基于样条链（环）的CAD模型过渡特征识别与抑制

中国机械工程 ›› 2011, Vol. 22 ›› Issue (22): 2707-2711.

基于样条链（环）的CAD模型过渡特征识别与抑制

陈志杨1;喻谷鸣1;张引2

1.浙江工业大学，杭州，310023

2.浙江大学，杭州，310012

出版日期:2011-11-25 发布日期:2011-12-12
基金资助:
国家高技术研究发展计划(863计划)资助项目(2007AA04Z1A5)；浙江省自然科学基金资助项目(Y1090597)
National High-tech R&D Program of China (863 Program) （No. 2007AA04Z1A5）;
Zhejiang Provincial Natural Science Foundation of China（No. Y1090597）

Fillet Recognition and Suppression in CAD Model Based on Feature Chain(Ring)

Chen Zhiyang1;Yu Guming1;Zhang Yin2

1.Zhejiang University of Technology, Hangzhou, 310023

2.Zhejiang University, Hangzhou, 310012

Online:2011-11-25 Published:2011-12-12
Supported by:

National High-tech R&D Program of China (863 Program) （No. 2007AA04Z1A5）;
Zhejiang Provincial Natural Science Foundation of China（No. Y1090597）

摘要/Abstract

摘要：

提出了一种基于样条链（环）的过渡特征识别与抑制算法。该算法首先识别出模型中所有过渡特征，然后构造过渡特征面边图，依次取出其中的连通子图，建立起样条链（环），对样条链（环）依次抑制，对非样条链（环）的过渡特征按最小等半径连通子图方法抑制。研究表明，该算法能抑制变半径、等半径过渡特征且能很好地处理含有诸多样条面(非二次曲面)过渡特征的模型。

关键词:

特征识别, 特征抑制, 样条链, 连通子图

Abstract:

The paper proposed an algorithm of fillet recognition and suppression based on feature chain. Firstly, all fillets of the model were recognized. Secondly, a face-edge graph was built based on fillets, the connected subgraph was taken out successively, and the feature chain(ring) was established. According to the feature chain, the features (fillet) in the chain was suppressed. The fillets not in chain were suppressed by connected graph of minimal and with same radius.In summary,the algorithm can suppress the fillets with variable and constant radius, and the model containing non-quadric surface fillets can be suppressed well.

Key words: feature recognition, feature suppression, feature chain, connected subgraph

中图分类号:

TP391.72

陈志杨1, 喻谷鸣1, 张引2.

基于样条链（环）的CAD模型过渡特征识别与抑制

[J]. 中国机械工程, 2011, 22(22): 2707-2711.

CHEN Zhi-Yang-1, YU Gu-Ming-1, ZHANG Yin-2.

Fillet Recognition and Suppression in CAD Model Based on Feature Chain(Ring)

[J]. China Mechanical Engineering, 2011, 22(22): 2707-2711.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2011/V22/I22/2707

[1]	唐建国, 曹魏娟, 高曙明. 面向CAE的简化模型误差评估与信息重用[J]. 中国机械工程, 2012, 23(8): 961-967.
[2]	闫海兵, 李迎光, 韩雄. 飞机结构件拓扑不固定特征的自动识别 [J]. 中国机械工程, 2010, 21(13): 1567-1571.
[3]	李伟平, 郑琳, 龚志辉. 基于建模过程的加工特征识别 [J]. 中国机械工程, 2010, 21(05): 556-562.