面向工程机械远程智能监控的无线通信协议

中国机械工程 ›› 2011, Vol. 22 ›› Issue (19): 2316-2324.

面向工程机械远程智能监控的无线通信协议

金敏1;罗恩泽1;周翔2

1.湖南大学,长沙,410082

2.三一重工股份有限公司,长沙,410100

出版日期:2011-10-10 发布日期:2011-10-12
基金资助:
国家高技术研究发展计划(863计划)资助重点项目(2008AA042802)；国防科工局军用技术推广专项(2011240)；湖南省自然科学基金资助项目(07JJ6137)；中央高校基本科研业务费专项资金资助项目
National High-tech R&D Program of China (863 Program) （No. 2008AA042802）;

Hunan Provincial Natural Science Foundation of China（No. 07JJ6137）;
Fundamental Research Funds for the Central Universities

Wireless Communication Protocol for Remote Intelligent Monitoring of Construction Machinery

Jin Min1;Luo Enze1;Zhou Xiang2

1.Hunan University, Changsha, 410082

2.SANY Heavy Industry Co., Ltd., Changsha, 410100

Online:2011-10-10 Published:2011-10-12
Supported by:

National High-tech R&D Program of China (863 Program) （No. 2008AA042802）;

Hunan Provincial Natural Science Foundation of China（No. 07JJ6137）;
Fundamental Research Funds for the Central Universities

摘要/Abstract

摘要：

面向工程机械远程智能监控系统,提出一种基于UDP的无线透明传输协议CMDTP。给出了CMDTP总体体系结构,论述了CMDTP传输模式与传输数据类型、传输信道状态在线动态匹配寻优的四项关键技术。基于混凝土泵车的实际应用测试结果表明,CMDTP在数据传输品质、传输数据类型、监控规模和成本方面均可满足工程机械远程智能监控的要求,且该协议的实现不需要得到无线网络中路由节点的支持。

关键词:

工程机械, 远程智能监控, 无线通信协议, 自适应双探测帧

Abstract:

CMTDP, a wireless transparent transfer protocol based on UDP, was proposed for the remote intelligent monitoring system of construction machinery. The architecture of CMTDP was presented. The four key technologies of CMTDP were described, in which the transfer modes were matched online and optimized dynamically with the transmission data types and the transmission channel states. The test results of a practical application on concrete pump verify that CMTDP can satisfy the requirements of construction machinery on data transmission performance, transmission data types, monitoring scale and cost. The test results also show that the implementation of CMTDP does not need the support from the routing node in wireless network.

Key words:

construction machinery, remote intelligent monitoring, wireless communication protocol, self-adaptive dual-detection frame

中图分类号:

TP274

金敏1, 罗恩泽1, 周翔2.

面向工程机械远程智能监控的无线通信协议

[J]. 中国机械工程, 2011, 22(19): 2316-2324.

JIN Min-1, LUO En-Ze-1, ZHOU Xiang-2.

Wireless Communication Protocol for Remote Intelligent Monitoring of Construction Machinery

[J]. China Mechanical Engineering, 2011, 22(19): 2316-2324.

[1]	王国彪, 赖一楠, 范大鹏, 杨华勇, 王时龙. 新型精密传动机构设计与制造综述 [J]. J4, 201016, 21(16): 1891-1897.
[2]	王立存, 陈进, 张贤明, 陈国强. 基于泛函的制冷涡旋压缩机变壁厚涡旋型线理论及形状优化 [J]. J4, 201016, 21(16): 1898-1901.
[3]	李小力, 陈威, 闫蓉. 基于BP神经网络的空间轮廓误差自适应补偿 [J]. J4, 201016, 21(16): 1902-1906.
[4]	夏瑞雪, 卢荣胜, 刘宁, 董敬涛. 基于圆点阵列靶标的特征点坐标自动提取方法 [J]. J4, 201016, 21(16): 1906-1910.
[5]	陈立锋, 吴晓铃, 秦大同, 肖正明. 齿轮啮合过程摩擦功耗研究 [J]. J4, 201016, 21(16): 1911-1915.
[6]	李明磊, 贾育秦, 张学良, 刘丽琴, 杜娟, 温淑花, 兰国生. 基于多目标差异演化算法的并联机构结构优化 [J]. J4, 201016, 21(16): 1915-1920.
[7]	吴怀超, 吴白羽, 张秀华. 石蜡感温阀传热性能的数字仿真研究 [J]. J4, 201016, 21(16): 1921-1926.
[8]	鲁开讲, 师俊平, 张锋涛. 平面三自由度并联机构动力学优化设计 [J]. J4, 201016, 21(16): 1926-1931.
[9]	张敏杰, 王庆九, 管成. 并联式油液混合动力挖掘机动力系统仿真研究 [J]. J4, 201016, 21(16): 1932-1936.
[10]	刘安平, 刘济春. IPC-208B型原子力显微镜大范围扫描三维驱动系统研究 [J]. J4, 201016, 21(16): 1936-1940.
[11]	姚运萍, 王智渊. 螺栓连接受载能量损失与结合面参数识别 [J]. J4, 201016, 21(16): 1941-1943,1951.
[12]	陈建, 邓利娟. 恒力弹性机构的设计 [J]. J4, 201016, 21(16): 1944-1946.
[13]	罗洁思, 于德介, 史美丽. 基于SVD和线调频小波路径追踪的转速波动齿轮箱故障诊断 [J]. J4, 201016, 21(16): 1947-1951.
[14]	战晓磊, 辛洪兵, 汉斯·彼德　兰特斯. 基于虚拟现实的MOTOMAN-HP3型机器人运动学仿真 [J]. J4, 201016, 21(16): 1952-1954,1998.
[15]	苏厚军, 史铁林, 陈非. 高炉煤气透平机状态检修的设计与实施 [J]. J4, 201016, 21(16): 1955-1958.