fujian Provincial Science and Technology for Band B Program of Ministry of Education of China（No. JB10150）;

Science and Technology Major Project of Xiamen( No. 3502Z20100080);

National Natural Science Foundation of China（No. 50975083）;
National High-tech R&D Program of China (863 Program) （No. 2007AA04Z122）

摘要/Abstract

摘要：

以提高汽车冷却系统效率、降低气动阻力为目的,提出一种冷却系统数值模型。对某汽车发动机舱内外流场进行了耦合数值计算,详细分析了发动机舱内部气流特性,重点研究了影响发动机舱内流阻力的关键因素。计算结果表明:发动机舱内流阻力对气动阻力影响较大,占整车气动阻力的10%左右,且随着风扇转速的增大而增大,当车速较低时变化明显,车速较高时变化不明显。当车速一定时,冷却系统阻力随风扇转速的增大而增大,散热器阻力对风扇转速变化比较敏感;当风扇转速一定时,冷却系统阻力随车速的增大而增大,冷凝器阻力对车速变化比较敏感。汽车模型的风洞实验验证了该数值计算方法的准确性。

关键词:

气动阻力, 发动机舱, 耦合数值计算, 内流阻力, 风扇转速, 冷却系统阻力

Abstract:

For the purpose of increasing the efficiency of cooling system and reducing the aerodynamic drag, a method of numerical model of cooling system instead of experimental model was proposed, which was applied to study the airflow characteristics of underhood coupling internal and external flow fields. The influence on internal drag of the underhood was studied fully. The results show that the influence of internal drag is notable on aerodynamic drag, which for the whole is about 10%. It will become bigger with the increase of speed of fan. The diversification is clear when speed of car is low, but the diversification is not clear when speed of car is high. The drag of cooling system will become bigger with the increase of speed of fan when the speed of car is constant and the drag of radiator is sensitive to speed of fan. The drag of cooling system will become bigger with the increase of speed of car when the speed of fan is constant and the drag of condenser is sensitive to speed of car. The simulation results agree well with the test data in the wind tunnel, which indicates numerical simulation for automotive aerodynamics characteristics is feasible. 

Key words:

aerodynamic drag, underhood, coupling numerical analysis, internal drag, speed of fan, cooling system darg

中图分类号:

袁志群, 谷正气, 方遒, 袁侠义.

基于冷却系统数值模型的发动机舱流动阻力特性研究

[J]. 中国机械工程, 2011, 22(4): 474-478,483.

YUAN Zhi-Qun, GU Zheng-Qi, FANG Qiu, YUAN Xia-Xi.

Study on Drag Characteristics for Flow Field of Underhood Based on Numerical Model of Cooling System

[J]. China Mechanical Engineering, 2011, 22(4): 474-478,483.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2011/V22/I4/474

[1]	唐友名1;娄渊博1,2;陈基2;李志红1;陈义2;黄秋萍2;袁志群1. SUV发动机舱热管理一维/三维联合仿真与改进[J]. 中国机械工程, 2019, 30(05): 608-614,629.
[2]	郭健忠, 罗仁宏, 王之丰, 胡溧, 吴勇. 商用车发动机舱热管理一维/三维联合仿真与试验[J]. 中国机械工程, 2016, 27(04): 526-530.
[3]	刘水长1,2;谷正气3;张勇1,3;凡遵金1. 自卸车发动机舱内热流场分析及优化[J]. 中国机械工程, 2015, 26(12): 1621-1625.
[4]	赵又群;张海滨. 含地面效应、发动机舱内流的轿车流场仿真[J]. J4, 2008, 19(17): 0-2094.